Standing Wave Radar Capable of Measuring Distances down to Zero Meters

Tetsuji UEBO, Yoshihiro OKUBO, Tadamitsu IRITANI

Summary :

Various types of radars have been developed and used until now--such as Pulse, FM-CW, and Spread Spectrum. Additionally, we have proposed another type of radar which measures distances by using standing wave. We have named it as "Standing Wave Radar." It has a shorter minimum detectable range and higher accuracy compared to other types. However, the radar can not measure distances down to zero meters like other types of radars. Minimum detectable range of the standing wave radar depends on a usable frequency range. A wider frequency range is required if we need to measure shorter distances. Consequently, we propose a new method for measuring distances down to zero meters without expanding the frequency range. We use an analytic signal, which is a complex sinusoidal signal. The signal is obtained by observing the standing wave with multiple detectors. We calculate distances by Fourier transform of the analytic signal. Moreover, we verify the validity of our method by simulations based on numerical calculation. The results show that it is possible to measure distances down to zero meters. In our method, measurement errors are caused by deviations of position and gain of the detectors. They are around 10cm at the largest if the gain deviations are up to 1% and the position deviations are up to 6% of the spacing between the detectors. Prevalent radars still have a common defect that they can not measure distances from zero to several meters. We expect that the defect will be eliminated by putting our method into practical use.

• Publication: IEICE TRANSACTIONS on Communications Vol.E88-B No.6 pp.2609-2615
• Publication Date: 2005/06/01
• DOI: 10.1093/ietcom/e88-b.6.2609
• Type of Manuscript: PAPER
• Category: Sensing

Authors

Tetsuji UEBO
Yoshihiro OKUBO
Tadamitsu IRITANI

Keyword

standing wave,  radar,  minimum detectable range,  zero