A series of windows in the narrow wall of a fully-dielectric-filled rectangular waveguide to feed partially-dielectric-filled oversized-rectangular waveguide is presented. The overall structure is single-layer and 3-dimensional however; the waveguide which is uniform along the height is analyzed by the 2-dimensional method of moments and the oversized waveguide which is uniform in the longitudinal direction of the waveguide is analyzed by the 2-dimensional mode matching. It is found that utilizing simple mode conversions between the two orthogonally uniform structures is sufficient for obtaining the results similar to those of a 3-dimensional solver HFSS. The parameters for the windows designed for a uniform input division are presented. A simulation shows that a 12 window array provides a 3.5% bandwidth in terms of reflection below -20 dB. The uniform excitation of the quasi-TEM wave is confirmed in the 60 GHz band by measuring a uniform aperture field in amplitude and phase over the slotted oversized-waveguide.

This paper presents moment method analysis of a plane wave generator in an oversized rectangular waveguide; its finite size is taken into account. Power divisions of the series of coupling windows and eigenmode excitation coefficients in the oversized waveguide are quantitatively evaluated by the analysis. In order to have a better understanding of array design, the relation between these mode coefficients and the radiation patterns is discussed. Control of the mode coefficients in the oversized waveguide is directly related to the far-field radiation pattern synthesis. These calculated results are verified by measurements in the 61.25 GHz band.

A post-wall waveguide-fed parallel plate slotted array is an attractive candidate for high efficiency and mass producible planar array antennas for millimeter wave applications. For the slot design of this large sized array, a periodic boundary wall model based on the assumption of infinite array size and a parallel waveguide is used. In fact, the aperture is large but still finite (10-40 wavelength) and the TEM-like wave is perturbed due to the narrow walls at the periphery of the aperture as well as the slot coupling; antenna efficiency is affected by the size and the aspect ratio of the aperture. All these observations imply the unique defects of oversized waveguide arrays. In this paper, the aperture efficiency of post-wall waveguide arrays is assessed as a function of size and aspect ratio of the aperture for the first time, both in theory and measurement. An effective field analysis for an electrically large oversized waveguide array, developed by the author, is utilized for determining the slot excitation coefficients and aperture illumination. It is predicted that the oversized waveguide array has a potential efficiency of 80-90% if the aperture is larger than 18 wavelength on a side and the gain is more than 30 dBi. A transversely wide aperture generally provides higher efficiency than a longitudinally long aperture, provided a perfectly uniform TEM wave would be launched from the feed waveguide.