This letter deals with the joint direction of arrival and direction of departure estimation problem for overloaded target in bistatic multiple-input multiple-output radar system. In order to achieve the purpose of effective estimation, the presented Khatri-Rao (KR) MUSIC estimator with the ability to handle overloaded targets mainly combines the subspace characteristics of the target reflected wave signal and the KR product based on the array response. This letter also presents a computationally efficient KR noise subspace projection matrix estimation technique to reduce the computational load due to perform high-dimensional singular value decomposition. Finally, the effectiveness of the proposed method is verified by computer simulation.

This paper proposes multi-input physical layer network coding (multi-input PLNC) for high speed wireless communication in two-dimensional wireless multihop networks. In the proposed PLNC, all the terminals send their packets simultaneously for the neighboring relays to maximize the network throughput in the first slot, and all the relays also do the same to the neighboring terminals in the second slot. Those simultaneous signal transmissions cause multiple signals to be received at the relays and the terminals. Signal reception in the multi-input PLNC uses multichannel filtering to mitigate the difficulties caused by the multiple signal reception, which enables the two-input PLNC to be applied. In addition, a non-linear precoding is proposed to reduce the computational complexity of the signal detection at the relays and the terminals. The proposed multi-input PLNC makes all the terminals exchange their packets with the neighboring terminals in only two time slots. The performance of the proposed multi-input PLNC is confirmed by computer simulation. The proposed multi-input physical layer network coding achieves much higher network throughput than conventional techniques in a two-dimensional multihop wireless network with 7 terminals. The proposed multi-input physical layer network coding attains superior transmission performance in wireless hexagonal multihop networks, as long as more than 6 antennas are placed on the terminals and the relays.

Millimeter wave (mmWave) massive Multiple-Input Multiple-Output (MIMO) systems generally adopt hybrid precoding combining digital and analog precoder as an alternative to full digital precoding to reduce RF chains and energy consumption. In order to balance the relationship between spectral efficiency, energy efficiency and hardware complexity, the hybrid-connected system structure should be adopted, and then the solution process of hybrid precoding can be simplified by decomposing the total achievable rate into several sub-rates. However, the singular value decomposition (SVD) incurs high complexity in calculating the optimal unconstrained hybrid precoder for each sub-rate. Therefore, this paper proposes PAST, a low complexity hybrid precoding algorithm based on projection approximate subspace tracking. The optimal unconstrained hybrid precoder of each sub-rate is estimated with the PAST algorithm, which avoids the high complexity process of calculating the left and right singular vectors and singular value matrix by SVD. Simulations demonstrate that PAST matches the spectral efficiency of SVD-based hybrid precoding in full-connected (FC), hybrid-connected (HC) and sub-connected (SC) system structure. Moreover, the superiority of PAST over SVD-based hybrid precoding in terms of complexity and increases with the number of transmitting antennas.

Zero-shot learning (ZSL) aims to classify images of unseen classes by learning relationship between visual and semantic features. Existing works have been improving recognition accuracy from various approaches, but they employ computationally intensive algorithms that require iterative optimization. In this work, we revisit the primary approach of the pattern recognition, ı.e., nearest neighbor classifiers, to solve the ZSL task by an extremely simple and fast way, called SimpleZSL. Our algorithm consists of the following three simple techniques: (1) just averaging feature vectors to obtain visual prototypes of seen classes, (2) calculating a pseudo-inverse matrix via singular value decomposition to generate visual features of unseen classes, and (3) inferring unseen classes by a nearest neighbor classifier in which cosine similarity is used to measure distance between feature vectors. Through the experiments on common datasets, the proposed method achieves good recognition accuracy with drastically small computational costs. The execution time of the proposed method on a single CPU is more than 100 times faster than those of the GPU implementations of the existing methods with comparable accuracies.

In this Letter, we propose a blind and robust multiple watermarking scheme using Contourlet transform and singular value decomposition (SVD). The host image is first decomposed by Contourlet transform. Singular values of Contourlet coefficient blocks are adopted to embed watermark information, and a fast calculation method is proposed to avoid the heavy computation of SVD. The watermark is embedded in both low and high frequency Contourlet coefficients to increase the robustness against various attacks. Moreover, the proposed scheme intrinsically exploits the characteristics of human visual system and thus can ensure the invisibility of the watermark. Simulation results show that the proposed scheme outperforms other related methods in terms of both robustness and execution time.

Fast computation of singular value decomposition (SVD) is of great interest in various machine learning tasks. Recently, SVD methods based on randomized linear algebra have shown significant speedup in this regime. For processing large-scale data, computing systems with accelerators like GPUs have become the mainstream approach. In those systems, access to the input data dominates the overall process time; therefore, it is needed to design an out-of-core algorithm to dispatch the computation into accelerators. This paper proposes an accurate two-pass randomized SVD, named block randomized SVD (BRSVD), designed for matrices with a slow-decay singular spectrum that is often observed in image data. BRSVD fully utilizes the power of modern computing system architectures and efficiently processes large-scale data in a parallel and out-of-core fashion. Our experiments show that BRSVD effectively moves the performance bottleneck from data transfer to computation, so that outperforms existing randomized SVD methods in terms of speed with retaining similar accuracy.

In order to solve the problem in Automatic Identification System (AIS) that the signal in the target slot cannot be correctly received due to partial overlap of signals in adjacent time slots, the paper introduces a new criterion: maximum expected signal power (MESP) and proposes a novel beamforming algorithm based on generalized singular value decomposition (GSVD) and orthogonal projection. The algorithm employs GSVD to estimate the signal subspace, and adopts orthogonal projection to project the received signal onto the orthogonal subspace of the non-target signal. Then, beamforming technique is used to maximize the output power of the target signal on the basis of MESP. Theoretical analysis and simulation results show the effectiveness of the proposed algorithm.

Multiuser massive multi-input multi-output (MU massive MIMO) is considered as a promising technology for the fifth generation (5G) of the wireless communication system. In this paper, we propose a low-complexity joint antenna and user selection scheme with block diagonalization (BD) precoding for MU massive MIMO downlink channel in the time division duplex (TDD) system. The base station (BS) is equipped with a large-scale transmit antenna array while each user is using the single receive antenna in the system. To reduce the hardware cost, BS will be implemented by limited number of radio frequency (RF) chains and BS must activate some selected transmit antennas in the BS side for data transmitting and some users' receive antennas in user side for data receiving. To achieve the reduction in the computation complexity in the antenna and user selection while maintaining the same or higher sum-rate in the system, the proposed scheme relies on three complexity reduction key factors. The first key factor is that finding the average channel gains for the transmit antenna in the BS side and the receive antenna in the user side to select the best channel gain antennas and users. The second key factor called the complexity control factor ξ(Xi) for the antenna set and the user set limitation is used to control the complexity of the brute force search. The third one is that using the assumption of the point-to-point deterministic MIMO channel model to avoid the singular value decomposition (SVD) computation in the brute force search. We show that the proposed scheme offers enormous reduction in the computation complexity while ensuring the acceptable performance in terms of total system sum-rate compared with optimal and other conventional schemes.

This paper presents an efficient acceleration algorithm for Lloyd-type k-means clustering, which is suitable to a large-scale and high-dimensional data set with potentially numerous classes. The algorithm employs a novel projection-based filter (PRJ) to avoid unnecessary distance calculations, resulting in high-speed performance keeping the same results as a standard Lloyd's algorithm. The PRJ exploits a summable lower bound on a squared distance defined in a lower-dimensional space to which data points are projected. The summable lower bound can make the bound tighter dynamically by incremental addition of components in the lower-dimensional space within each iteration although the existing lower bounds used in other acceleration algorithms work only once as a fixed filter. Experimental results on large-scale and high-dimensional real image data sets demonstrate that the proposed algorithm works at high speed and with low memory consumption when large k values are given, compared with the state-of-the-art algorithms.

This paper proposes a novel access technique that enables uplink multiuser multiple input multiple output (MU-MIMO) access with small overhead in distributed wireless networks. The proposed access technique introduces a probe packet that is sent to all terminals to judge whether they have the right to transmit their signals or not. The probe packet guarantees high quality MU-MIMO signal transmission when a minimum mean square error (MMSE) filter is applied at the access point, which results in high frequency utilization efficiency. Computer simulation reveals that the proposed access achieves more than twice of the capacity obtained by the traditional carrier sense multiple access/collision avoidance (CSMA/CA) with a single user MIMO, when the access point with 5 antennas is surrounded by the terminals with 2 antennas.

This paper proposes an image denoising method using singular value decomposition (SVD) with block-rotation-based operations in wavelet domain. First, we decompose a noisy image to some sub-blocks, and use the single-level discrete 2-D wavelet transform to decompose each sub-block into the low-frequency image part and the high-frequency parts. Then, we use SVD and rotation-based SVD with the rank-1 approximation to filter the noise of the different high-frequency parts, and get the denoised sub-blocks. Finally, we reconstruct the sub-block from the low-frequency part and the filtered the high-frequency parts by the inverse wavelet transform, and reorganize each denoised sub-blocks to obtain the final denoised image. Experiments show the effectiveness of this method, compared with relevant methods.

A method is proposed for improving the accuracy of the characteristic basis function method (CBFM) using the multilevel approach. With this technique, CBFs taking into account multiple scattering calculated for each block (IP-CBFs; improved primary CBFs) are applied to CBFM using a multilevel approach. By using IP-CBFs, the interaction between blocks is taken into account, and thus it is possible to reduce the number of CBFs while maintaining accuracy, even if the multilevel approach is used. The radar cross section (RCS) of a cube, a cavity, and a dielectric sphere were analyzed using the proposed CBFs, and as a result it was found that accuracy is improved over the conventional method, despite no major change in the number of CBFs.

This paper proposes a blind, inaudible, robust digital-audio watermarking scheme based on singular-spectrum analysis, which relates to watermarking techniques based on singular value decomposition. We decompose a host signal into its oscillatory components and modify amplitudes of some of those components with respect to a watermark bit and embedding rule. To improve the sound quality of a watermarked signal and still maintain robustness, differential evolution is introduced to find optimal parameters of the proposed scheme. Test results show that, although a trade-off between inaudibility and robustness still persists, the difference in sound quality between the original and the watermarked one is considerably smaller. This improved scheme is robust against many attacks, such as MP3 and MP4 compression, and band-pass filtering. However, there is a drawback, i.e., some music-dependent parameters need to be shared between embedding and extraction processes. To overcome this drawback, we propose a method for automatic parameter estimation. By incorporating the estimation method into the framework, those parameters need not to be shared, and the test results show that it can blindly decode watermark bits with an accuracy of 99.99%. This paper not only proposes a new technique and scheme but also discusses the singular value and its physical interpretation.

This paper describes a fast and effective algorithm for refining the parameter estimates of multicomponent third-order polynomial phase signals (PPSs). The efficiency of the proposed algorithm is accompanied by lower signal-to-noise ratio (SNR) threshold, and computational complexity. A two-step procedure is used to estimate the parameters of multicomponent third-order PPSs. In the first step, an initial estimate for the phase parameters can be obtained by using fast Fourier transformation (FFT), k-means algorithm and three time positions. In the second step, these initial estimates are refined by a simple moving average filter and singular value decomposition (SVD). The SNR threshold of the proposed algorithm is lower than those of the non-linear least square (NLS) method and the estimation refinement method even though it uses a simple moving average filter. In addition, the proposed method is characterized by significantly lower complexity than computationally intensive NLS methods. Simulations confirm the effectiveness of the proposed method.

Electromagnetic emissions leak confidential data of cryptographic devices. Electromagnetic Analysis (EMA) exploits such emission for cryptanalysis. The performance of EMA dramatically decreases when correlated noise, which is caused by the interference of clock network and exhibits strong correlation with encryption signal, is present in the acquired EM signal. In this paper, three techniques are proposed to reduce the correlated noise. Based on the observation that the clock signal has a high variance at the signal edges, the first technique: single-sample Singular Value Decomposition (SVD), extracts the clock signal with only one EM sample. The second technique: multi-sample SVD is capable of suppressing the clock signal with short sampling length. The third one: averaged subtraction is suitable for estimation of correlated noise when background samplings are included. Experiments on the EM signal during AES encryption on the FPGA and ASIC implementation demonstrate that the proposed techniques increase SNR as much as 22.94 dB, and the success rates of EMA show that the data-independent information is retained and the performance of EMA is improved.

Quantification of the hip cartilages is clinically important. In this study, we propose an automatic technique for segmentation and visualization of the acetabular and femoral head cartilages based on clinically obtained multi-slice T1-weighted MR data and a hybrid approach. We follow a knowledge based approach by employing several features such as the anatomical shapes of the hip femoral and acetabular cartilages and corresponding image intensities. We estimate the center of the femoral head by a Hough transform and then automatically select the volume of interest. We then automatically segment the hip bones by a self-adaptive vector quantization technique. Next, we localize the articular central line by a modified canny edge detector based on the first and second derivative filters along the radial lines originated from the femoral head center and anatomical constraint. We then roughly segment the acetabular and femoral head cartilages using derivative images obtained in the previous step and a top-hat filter. Final masks of the acetabular and femoral head cartilages are automatically performed by employing the rough results, the estimated articular center line and the anatomical knowledge. Next, we generate a thickness map for each cartilage in the radial direction based on a Euclidian distance. Three dimensional pelvic bones, acetabular and femoral cartilages and corresponding thicknesses are overlaid and visualized. The techniques have been implemented in C++ and MATLAB environment. We have evaluated and clarified the usefulness of the proposed techniques in the presence of 40 clinical hips multi-slice MR images.

In this paper, we present a forecasting method for the view of Mt. Fuji as an application of Earth observation data (EOD) obtained by satellites. We defined the Mt. Fuji viewing index (FVI) that characterises how well the mountain looks on a given day, based on photo data produced by a fixed-point observation. A long-term predictor of FVI, ranging from 0 to 30 days, was constructed through support vector machine regression on climate and earth observation data. It was found that the aerosol mass concentration (AMC) improves prediction performance, and such performance is particularly significant in the long-term range.

Eigen-beamforming (EB) transmission for multiple-input multiple-output (MIMO) systems is an effective means to maximize the receiver signal-to-noise ratio (SNR) in a noise-limited environment, but suffers a performance degradation when strong interference signals exist. In this letter, we propose an interference cancellation method for EB signals by constructing a new receive beamforming vector which jointly utilizes the EB matrix and minimum mean-square error (MMSE) spatial demultiplexing. The proposed method is shown to outperform the conventional EB receiver in the entire cell range, with a significant increase in the effective signal-to-interference plus noise ratio (SINR) near the cell boundary.

In this letter, we propose a novel singular value decomposition zero-forcing beamforming (SVD-ZFBF) relaying scheme in the multiuser downlink MIMO broadcasting channel with fixed relays. Based on the processing scheme, we apply SUS [5] to select users at the relay station (RS) and develop a joint power allocation strategy at the base station (BS) and RS. By increasing the power at RS or selecting active users to obtain more multiuser diversity, SVD-ZFBF can approach an upper bound and outperform SVD-ZFDPC [1] with much lower complexity. Moreover, we show that the noise power ratio of RS to users significantly impacts the performance.

In this paper, we propose a method for selecting n-mode singular vectors in higher-order singular value decomposition. We select the minimum number of n-mode singular vectors, when the upper bound of a least-squares cost function is thresholded. The reduced n-ranks of all modes of a given tensor are determined automatically and the tensor is represented with the minimum number of dimensions. We apply the selection method to simultaneous low rank approximation of matrices. Experimental results show the effectiveness of the n-mode singular vector selection method.