A series of windows in the narrow wall of a fully-dielectric-filled rectangular waveguide to feed partially-dielectric-filled oversized-rectangular waveguide is presented. The overall structure is single-layer and 3-dimensional however; the waveguide which is uniform along the height is analyzed by the 2-dimensional method of moments and the oversized waveguide which is uniform in the longitudinal direction of the waveguide is analyzed by the 2-dimensional mode matching. It is found that utilizing simple mode conversions between the two orthogonally uniform structures is sufficient for obtaining the results similar to those of a 3-dimensional solver HFSS. The parameters for the windows designed for a uniform input division are presented. A simulation shows that a 12 window array provides a 3.5% bandwidth in terms of reflection below -20 dB. The uniform excitation of the quasi-TEM wave is confirmed in the 60 GHz band by measuring a uniform aperture field in amplitude and phase over the slotted oversized-waveguide.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copy
Miroslav SAMARDIJA, Jiro HIROKAWA, Makoto ANDO, "Design of Narrow Wall Windows in a Waveguide to Feed Partially-Dielectric-Filled Oversized-Rectangular Waveguide Based on 2-Dimensional Analyses of Two Orthogonal Directions" in IEICE TRANSACTIONS on Communications,
vol. E93-B, no. 4, pp. 871-878, April 2010, doi: 10.1587/transcom.E93.B.871.
Abstract: A series of windows in the narrow wall of a fully-dielectric-filled rectangular waveguide to feed partially-dielectric-filled oversized-rectangular waveguide is presented. The overall structure is single-layer and 3-dimensional however; the waveguide which is uniform along the height is analyzed by the 2-dimensional method of moments and the oversized waveguide which is uniform in the longitudinal direction of the waveguide is analyzed by the 2-dimensional mode matching. It is found that utilizing simple mode conversions between the two orthogonally uniform structures is sufficient for obtaining the results similar to those of a 3-dimensional solver HFSS. The parameters for the windows designed for a uniform input division are presented. A simulation shows that a 12 window array provides a 3.5% bandwidth in terms of reflection below -20 dB. The uniform excitation of the quasi-TEM wave is confirmed in the 60 GHz band by measuring a uniform aperture field in amplitude and phase over the slotted oversized-waveguide.
URL: https://global.ieice.org/en_transactions/communications/10.1587/transcom.E93.B.871/_p
Copy
@ARTICLE{e93-b_4_871,
author={Miroslav SAMARDIJA, Jiro HIROKAWA, Makoto ANDO, },
journal={IEICE TRANSACTIONS on Communications},
title={Design of Narrow Wall Windows in a Waveguide to Feed Partially-Dielectric-Filled Oversized-Rectangular Waveguide Based on 2-Dimensional Analyses of Two Orthogonal Directions},
year={2010},
volume={E93-B},
number={4},
pages={871-878},
abstract={A series of windows in the narrow wall of a fully-dielectric-filled rectangular waveguide to feed partially-dielectric-filled oversized-rectangular waveguide is presented. The overall structure is single-layer and 3-dimensional however; the waveguide which is uniform along the height is analyzed by the 2-dimensional method of moments and the oversized waveguide which is uniform in the longitudinal direction of the waveguide is analyzed by the 2-dimensional mode matching. It is found that utilizing simple mode conversions between the two orthogonally uniform structures is sufficient for obtaining the results similar to those of a 3-dimensional solver HFSS. The parameters for the windows designed for a uniform input division are presented. A simulation shows that a 12 window array provides a 3.5% bandwidth in terms of reflection below -20 dB. The uniform excitation of the quasi-TEM wave is confirmed in the 60 GHz band by measuring a uniform aperture field in amplitude and phase over the slotted oversized-waveguide.},
keywords={},
doi={10.1587/transcom.E93.B.871},
ISSN={1745-1345},
month={April},}
Copy
TY - JOUR
TI - Design of Narrow Wall Windows in a Waveguide to Feed Partially-Dielectric-Filled Oversized-Rectangular Waveguide Based on 2-Dimensional Analyses of Two Orthogonal Directions
T2 - IEICE TRANSACTIONS on Communications
SP - 871
EP - 878
AU - Miroslav SAMARDIJA
AU - Jiro HIROKAWA
AU - Makoto ANDO
PY - 2010
DO - 10.1587/transcom.E93.B.871
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E93-B
IS - 4
JA - IEICE TRANSACTIONS on Communications
Y1 - April 2010
AB - A series of windows in the narrow wall of a fully-dielectric-filled rectangular waveguide to feed partially-dielectric-filled oversized-rectangular waveguide is presented. The overall structure is single-layer and 3-dimensional however; the waveguide which is uniform along the height is analyzed by the 2-dimensional method of moments and the oversized waveguide which is uniform in the longitudinal direction of the waveguide is analyzed by the 2-dimensional mode matching. It is found that utilizing simple mode conversions between the two orthogonally uniform structures is sufficient for obtaining the results similar to those of a 3-dimensional solver HFSS. The parameters for the windows designed for a uniform input division are presented. A simulation shows that a 12 window array provides a 3.5% bandwidth in terms of reflection below -20 dB. The uniform excitation of the quasi-TEM wave is confirmed in the 60 GHz band by measuring a uniform aperture field in amplitude and phase over the slotted oversized-waveguide.
ER -