A spread-spectrum clock generator (SSCG) using fractional-N phase-locked loop (PLL) with an extended range sigma-delta (ΣΔ) modulator is presented in this paper. The proposed ΣΔ modulator simply adds an extra output bit in the first stage modulator. It can enlarge the input range about three times as compared to the conventional modulator and solve the saturation problem when the input exceeds the boundary of the conventional modulator. A flexible digital modulation controller can generate center and down spread-spectrum modulation and each has spread ratios of 0.4%, 0.8%, 1.6% and 3.2%. The proposed SSCG has been fabricated in TSMC 0.35-µm double-poly quadruple-metal CMOS process with output frequency of 300 MHz. The active area is 0.630.62 mm2 and the power consumption is 17.5 mW.

A new spread spectrum clock generator (SSCG) using two-point delta-sigma modulation is presented in this paper. Not only the divider is varied, but also the voltage controlled oscillator is modulated. This technique can enhance the modulation bandwidth so that the effect of EMI suppression is improved with lower order ΣΔ modulator and can simultaneously optimize the jitter and the modulation profile. In addition, the method of two-path is applied to the loop filter to reduce the capacitance value such that the total integration can be achieved. The proposed SSCG has been fabricated in a 0.35 µm CMOS process. The clock of 400 MHz with center spread ratios of 1.25% and 2.5% are verified. The peak EMI reduction is 19.73 dB for the case of 2.5%. The size of chip area is 0.900.89 mm2.