Key fabrication technology for the Pt/TiO2-x/TiO2/TiO2+x/Pt nano-film memristor is investigated, including preparing platinum (Pt) electrodes and TiO2-x/TiO2/TiO2+x nano-films. The effect of oxygen flow rate and deposition rate during fabrication on O:Ti ratio of thin films is demonstrated. The fabricated nano-films with different oxygen concentration are validated by the analyzed results from X-ray photoelectron spectroscopy (XPS). The obtained memristor device shows the typical resistive switching behavior and nonvolatile memory effects. An analytical device model for Pt/TiO2-x/TiO2/TiO2+x/Pt nano-film memristor is developed based on the fundamental linear relationships between drift-diffusion velocity and the electric field, and boundary conditions are also incorporated in this model. This model is able to predict the relation between variables in the form of explicit formula, which is very critical in memristor-based circuit designs. The measurement results from real devices validate the proposed analytical device model. Some deviations of the model from the measured data are also analyzed and discussed.

With the development of network technology, next-generation networks must satisfy many new requirements for network functions and performance. The processing of overlong packet fields is one of the requirements and is also the basis for ID-based routing and content lookup, and packet field addition/deletion mechanisms. The current SDN switches do not provide good support for the processing of overlong fields. In this paper, we propose a series of optimization mechanisms for protocol-oblivious instructions, in which we address the problem of insufficient support for overlong data in existing SDN switches by extending the bit width of instructions and accelerating them using SIMD instruction sets. We also provide an intermediate representation of the protocol-oblivious instruction set to improve the efficiency of storing and reading instruction blocks, and further reduce the execution time of instruction blocks by preprocessing them. The experiments show that our approach improves the performance of overlong data processing by 56%. For instructions involving packet field addition and deletion, the improvement in performance reaches 455%. In normal forwarding scenarios, our solution reduces the packet forwarding latency by around 30%.