1-11hit |
Gengxin NING Yushen LIN Shenjie JIANG Jun ZHANG
The performance of conventional direction of arrival (DOA) methods is susceptible to the uncertainty of acoustic velocity in the underwater environment. To solve this problem, an underwater DOA estimation method with L-shaped array for wide-band signals under unknown acoustic velocity is proposed in this paper. The proposed method refers to the idea of incoherent signal subspace method and Root-MUSIC to obtain two sets of average roots corresponding to the subarray of the L-shaped array. And the geometric relationship between two vertical linear arrays is employed to derive the expression of DOA estimation with respect to the two average roots. The acoustic velocity variable in the DOA estimation expression can be eliminated in the proposed method. The simulation results demonstrate that the proposed method is more accurate and robust than other methods in an unknown acoustic velocity environment.
Wanghan LV Lihong HU Weijun ZENG Huali WANG Zhangkai LUO
As known to us all, L-shaped co-prime array (LCA) is a recently introduced two-dimensional (2-D) sparse array structure, which is extended from linear co-prime array (CA). Such sparse array geometry can be used for 2-D parameters estimation with higher degrees-of-freedom (DOF). However, in the scenario where several narrowband transmissions spread over a wide spectrum, existing technique based on LCA with Nyquist sampling may encounter a bottleneck for both analog and digital processing. To alleviate the burden of high-rate Nyquist sampling, a method of joint wideband spectrum and direction-of-arrival (DOA) estimation with compressed sampling based on LCA, which is recognized as LCA-based modulated wideband converter (MWC), is presented in this work. First, the received signal along each antenna is mixed to basebands, low-pass filtered and down-sampled to get the compressed sampling data. Then by constructing the virtual received data of 2-D difference coarray, we estimate the wideband spectrum and DOA jointly using two recovery methods where the first is a joint ESPRIT method and the other is a joint CS method. Numerical simulations illustrate the validity of the proposed LCA based MWC system and show the superiority.
Gengxin NING Shenjie JIANG Xuejin ZHAO Cui YANG
This paper presents a two-dimensional (2D) DOA algorithm for double L-shaped arrays. The algorithm is applied to the underwater environment for eliminating the performance error caused by the sound speed uncertainty factor. By introducing the third dimensional array, the algorithm eliminates the sound velocity variable in the depression angle expression, so that the DOA estimation no longer considering the true value of unknown sound velocity. In order to determine the parameters of a three-dimensional array, a parameter matching method with the double L-shaped array is also proposed. Simulations show that the proposed algorithm outperforms the conventional 2D-DOA estimation algorithm in unknown sound velocity environment.
Bandhit SUKSIRI Masahiro FUKUMOTO
This paper presents an efficient wideband two-dimensional direction-of-arrival (DOA) estimation for an L-shaped microphone array. We propose a way to construct a wideband sample cross-correlation matrix without any process of DOA preliminary estimation, such as beamforming technique, by exploiting sample cross-correlation matrices of two different frequencies for all frequency bins. Subsequently, wideband DOAs can be estimated by using this wideband matrix along with a scheme of estimating DOA in a narrowband subspace method. Therefore, a contribution of our study is providing an alternative framework for recent narrowband subspace methods to estimating the DOA of wideband sources directly. It means that this framework enables cutting-edge techniques in the existing narrowband subspace methods to implement the wideband direction estimation for reducing the computational complexity and facilitating the estimation algorithm. Theoretical analysis and effectiveness of the proposed method are substantiated through numerical simulations and experiments, which are performed in reverberating environments. The results show that performance of the proposed method performs better than others over a range of signal-to-noise ratio with just a few microphones. All these advantages make the proposed method a powerful tool for navigation systems based on acoustic signal processing.
Zhi ZHENG Yuxuan YANG Wen-Qin WANG Guangjun LI Jiao YANG Yan GE
This paper proposes a novel method for two-dimensional (2-D) direction-of-arrival (DOA) estimation of multiple signals employing a sparse L-shaped array structured by a sparse linear array (SLA), a sparse uniform linear array (SULA) and an auxiliary sensor. In this method, the elevation angles are estimated by using the SLA and an efficient search approach, while the azimuth angle estimation is performed in two stages. In the first stage, the rough azimuth angle estimates are obtained by utilizing a noise-free cross-covariance matrix (CCM), the estimated elevation angles and data from three sensors including the auxiliary sensor. In the second stage, the fine azimuth angle estimates can be achieved by using the shift-invariance property of the SULA and the rough azimuth angle estimates. Without extra pair-matching process, the proposed method can achieve automatic pairing of the 2-D DOA estimates. Simulation results show that our approach outperforms the compared methods, especially in the cases of low SNR, snapshot deficiency and multiple sources.
Ryoji YAMAUCHI Takeshi FUKUSAKO
An L-shaped probe with a surrounding aperture such as a waveguide can generate circular polarization (CP) waves. Circular waveguide antennas using an L-shaped probe have broadband characteristics both in axial ratio (AR) and in input impedance, however cross-polarization (XPOL) is easily generated due to its asymmetrical structure resulting in a radiation pattern that has narrow CP azimuth range. In this paper, design techniques to reduce the XPOL generated from a circular waveguide antenna using an L-shaped probe are proposed. As a result, XPOL is reduced by around 10 dB, and CP is radiated over a wide angle range of 120-150° covering frequencies from 7.35 to 9.75GHz.
Sang Wan KIM Woo Young CHOI Min-Chul SUN Hyun Woo KIM Jong-Ho LEE Hyungcheol SHIN Byung-Gook PARK
In order to implement complementary logic function with L-shaped tunneling field-effect transistors (TFETs), current drivability and subthreshold swing (SS) need to be improved more. For this purpose, high-k material such as hafnium dioxide (HfO2) has been used as gate dielectric rather than silicon dioxide (SiO2). The effects of device parameters on performance have been investigated and the design of L-shaped TFETs has been optimized. Finally, the performance of L-shaped TFET inverters have been compared with that of conventional TFET ones.
Qing CHANG Yongbo TAN Wei QI Dirong CHEN
This letter proposes a new transceiver for OFDM systems based on Smooth Local Trigonometric Transform (LTT). In our transceiver, the transmitter is realized by first modulating the original serial data using a constellation mapper, then feeding the results into the inverse LTT modulator. Unlike the conventional DFT-OFDM system, which always uses the roll cosine function as its window function, the proposed system needs no additional window function for the reason that LTT transform includes a bell-shaped window function by itself. Moreover, each LTT-OFDM symbol has a much more rapid attenuation rate outside of the spectral bandwidth and better spectrum convergence. In the receiver, the original data is recovered by demodulating the received data using forward LTT. Comparative simulation results from the conventional DFT-OFDM system, the system we proposed, and the recently proposed DCT based OFDM system are discussed in terms of bit error rate (BER).
Yoshio INASAWA Shinji KURODA Kenji KUSAKABE Izuru NAITO Yoshihiko KONISHI Shigeru MAKINO Makio TSUCHIYA
A design method is proposed for a low-profile dual-shaped reflector antenna for the mobile satellite communications. The antenna is required to be low-profile because of mount restrictions. However, reduction of its height generally causes degradation of antenna performance. Firstly, an initial low-profile reflector antenna with an elliptical aperture is designed by using Geometrical Optics (GO) shaping. Then a Physical Optics (PO) shaping technique is applied to optimize the gain and sidelobes including mitigation of undesired scattering. The developed design method provides highly accurate design procedure for electrically small reflector antennas. Fabrication and measurement of a prototype antenna support the theory.
Jihak JUNG Wooyoung CHOI Jaehoon CHOI
A small microstrip-fed monopole antenna using an L-shaped notch is presented for ultra wideband applications. The proposed antenna, with compact size of 15.521 mm2 including the ground plane, is designed to operate over the frequency band between 3.05 and 10.9 GHz for S11 < -10 dB. Good return loss and radiation pattern characteristics are obtained in the frequency band of interest.
Won-Jong LEE Suk-Youb KANG Hwa-Choon LEE Hyo-Dal PARK
This paper discusses the design, fabrication, and measurement of four L-shaped-slot microstrip patch antenna for HiperLan2. The prototype consists of four L-shaped slots. To obtain suitable bandwidth, the form layer is inserted between the ground plane and substrate. The design considers various important factors that include the four L-slot's length, width, position, air-gap height, and feed-point position. Once these factors are optimized, a four L-shaped slot microstrip patch antenna is fabricated and measured. The measured results of the fabricated four L-shaped slot antenna are as follows: resonant frequency is 5.35 GHz, bandwidth is approximately 8.1% (VSWR < 2.0), and gain is 8-9 dBi. The experimental far-field patterns are stable across the pass band. The 3 dB bandwidth in Elevation and Azimuth are 69and 62, respectively.