This article proposes a simply structured transverse slot linear array antenna with a low cross-polarization in X band on a quasi-TEM (transverse electromagnetic) mode waveguide. The fabrication technology of this antenna is very simple and suitable for mass production. A center fed linear slot array has been designed and measured. The quasi-TEM wave is propagating in the conventional waveguide with dielectrics at sidewalls. The simulation and the measurement results show that the baffle plates enhance the gain and reduce the beamwidth effectively. The uncertainties of the electric properties of the dielectric and fabrication errors are also discussed.

Four calculation techniques for the Q-factor determination of resonant structures are compared on the basis of the influence of the VNA measurement uncertainty. The influence is evaluated using Monte Carlo calculations. On the basis of the deviation, the dispersion, and the effect of nearby resonances, the circle fitting method is the most appropriate technique. Although the 3dB method is the most popular technique, the Q-factors calculated by this method exhibit deviations, and the sign and amount of the deviation depend on the measurement setup. Comparisons using measurement data demonstrate that the uncertainty of the dielectric loss tangent calculated by the circle fitting method is less than a third of those calculated by the other three techniques.