Design Method for Highly Reliable Virtual Path Based ATM Networks

Byung Han RYU; Masayuki MURATA; Hideo MIYAHARA

Design Method for Highly Reliable Virtual Path Based ATM Networks

Byung Han RYU, Masayuki MURATA, Hideo MIYAHARA

Full Text Views

0

Cite this

Summary :

In this paper, we propose a new design method to construct the highly reliable ATM network based on the virtual path (VP) concept. Through our method, we can guarantee a network survivability, by which we mean that connectivity between every pair of two end nodes is assured even after the failure, and that quality of service (QoS) requirements of each VC connection are still satisfied. For achieving a reliable network, every VP connection between two end nodes is equipped with a secondary VP connection such that routes of primary and secondary VPs are established on completely disjoint physical paths. Our primary objective of the current paper is that the construction cost of the VP-based network with such a survivability is minimized while the QoS requirement of traffic sources in fulfilled. For this purpose, after all the routes of VPs are temporarily established by means of the shortest paths, we try to minimize the network cost through (1) the alternation of VP route and (2) the separation of a single VP into several VPs, and optionally through (3) the introduction of VCX nodes. Through numerical examples, we show how the increased cost for the reliable network can be sustained by using our design method.

Publication: IEICE TRANSACTIONS on Communications Vol.E79-B No.10 pp.1500-1514

Publication Date: 1996/10/25

Publicized

Online ISSN

DOI

Type of Manuscript: PAPER

Category: Communication Networks and Services

Cite this

Copy

Byung Han RYU, Masayuki MURATA, Hideo MIYAHARA, "Design Method for Highly Reliable Virtual Path Based ATM Networks" in IEICE TRANSACTIONS on Communications, vol. E79-B, no. 10, pp. 1500-1514, October 1996, doi: .
Abstract: In this paper, we propose a new design method to construct the highly reliable ATM network based on the virtual path (VP) concept. Through our method, we can guarantee a network survivability, by which we mean that connectivity between every pair of two end nodes is assured even after the failure, and that quality of service (QoS) requirements of each VC connection are still satisfied. For achieving a reliable network, every VP connection between two end nodes is equipped with a secondary VP connection such that routes of primary and secondary VPs are established on completely disjoint physical paths. Our primary objective of the current paper is that the construction cost of the VP-based network with such a survivability is minimized while the QoS requirement of traffic sources in fulfilled. For this purpose, after all the routes of VPs are temporarily established by means of the shortest paths, we try to minimize the network cost through (1) the alternation of VP route and (2) the separation of a single VP into several VPs, and optionally through (3) the introduction of VCX nodes. Through numerical examples, we show how the increased cost for the reliable network can be sustained by using our design method.
URL: https://global.ieice.org/en_transactions/communications/10.1587/e79-b_10_1500/_p

Copy

@ARTICLE{e79-b_10_1500,
author={Byung Han RYU, Masayuki MURATA, Hideo MIYAHARA, },
journal={IEICE TRANSACTIONS on Communications},
title={Design Method for Highly Reliable Virtual Path Based ATM Networks},
year={1996},
volume={E79-B},
number={10},
pages={1500-1514},
abstract={In this paper, we propose a new design method to construct the highly reliable ATM network based on the virtual path (VP) concept. Through our method, we can guarantee a network survivability, by which we mean that connectivity between every pair of two end nodes is assured even after the failure, and that quality of service (QoS) requirements of each VC connection are still satisfied. For achieving a reliable network, every VP connection between two end nodes is equipped with a secondary VP connection such that routes of primary and secondary VPs are established on completely disjoint physical paths. Our primary objective of the current paper is that the construction cost of the VP-based network with such a survivability is minimized while the QoS requirement of traffic sources in fulfilled. For this purpose, after all the routes of VPs are temporarily established by means of the shortest paths, we try to minimize the network cost through (1) the alternation of VP route and (2) the separation of a single VP into several VPs, and optionally through (3) the introduction of VCX nodes. Through numerical examples, we show how the increased cost for the reliable network can be sustained by using our design method.},
keywords={},
doi={},
ISSN={},
month={October},}

Copy

TY - JOUR
TI - Design Method for Highly Reliable Virtual Path Based ATM Networks
T2 - IEICE TRANSACTIONS on Communications
SP - 1500
EP - 1514
AU - Byung Han RYU
AU - Masayuki MURATA
AU - Hideo MIYAHARA
PY - 1996
DO -
JO - IEICE TRANSACTIONS on Communications
SN -
VL - E79-B
IS - 10
JA - IEICE TRANSACTIONS on Communications
Y1 - October 1996
AB - In this paper, we propose a new design method to construct the highly reliable ATM network based on the virtual path (VP) concept. Through our method, we can guarantee a network survivability, by which we mean that connectivity between every pair of two end nodes is assured even after the failure, and that quality of service (QoS) requirements of each VC connection are still satisfied. For achieving a reliable network, every VP connection between two end nodes is equipped with a secondary VP connection such that routes of primary and secondary VPs are established on completely disjoint physical paths. Our primary objective of the current paper is that the construction cost of the VP-based network with such a survivability is minimized while the QoS requirement of traffic sources in fulfilled. For this purpose, after all the routes of VPs are temporarily established by means of the shortest paths, we try to minimize the network cost through (1) the alternation of VP route and (2) the separation of a single VP into several VPs, and optionally through (3) the introduction of VCX nodes. Through numerical examples, we show how the increased cost for the reliable network can be sustained by using our design method.
ER -