Yoshihiro NAKA Masahiko NISHIMOTO Mitsuhiro YOKOTA
An efficient optical power splitter constructed by a metal-dielectric-metal plasmonic waveguide with a resonator structure has been analyzed. The method of solution is the finite difference time domain (FD-TD) method with the piecewise linear recursive convolution (PLRC) method. The resonator structure consists of input/output waveguides and a narrow waveguide with a T-junction. The power splitter with the resonator structure is expressed by an equivalent transmission-line circuit. We can find that the transmittance and reflectance calculated by the FD-TD method and the equivalent circuit are matched when the difference in width between the input/output waveguides and the narrow waveguide is small. It is also shown that the transmission wavelength can be adjusted by changing the narrow waveguide lengths that satisfy the impedance matching condition in the equivalent circuit.
Yoshihiro NAKA Masahiko NISHIMOTO Mitsuhiro YOKOTA
An efficient bent waveguide and an optical power splitter with a resonator constructed by a metal-dielectric-metal plasmonic waveguide have been analyzed. The method of solution is the finite difference time domain (FD-TD) method with the piecewise linear recursive convolution (PLRC) method. The resonator can be realized by utilizing impedance mismatch at the connection between a narrow waveguide and an input/output waveguide. Numerical results for the bent waveguide show that transmission bands can be controlled by adjusting the length of the narrow waveguide. We have also shown that the optical power of the power splitter is entirely distributed into the output waveguide at the resonant wavelength and its distribution ratio can be controlled.
Jun SHIBAYAMA Takuma KURODA Junji YAMAUCHI Hisamatsu NAKANO
A periodic array of InSb spheres on a substrate is numerically analyzed at terahertz frequencies. The incident field is shown to be coupled to the substrate due to the guided-mode resonance. The effect of the background refractive index on the transmission characteristics is investigated for sensor applications.
Jun SHIBAYAMA Sumire TAKAHASHI Junji YAMAUCHI Hisamatsu NAKANO
A grating consisting of a periodic array of InSb-coated dielectric cylinders on a substrate is analyzed at THz frequencies using the frequency-dependent finite-difference time-domain method based on the trapezoidal recursive convolution technique. The transmission characteristics of an infinite periodic array are investigated not only at normal incidence but also at oblique incidence. The incident field is shown to be coupled to the substrate due to the guided-mode resonance (GMR), indicating the practical application of a grating coupler. For the sensor application, the frequency shift of the transmission dip is investigated with attention to the variation of the background refractive index. It is found that the shift of the dip involving the surface plasmon resonance is almost ten times as large as that of the dip only from the GMR. We finally analyze a finite periodic array of the cylinders. The field radiation from the array is discussed, when the field propagates through the substrate. It is shown that the radiation direction can be controlled with the frequency of the propagating field.
Hiroya MORITA Hideki KAWAI Kenji TAKEHARA Naoki MATSUDA Toshihiko NAGAMURA
Photophysical properties of water-soluble porphyrin were studied in aqueous solutions with/without DNA and in DNA solid films. Ultrathin films were prepared from aqueous DNA solutions by a spin-coating method on glass or on gold nanoparticles (AuNPs). Remarkable enhancement of phosphorescence was observed for porphyrin immobilized in DNA films spin-coated on AuNPs, which was attributed to the electric field enhancement and the increased radiative rate by localized surface plasmon resonance of AuNPs.
Theerasak JUAGWON Chutiparn LERTVACHIRAPAIBOON Kazunari SHINBO Keizo KATO Toemsak SRIKHIRIN Tanakorn OSOTCHAN Akira BABA
In this work, we report the in situ growth of gold nanoparticles (AuNPs) for the improvement of a transmission surface plasmon resonance (T-SPR) sensor to detect human immunoglobulin G (IgG). Human IgG was immobilized on an activated self-assembled monolayer of 11-mercaptoundecanoic on a gold-coated grating substrate. The T-SPR system was also used to monitor the construction of sensor chips as well as the binding of IgG and anti-IgG conjugated with AuNPs. After specific adsorption with IgG, the T-SPR signal was further enhanced by the in situ growth of AuNPs bound with anti-IgG. Using AuNP conjugation and in situ growth of bound AuNPs, the sensitivity of the IgG immunosensor was improved by two orders of magnitude compared with that without conjugated AuNPs.
Jun SHIBAYAMA Tatsuyuki HARA Masato ITO Junji YAMAUCHI Hisamatsu NAKANO
The locally one-dimensional finite-difference time-domain (FDTD) method in cylindrical coordinates is extended to a frequency-dependent version. The fundamental scheme is utilized to perform matrix-operator-free formulations in the right-hand sides. For the analysis of surface plasmon polaritons propagating along a plasmonic grating, the computation time is significantly reduced to less than 10%, compared with the explicit cylindrical FDTD method.
Junji YAMAUCHI Shintaro OHKI Yudai NAKAGOMI Hisamatsu NAKANO
A plasmonic black pole (PBP) consisting of a series of touching spherical metal surfaces is analyzed using the finite-difference time-domain (FDTD) method with the periodic boundary condition. First, the wavelength characteristics of the PBP are studied under the assumption that the PBP is omnidirectionally illuminated. It is found that partial truncation of each metal sphere reduces the reflectivity over a wide wavelength range. Next, we consider the case where the PBP is illuminated with a cylindrical wave from a specific direction. It is shown that an absorptivity of more than 80% is obtained over a wavelength range of λ=500 nm to 1000 nm. Calculation regarding the Poynting vector distribution also shows that the incident wave is bent and absorbed towards the center axis of the PBP.
Jun SHIBAYAMA Yusuke WADA Junji YAMAUCHI Hisamatsu NAKANO
Two plasmonic band-bass filters are analyzed: one is a grating-type filter and the other is a slit-type filter. The former shows a band-pass characteristic with a high transmission for a two-dimensional structure, while the latter exhibits a high transmission even for a three-dimensional structure with a thin metal layer.
Daisuke INOUE Atsushi MIURA Tsuyoshi NOMURA Hisayoshi FUJIKAWA Kazuo SATO Naoki IKEDA Daiju TSUYA Yoshimasa SUGIMOTO Yasuo KOIDE
The optical properties of arrays of nanoholes and nanoslits in Al films were investigated both numerically and experimentally. The choice of Al was based on its low cost and ease of processing, in addition to the fact that it has a higher plasma frequency than gold or silver, leading to lower optical losses at wavelengths of 400 to 500nm.
Keisuke KAWACHI Kazunari SHINBO Yasuo OHDAIRA Akira BABA Keizo KATO Futao KANEKO
A quartz-crystal-microbalance (QCM) and surface-plasmon-resonance (SPR) hybrid sensor was prepared, and the depositions of polymer electrolytes layer-by-layer (LbL) films were observed in situ. The estimated thicknesses obtained from the QCM method were different from those obtained from the SPR method. This was estimated to be caused by film swelling and water contained in the film.
Hathaithip NINSONTI Kazuma HARA Supeera NOOTCHANAT Weerasak CHOMKITICHAI Akira BABA Sukon PHANICHPHANT Kazunari SHINBO Keizo KATO Futao KANEKO
The fabrication of a grating structure formed by a solid-state electrolyte layer on a dye-TiO$_{2}$ film by the nanoimprinting technique using a polydimethylsiloxane (PDMS) stamp and its application in photoelectric conversion devices are described. The PDMS grating pattern is imprinted from blu-ray disc recordable. A silver electrode was deposited on the patterned solid-state electrolyte layers. Surface plasmon resonance (SPR) excitation was observed in the fabricated solar cells by irradiation with white light. The photoelectric conversion properties were measured to study the effect of the two types of SPR excitations, i.e., the propagating surface plasmon on the Ag grating surface and the localized surface plasmon from the Au nanoparticles on TiO$_{2}$.
The main purpose of this paper is to apply the boundary integral equation (BIE) method to the analysis of spoof localized surface plasmons (spoof LSPs) excited in a perfectly conducting cylinder with longitudinal corrugations. Frequency domain BIE schemes based on electric field integral equation (EFIE), magnetic field integral equation (MFIE) and combined field integral equation (CFIE) formulations are used to solve two-dimensional electromagnetic (EM) problems of scattering from the cylinder illuminated by a transverse electric plane wave. In this approach effects of spoof LSPs are included in the secondary surface current and charge densities resulting from the interaction between the plane wave and the cylinder. Numerical results obtained with the BIE schemes are validated by comparison with that of a recently proposed modal solution based on the metamaterial approximation.
Min Woo RYU Sung-Ho KIM Hee Cheol HWANG Kibog PARK Kyung Rok KIM
In this paper, we present the validity and potential capacity of a modeling and simulation environment for the nonresonant plasmonic terahertz (THz) detector based on the silicon (Si) field-effect transistor (FET) with a technology computer-aided design (TCAD) platform. The nonresonant and “overdamped” plasma-wave behaviors have been modeled by introducing a quasi-plasma electron charge box as a two-dimensional electron gas (2DEG) in the channel region only around the source side of Si FETs. Based on the coupled nonresonant plasma-wave physics and continuity equation on the TCAD platform, the alternate-current (AC) signal as an incoming THz wave radiation successfully induced a direct-current (DC) drain-to-source output voltage as a detection signal in a sub-THz frequency regime under the asymmetric boundary conditions with a external capacitance between the gate and drain. The average propagation length and density of a quasi-plasma have been confirmed as around 100 nm and 11019/cm3, respectively, through the transient simulation of Si FETs with the modulated 2DEG at 0.7 THz. We investigated the incoming radiation frequency dependencies on the characteristics of the plasmonic THz detector operating in sub-THz nonresonant regime by using the quasi-plasma modeling on TCAD platform. The simulated dependences of the photoresponse with quasi-plasma 2DEG modeling on the structural parameters such as gate length and dielectric thickness confirmed the operation principle of the nonresonant plasmonic THz detector in the Si FET structure. The proposed methodologies provide the physical design platform for developing novel plasmonic THz detectors operating in the nonresonant detection mode.
Hathaithip NINSONTI Weerasak CHOMKITICHAI Akira BABA Wiyong KANGWANSUPAMONKON Sukon PHANICHPHANT Kazunari SHINBO Keizo KATO Futao KANEKO
We report enhanced photocurrent properties of dye/Au-loaded titanium dioxide (TiO2) films on Au gratings. Au-loaded TiO2 nanopowders were first synthesized by a modified sol-gel method and then prepared by the impregnation method. We also fabricated dye-sensitized solar cells, which were composed of Au grating/Au-TiO2/TMPyP-SCC LbL (20 bilayers)/electrolyte/ITO substrates. Short-circuit photo-current measurements showed that Au-loaded TiO2 with grating-coupled surface plasmon excitation can enhance the short-circuit photocurrentof the fabricated cells.
Shun Lien CHUANG Chi-Yu NI Chien-Yao LU Akira MATSUDAIRA
We present the theory and experiment of metal-cavity nanolasers and nanoLEDs flip-chip bonded to silicon under electrical injection at room temperature. We first review the recent progress on micro- and nanolasers. We then present the design rule and our theoretical model. We show the experimental results of our metal-cavity surface-emitting microlasers and compare with our theoretical results showing an excellent agreement. We found the important contributions of the nonradiative recombination currents including Auger recombination, surface recombination, and leakage currents. Finally, experimental demonstration of electrical injection nanoLEDs toward subwavelength nanoscale lasers is reported.
Michinari SHIMODA Toyonori MATSUDA Kazunori MATSUO Yoshitada IYAMA
The cause-and-effect relation between plasmon-resonance absorption and surface wave in a sinusoidal metal grating is investigated. By introducing an equivalent impedance model, similar to an equivalent circuit on an electric circuit, which is an impedance boundary value problem on the fictitious surface over the grating, we estimate the surface wave from the eigen field of the model by using the resonance property of the scattered field. Through numerical examples, we illustrate that the absorption in the grating occurs in the condition of exciting the surface wave along the model, and the real part of the surface impedance is negative on about half part of the fictitious surface in the condition.
Naoki IKEDA Yoshimasa SUGIMOTO Masayuki OCHIAI Daijyu TSUYA Yasuo KOIDE Daisuke INOUE Atsushi MIURA Tsuyoshi NOMURA Hisayoshi FUJIKAWA Kazuo SATO
We investigated optical transmission characteristics of aluminum thin films with periodic hole arrays in sub-wavelength. We divided white light into several color spectra using a color filter based on the surface plasmon resonance (SPR) utilizing aluminum showing high plasma frequency. By optimizing a hole-array period, hole shape, polarization and index difference of two surface, transmittance of 30% and full-width at half-maximum of around 100 nm were achieved.
Kiyoshi ASAKAWA Yoshimasa SUGIMOTO Naoki IKEDA Daiju TSUYA Yasuo KOIDE Yoshinori WATANABE Nobuhiko OZAKI Shunsuke OHKOUCHI Tsuyoshi NOMURA Daisuke INOUE Takayuki MATSUI Atsushi MIURA Hisayoshi FUJIKAWA Kazuo SATO
This paper reviews our recent activities on nanophotonics based on a photonic crystal (PC)/quantum dot (QD)-combined structure for an all-optical device and a metal/semiconductor composite structure using surface plasmon (SP) and negative refractive index material (NIM). The former structure contributes to an ultrafast signal processing component by virtue of new PC design and QD selective-area-growth technologies, while the latter provides a new RGB color filter with a high precision and optical beam-steering device with a wide steering angle.
Futao KANEKO Akira BABA Kazunari SHINBO Keizo KATO
In this review, we introduce a variety of surface sensitive techniques for the study of organic thin films, and applications to organic devices. These studies include surface plasmon emission light, organic thin film transistors, combination of quartz crystal microbalance and optical waveguide spectroscopy, evaluation of alignment of liquid crystal molecules at surfaces, and biosensor applications.