We report the generation of time- and wavelength-interleaved optical pulses using the principle of sub-harmonic pulse gating in a dispersion-managed fiber cavity. The pulsed source has been applied to the processing of electrical and optical signals including analog-to-digital conversion, wavelength multicast, and serial-to-parallel optical data conversion.

In this paper, firstly, effects of third order dispersion (TOD) on coupled pulses are analyzed. Then, averaging method is modified and proved to be an effective way for obtaining non-radiative bi-soliton solution of the TOD perturbed nonlinear Schrodinger equation (NLSE), which models a dispersion managed (DM) optical transmission system. Finally, the obtained bi-soliton evolution behavior is studied, and compared with that of uni-soliton. With the increase of average TOD, pulse velocity of bi-soliton largely deviates from that of uni-soliton. Thus, even though TOD cannot be exactly vanished in fabrication, it is suggested to compensate average TOD as low as possible.

This study is a detailed numerical investigation on the relations between the performance of the RZ format single-channel transmission, and the chromatic dispersion of transmission fiber and pre-compensation ratio. We observed the transition from the SPM dominant low dispersion region to the intra-channel nonlinearities dominant high dispersion region, and found that the EOP is very sensitive to the pre-compensation ratio when the dispersion assumes a intermediate value. Furthermore, by analyzing the optical power-dependence of the EOP and other nonlinear impairments, we found that the amplitude fluctuation resulting from IFWM is dominant in determining the EOP in the transmission systems employing highly dispersed pulses.

The effectiveness of Aeff enlarged positive dispersion fiber (EE-PDF) and hybrid amplification configuration with erbium-doped fiber amplifier (EDFA) and fiber Raman amplifier for reducing the fiber nonlinearity and improving the transmission performance in long distance 40 Gbit/s-based WDM transmission was investigated. We have confirmed that the use of EE-PDF in modified dispersion map for 40 Gbit/s transmission is quite effective to increase the transmissible distance and have successfully demonstrated 16 40 Gbit/s WDM transmission over 2000 km with proper dispersion management. We have also confirmed that the use of distributed Raman amplification is quite effective to extend the repeater spacing. By adding the optimum Raman amplification, almost the same transmission performance was obtained with a doubled repeater spacing in long distance 40 Gbit/s-based WDM transmission.

We demonstrate, through numerical simulations, the possibility of trans-oceanic single channel transmission at 160 Gbit/s with no active control. This was achieved using short period dispersion management, which supports short pulse propagation at practical map strengths. We demonstrate that through careful selection and optimisation of the system parameters the performance of this system can be extended. We also define the tolerable limits of the system to the residual dispersion slope and polarisation mode dispersion.

We demonstrate, through numerical simulations, the possibility of trans-oceanic single channel transmission at 160 Gbit/s with no active control. This was achieved using short period dispersion management, which supports short pulse propagation at practical map strengths. We demonstrate that through careful selection and optimisation of the system parameters the performance of this system can be extended. We also define the tolerable limits of the system to the residual dispersion slope and polarisation mode dispersion.

One of the limitation factors on the achievable distance for long-haul nonlinear Return-to-Zero (RZ)-Gaussian pulse transmission on optical fiber links is timing jitter. Although it is well known that the dispersion management technique is very effective to reduce the timing jitter, comparisons among some dispersion management methods based on the timing jitter reduction have not been reported yet. In this paper, timing jitter reduction by some dispersion management methods in nonlinear RZ-Gaussian pulse transmission systems are discussed. Moreover, we will report that the amount of timing jitter at the receiver side drastically changes depending on the configuration of dispersion managed optical fiber transmission line.

We performed 10 Gbit/s optical soliton transmission experiment over 2,000 km with bit error rate of < 10-9 in a comb-like dispersion profiled fiber (CDPF) loop of 80 km amplifier spacing which corresponds to 1.8 times of dispersion distance. By reducing the average dispersion of the CDPF, error free distance of 3,000 km was obtained.

We analyze the dispersion-managed optical transmission system for the non-return-to-zero (NRZ) pulse format. First, we investigate the physical image of dispersion management by computing small-signal-based transfer functions, and summarize the dependence of transmission performance on system parameters. Next, the Q-map is computed numerically to design long-distance large-capacity dispersion-managed transmission systems for a single channel in a more detailed manner. It is shown that the third-order dispersion of fibers negatively influences transmission performance, and third-order dispersion compensation is proved to be an effective method for extending the transmission distance of high bit-rate systems. Utilizing these results, guidelines can be derived for the optimal design of long-distance large-capacity NRZ transmission systems.

We analyze the dispersion-managed optical transmission system for the non-return-to-zero (NRZ) pulse format. First, we investigate the physical image of dispersion management by computing small-signal-based transfer functions, and summarize the dependence of transmission performance on system parameters. Next, the Q-map is computed numerically to design long-distance large-capacity dispersion-managed transmission systems for a single channel in a more detailed manner. It is shown that the third-order dispersion of fibers negatively influences transmission performance, and third-order dispersion compensation is proved to be an effective method for extending the transmission distance of high bit-rate systems. Utilizing these results, guidelines can be derived for the optimal design of long-distance large-capacity NRZ transmission systems.

The propagation of solitons in a dispersion managed link can be mainly modeled with the evolution of two parameters γ and C, related to the spectral width and the chirp. Steady propagations are shown to be possible if the average dispersion lies in the anomalous domain. With the same conditions, periodical propagations are both theoretically and experimentally demonstrated. With the help of a perturbation theory, the jitter and the signal to noise ratio are theoretically evaluated. The latter is experimentally shown to be the low power limit of terrestrial systems based on non dispersion shifted fiber. Finally, wavelength and power margins of a single channel 20 Gbit/s soliton transmission over 11 amplifier spans of 102 km show that a 400 Gbit/s Wavelength Division Multiplexed transmission could be envisaged over the same distance.