1-1hit |
Yousuke TAJIMA Yoshihide YAMADA
In the Intelligent Transportation System, millimeter waves are used and antennas are required beam scanning ability. In the millimeter wave operation, a lens antenna is one of the prominent candidates which achieves wide angle beam scanning. Wide angle scanning can be achieved by introducing Abbe sine condition to lens surface shaping. Authors designed the shaped lens antenna that could achieve beam scanning 30. The narrow beam widths were maintained on the scanning plane. However, the beam widths were broadened on the transverse plane and large gain reduction was appeared. It was clarified that the reason of this beam deterioration was due to the phase delay on the antenna aperture. In this paper, an array feed composed of a group of rectangular horns is employed to compensate the phase delay on the antenna aperture. In designing the array feed, because there were no examples of phase radiation pattern synthesis, a new radiation pattern synthesis method is studied. Ability of the weighting matrix contained in the Least Mean Square synthesis method is paid attention. Adequate weighting matrix is found out. Satisfactory phase radiation pattern that can compensate the phase delay and an adequate amplitude radiation pattern are achieved. As a result, the improvement of scanned beam widths and antenna gains through the array feed are ensured. And adequate horn arrangements of the array feed for improving scanned beam are clarified. Moreover, in order to examine the realization of an actual array feed, the exact electromagnetic simulation is conducted. The validity of the radiation pattern synthesis is clarified.