In recent years, checking sleep quality has become essential from a healthcare perspective. In this paper, we propose a respiratory rate (RR) monitoring system that can be used in the bedroom without wearing any sensor devices directly. To develop the system, passive radio-frequency identification (RFID) tags are introduced and attached to a blanket, instead of attaching them to the human body. The received signal strength indicator (RSSI) and phase values of the passive RFID tags are continuously obtained using an RFID reader through antennas located at the bedside. The RSSI and phase values change depending on the respiration of the person wearing the blanket. Thus, we can estimate the RR using these values. After providing an overview of the proposed system, the RR estimation flow is explained in detail. The processing flow includes noise elimination and irregular breathing period estimation methods. The evaluation demonstrates that the proposed system can estimate the RR and respiratory status without considering the user's body posture, body type, gender, or change in the RR.

After a natural disaster it is critical to urgently find victims buried under collapsed buildings. Most people habitually carry smartphones with them. Smartphones have a feature that periodically transmits Wi-Fi signals called “Probe Requests” to connect with access points. Moreover, smartphones transmit “Clear to Send” when they receive a “Request to Send” alert. This motivated us to develop a hand-held smartphone finder system that integrates a novel method for accurately locating a smartphone using the Wi-Fi signals, to support rescue workers. The system has a unique graphical user interface that tracks target smartphones. Thus, rescue workers can easily reach victims who have their smartphones with them under collapsed buildings. In this paper, after introducing the localization method, the system architecture of the smartphone finder and its prototype system are described, along with some experimental results that demonstrate the effectiveness of the smartphone finder prototype.

In this paper, we propose a WiFi-based indoor positioning system using a fingerprint method, whose database is constructed with estimated reference locations. The reference locations and their information, called data sets in this paper, are obtained by moving reference devices at a constant speed while gathering information of available access points (APs). In this approach, the reference locations can be estimated using the velocity without any precise reference location information. Therefore, the cost of database construction can be dramatically reduced. However, each data set includes some errors due to such as the fluctuation of received signal strength indicator (RSSI) values, the device-specific WiFi sensitivities, the AP installations, and removals. In this paper, we propose a method to merge data sets to construct a consistent database suppressing such undesired effects. The proposed approach assumes that the intervals of reference locations in the database are constant and that the fingerprint for each reference location is calculated from multiple data sets. Through experimental results, we reveal that our approach can achieve an accuracy of 80%. We also show a detailed discussion on the results related parameters in the proposed approach.

Our goal is to use a single passive moving sensor to determine the locations of multiple radio stations. The conventional method uses only direction-of-arrival (DOA) measurements, and its performance is poor when emitters are located closely in the lateral direction, even if they are not close in the range direction, or in the far field from the moving sensor, resulting in similar DOAs for several emitters. This paper proposes a new method that uses the power of the received signals as well as DOA. The received signal power is a function of the inverse of the squared distance between an emitter and the moving sensor. This has the advantage of providing additional information in the range direction; therefore, it can be used for data association as additional information when emitter ranges are different from each other. Simulations showed that the success rate of the conventional method is 73%, whereas that of the proposed method is 97%, an overall 24-percentage-point improvement. The localization error of the proposed method is also reduced to half that of the conventional method. We further investigated its performance with different emitter and sensor configurations. In all cases, the proposed method proved superior to the conventional method.

A low-power low-noise intermediate-frequency (IF) circuit is proposed for Gaussian frequency shift keying (GFSK) low-IF receivers. The proposed IF circuit is realized by an all-analog architecture composed of a couple of limiting amplifiers (LAs) and received signal strength indicators (RSSIs), a couple of band-pass filters (BPFs), a frequency detector (FD), a low-pass filter (LPF) and a slicer. The LA and RSSI are realized by an optimized combination of folded amplifiers and current subtractor based rectifiers to avoid the process induced depressing on accuracy. In addition, taking into account the nonlinearity and static current of rectifiers, we propose an analytical model as an accurate approximation of RSSIs' transfer character. An active-RC based GFSK demodulation scheme is proposed, and then both low power consumption and a large dynamic range are obtained. The chip is implemented with HJTC 0.18 µm CMOS technology and measured under an intermediate frequency of 200 kHz, a data rate of 100 kb/s and a modulation index of 1. The RSSI has a dynamic range of 51 dB with a logarithmic linearity error of less than 1 dB, and the slope is 23.9 mV/dB. For 0.1% bit error ratio (BER), the proposed IF circuit has the minimum input signal-to-noise ratio (SNR) of 5 dB and an input dynamic range of 55.4 dB, whereas it can tolerate a frequency offset of -3%+9.5% at 6 dB input SNR. The total power consumption is 5.655.89 mW.