Multi-Code CDMA (MC-CDMA) can not only be integrated easily with a conventional CDMA system, but also achieve good spectral efficiency and high processing gain. MC-CDMA requires a linear amplifier due to the increasing value of its peak-to-average power ratio (PAPR) as the number of codes increases. As such, a multi-phased MC-CDMA (MP-CDMA) system is proposed to provide a variable rate service that is not susceptible to the nonlinear characteristics of an amplifier. A clipping technique is used between the output of a multi-code modulator and the input of an MPSK modulator to improve the performance of the MPSK chip demodulator and reduce the system's complexity. System performance is analyzed and compared with the number of codes and clipping levels. The optimum clipping level is also evaluated for the number of codes on both AWGN and flat fading channels.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copy
Cheol Yong AHN, Dong Ku KIM, "Performance Analysis of Multi Phased MC-CDMA System in Cooperating with Clipping" in IEICE TRANSACTIONS on Communications,
vol. E86-B, no. 11, pp. 3326-3330, November 2003, doi: .
Abstract: Multi-Code CDMA (MC-CDMA) can not only be integrated easily with a conventional CDMA system, but also achieve good spectral efficiency and high processing gain. MC-CDMA requires a linear amplifier due to the increasing value of its peak-to-average power ratio (PAPR) as the number of codes increases. As such, a multi-phased MC-CDMA (MP-CDMA) system is proposed to provide a variable rate service that is not susceptible to the nonlinear characteristics of an amplifier. A clipping technique is used between the output of a multi-code modulator and the input of an MPSK modulator to improve the performance of the MPSK chip demodulator and reduce the system's complexity. System performance is analyzed and compared with the number of codes and clipping levels. The optimum clipping level is also evaluated for the number of codes on both AWGN and flat fading channels.
URL: https://global.ieice.org/en_transactions/communications/10.1587/e86-b_11_3326/_p
Copy
@ARTICLE{e86-b_11_3326,
author={Cheol Yong AHN, Dong Ku KIM, },
journal={IEICE TRANSACTIONS on Communications},
title={Performance Analysis of Multi Phased MC-CDMA System in Cooperating with Clipping},
year={2003},
volume={E86-B},
number={11},
pages={3326-3330},
abstract={Multi-Code CDMA (MC-CDMA) can not only be integrated easily with a conventional CDMA system, but also achieve good spectral efficiency and high processing gain. MC-CDMA requires a linear amplifier due to the increasing value of its peak-to-average power ratio (PAPR) as the number of codes increases. As such, a multi-phased MC-CDMA (MP-CDMA) system is proposed to provide a variable rate service that is not susceptible to the nonlinear characteristics of an amplifier. A clipping technique is used between the output of a multi-code modulator and the input of an MPSK modulator to improve the performance of the MPSK chip demodulator and reduce the system's complexity. System performance is analyzed and compared with the number of codes and clipping levels. The optimum clipping level is also evaluated for the number of codes on both AWGN and flat fading channels.},
keywords={},
doi={},
ISSN={},
month={November},}
Copy
TY - JOUR
TI - Performance Analysis of Multi Phased MC-CDMA System in Cooperating with Clipping
T2 - IEICE TRANSACTIONS on Communications
SP - 3326
EP - 3330
AU - Cheol Yong AHN
AU - Dong Ku KIM
PY - 2003
DO -
JO - IEICE TRANSACTIONS on Communications
SN -
VL - E86-B
IS - 11
JA - IEICE TRANSACTIONS on Communications
Y1 - November 2003
AB - Multi-Code CDMA (MC-CDMA) can not only be integrated easily with a conventional CDMA system, but also achieve good spectral efficiency and high processing gain. MC-CDMA requires a linear amplifier due to the increasing value of its peak-to-average power ratio (PAPR) as the number of codes increases. As such, a multi-phased MC-CDMA (MP-CDMA) system is proposed to provide a variable rate service that is not susceptible to the nonlinear characteristics of an amplifier. A clipping technique is used between the output of a multi-code modulator and the input of an MPSK modulator to improve the performance of the MPSK chip demodulator and reduce the system's complexity. System performance is analyzed and compared with the number of codes and clipping levels. The optimum clipping level is also evaluated for the number of codes on both AWGN and flat fading channels.
ER -