IEICE TRANSACTIONS on Communications
Beam Scanning Comb-Line Antenna Loading Movable Dielectric Plate
Summary :
This paper describes a beam scanning antenna that consists of a movable dielectric plate loaded onto a microstrip comb-line antenna. This type of antenna uses a mechanical system and so offers a simple structure and low cost. The main beam direction of the proposed antenna is changed by moving the dielectric plate. The guide wavelength of the microstrip line was measured at the quasi-millimeter wave band (20 GHz) when moving the dielectric plate to investigate the possibility of beam scanning. The proposed antenna was fabricated to experimentally demonstrate its principle operation. A possible beam scanning angle of 20 degrees was confirmed.
- Publication
- IEICE TRANSACTIONS on Communications Vol.E90-B No.9 pp.2213-2218
- Publication Date
- 2007/09/01
- Publicized
- Online ISSN
- 1745-1345
- DOI
- 10.1093/ietcom/e90-b.9.2213
- Type of Manuscript
- Special Section PAPER (Special Section on 2006 International Symposium on Antennas and Propagation)
- Category
- Antennas
Authors
Keyword
Latest Issue
Copyrights notice of machine-translated contents
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Cite this
Copy
Kazuhiro KITATANI, Takahiko TERADA, Yasuyuki OKAMURA, "Beam Scanning Comb-Line Antenna Loading Movable Dielectric Plate" in IEICE TRANSACTIONS on Communications,
vol. E90-B, no. 9, pp. 2213-2218, September 2007, doi: 10.1093/ietcom/e90-b.9.2213.
Abstract: This paper describes a beam scanning antenna that consists of a movable dielectric plate loaded onto a microstrip comb-line antenna. This type of antenna uses a mechanical system and so offers a simple structure and low cost. The main beam direction of the proposed antenna is changed by moving the dielectric plate. The guide wavelength of the microstrip line was measured at the quasi-millimeter wave band (20 GHz) when moving the dielectric plate to investigate the possibility of beam scanning. The proposed antenna was fabricated to experimentally demonstrate its principle operation. A possible beam scanning angle of 20 degrees was confirmed.
URL: https://global.ieice.org/en_transactions/communications/10.1093/ietcom/e90-b.9.2213/_p
Copy
@ARTICLE{e90-b_9_2213,
author={Kazuhiro KITATANI, Takahiko TERADA, Yasuyuki OKAMURA, },
journal={IEICE TRANSACTIONS on Communications},
title={Beam Scanning Comb-Line Antenna Loading Movable Dielectric Plate},
year={2007},
volume={E90-B},
number={9},
pages={2213-2218},
abstract={This paper describes a beam scanning antenna that consists of a movable dielectric plate loaded onto a microstrip comb-line antenna. This type of antenna uses a mechanical system and so offers a simple structure and low cost. The main beam direction of the proposed antenna is changed by moving the dielectric plate. The guide wavelength of the microstrip line was measured at the quasi-millimeter wave band (20 GHz) when moving the dielectric plate to investigate the possibility of beam scanning. The proposed antenna was fabricated to experimentally demonstrate its principle operation. A possible beam scanning angle of 20 degrees was confirmed.},
keywords={},
doi={10.1093/ietcom/e90-b.9.2213},
ISSN={1745-1345},
month={September},}
Copy
TY - JOUR
TI - Beam Scanning Comb-Line Antenna Loading Movable Dielectric Plate
T2 - IEICE TRANSACTIONS on Communications
SP - 2213
EP - 2218
AU - Kazuhiro KITATANI
AU - Takahiko TERADA
AU - Yasuyuki OKAMURA
PY - 2007
DO - 10.1093/ietcom/e90-b.9.2213
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E90-B
IS - 9
JA - IEICE TRANSACTIONS on Communications
Y1 - September 2007
AB - This paper describes a beam scanning antenna that consists of a movable dielectric plate loaded onto a microstrip comb-line antenna. This type of antenna uses a mechanical system and so offers a simple structure and low cost. The main beam direction of the proposed antenna is changed by moving the dielectric plate. The guide wavelength of the microstrip line was measured at the quasi-millimeter wave band (20 GHz) when moving the dielectric plate to investigate the possibility of beam scanning. The proposed antenna was fabricated to experimentally demonstrate its principle operation. A possible beam scanning angle of 20 degrees was confirmed.
ER -
English
