A new dual-slope ramp (DSR) reset waveform is proposed to improve the dark room contrast ratio in AC-PDPs. The proposed reset waveform has two different voltage slopes during a ramp-up period. The first voltage slope lower than the conventional ramp voltage slope plays a role in producing the priming particles under the low background luminance, which is considered to be a kind of pre-reset discharge. On the other hand, the second voltage slope higher than the conventional ramp voltage slope produces a stable reset discharge due to the presence of the priming particles, but gives rise to a slight increase in the background luminance. Thus, a bias voltage is also applied during a part of the second voltage-slope period to adjust the background luminance and address discharge characteristics. As a result, the proposed dual-slope reset waveform can lower the background luminance without causing the discharge instability, thereby improving the high dark room contrast ratio of an AC-PDP without reducing the address voltage margin.

A 14. 4-in. diagonal EL display with 640128 pixels has been developed in red/green multicolor structures by using a new phosphor layer consisting of Zn1-xMgxS:Mn and ZnS:Mn. The display is designed for 240 Hz-frame rate, enabling the luminance to be improved by a factor of two. In addition, the contrast ratio is strongly enhanced by optimizing the black background structure and color filters. Improved characteristics make it possible for the EL panel to meet the requirements for the public information display taking advantages of high-reliability, crisp image and wide-viewing angle. Furthermore, the possibility of full-color EL displays will be described on the basis of "color by white" approach.