This article presents a new design concept of a glucose oxidase (GOD) electrode as an anode for a biofuel cell based on plasma-polymerized thin film (PPF) of dimethylaminomethylferrocene (DMAMF), which plays a role as an electron transfer mediator between the active site of the enzyme and anodic electrode. The configuration of the anode is a multilayer mixture of DMAMF-PPF and GOD, in which a nano-thin DMAMF-PPF containing a redox mediator was plasma-deposited directly onto a GOD-physisorbed electrode. The optimized biofuel cell with bioanode, in a 20 mM phosphate buffer solution of pH 7.4 containing 10 mM glucose, exhibited a maximum power density of 2.7 µW/cm2 at 20. The film deposition was performed using microfabrication-compatible organic plasma, which therefore suggests this fabrication process has significant potential for enabling high throughput production of micro biofuel cells.

Endothelial cell adhesion and growth were investigated on three types of surfaces with a plasma-polymerized coating (PPC): (1) the pristine surface of a hexamethyldisiloxane (HMDS) PPC (hydrophobic, electrically neutral surface); (2) an HMDS PPC surface with nitrogen-containing plasma treatment (hydrophilic, positively charged surface); and (3) an HMDS PPC surface treated with oxygen plasma (hydrophilic, negatively charged surface). Endothelial cells grew on surface (2) but not on surfaces (1) or (3). Next, endothelial cell adhesion and growth was investigated on a surface on which 80-µm squares were micro-patterned at 160-µm intervals in a mosaic composed of two different (cell-adhesive and non-cell-adhesive) regions. Cell growth on the patterned surfaces was different from that on non-patterned surfaces. PPC was shown to be a simple process for modulating cell adhesion to surfaces.

An electron transfer mediated amperometric enzyme biosensor based on a plasma-polymerized thin film of dimethylaminomethylferrocene (DMAMFc) is reported. A nanoscale thin polymer film containing a redox mediator was plasma-deposited directly onto an electrode with physisorbed glucose oxidase (GOD). Since the redox sites were introduced in the vicinity of the reaction centers of GOD, a highly efficient electron transfer system was formed in which almost all the reaction centers of GOD were connected to redox sites of the polymer matrix. The advantages of this strategy were: no need for prior or further chemical modification of the enzyme molecules, and simplicity of design compared with the use of a conventional polymer matrix. Moreover, the fact that the film deposition was performed using a microfabrication-compatible organic plasma promised great potential for high-throughput production of bioelectronic devices.