The effect of DC offset on multi-input multi-output (MIMO) direct transceivers with adaptive modulation (AM) is discussed in this paper. A variable-rate variable-power (VRVP) AM system with perfect channel state information (P-CSI) at both the transmitter and receiver in a MIMO scenario is considered. The DC offset is modeled as a zero mean complex Gaussian distributed random variable. By this modeling of the DC offset, the analytical expression for degraded bit error rate (BER) is derived. To derive this analytical expression, we establish a reasonable approximation. The good agreement between the analytical and simulation results shows that the approximation is valid and confirms the accuracy of the analytical expressions. Moreover, an approach to improve the degraded BER in these systems is introduced. For this purpose, we introduce a design for AM MIMO systems that takes account of DC offset and its effectiveness is confirmed. Throughput analysis for the AM MIMO system in the presence of DC offset is presented in this paper too. An analytical expression for throughput is derived and approximated to a simpler equation. At last, throughput results are compared to the simulation outcomes.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copy
Mohammadreza KESHAVARZI, Abbas MOHAMMADI, Abdolali ABDIPOUR, Fadhel M. GHANNOUCHI, "Characterization of DC Offset on Adaptive MIMO Direct Conversion Transceivers" in IEICE TRANSACTIONS on Communications,
vol. E94-B, no. 1, pp. 253-261, January 2011, doi: 10.1587/transcom.E94.B.253.
Abstract: The effect of DC offset on multi-input multi-output (MIMO) direct transceivers with adaptive modulation (AM) is discussed in this paper. A variable-rate variable-power (VRVP) AM system with perfect channel state information (P-CSI) at both the transmitter and receiver in a MIMO scenario is considered. The DC offset is modeled as a zero mean complex Gaussian distributed random variable. By this modeling of the DC offset, the analytical expression for degraded bit error rate (BER) is derived. To derive this analytical expression, we establish a reasonable approximation. The good agreement between the analytical and simulation results shows that the approximation is valid and confirms the accuracy of the analytical expressions. Moreover, an approach to improve the degraded BER in these systems is introduced. For this purpose, we introduce a design for AM MIMO systems that takes account of DC offset and its effectiveness is confirmed. Throughput analysis for the AM MIMO system in the presence of DC offset is presented in this paper too. An analytical expression for throughput is derived and approximated to a simpler equation. At last, throughput results are compared to the simulation outcomes.
URL: https://global.ieice.org/en_transactions/communications/10.1587/transcom.E94.B.253/_p
Copy
@ARTICLE{e94-b_1_253,
author={Mohammadreza KESHAVARZI, Abbas MOHAMMADI, Abdolali ABDIPOUR, Fadhel M. GHANNOUCHI, },
journal={IEICE TRANSACTIONS on Communications},
title={Characterization of DC Offset on Adaptive MIMO Direct Conversion Transceivers},
year={2011},
volume={E94-B},
number={1},
pages={253-261},
abstract={The effect of DC offset on multi-input multi-output (MIMO) direct transceivers with adaptive modulation (AM) is discussed in this paper. A variable-rate variable-power (VRVP) AM system with perfect channel state information (P-CSI) at both the transmitter and receiver in a MIMO scenario is considered. The DC offset is modeled as a zero mean complex Gaussian distributed random variable. By this modeling of the DC offset, the analytical expression for degraded bit error rate (BER) is derived. To derive this analytical expression, we establish a reasonable approximation. The good agreement between the analytical and simulation results shows that the approximation is valid and confirms the accuracy of the analytical expressions. Moreover, an approach to improve the degraded BER in these systems is introduced. For this purpose, we introduce a design for AM MIMO systems that takes account of DC offset and its effectiveness is confirmed. Throughput analysis for the AM MIMO system in the presence of DC offset is presented in this paper too. An analytical expression for throughput is derived and approximated to a simpler equation. At last, throughput results are compared to the simulation outcomes.},
keywords={},
doi={10.1587/transcom.E94.B.253},
ISSN={1745-1345},
month={January},}
Copy
TY - JOUR
TI - Characterization of DC Offset on Adaptive MIMO Direct Conversion Transceivers
T2 - IEICE TRANSACTIONS on Communications
SP - 253
EP - 261
AU - Mohammadreza KESHAVARZI
AU - Abbas MOHAMMADI
AU - Abdolali ABDIPOUR
AU - Fadhel M. GHANNOUCHI
PY - 2011
DO - 10.1587/transcom.E94.B.253
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E94-B
IS - 1
JA - IEICE TRANSACTIONS on Communications
Y1 - January 2011
AB - The effect of DC offset on multi-input multi-output (MIMO) direct transceivers with adaptive modulation (AM) is discussed in this paper. A variable-rate variable-power (VRVP) AM system with perfect channel state information (P-CSI) at both the transmitter and receiver in a MIMO scenario is considered. The DC offset is modeled as a zero mean complex Gaussian distributed random variable. By this modeling of the DC offset, the analytical expression for degraded bit error rate (BER) is derived. To derive this analytical expression, we establish a reasonable approximation. The good agreement between the analytical and simulation results shows that the approximation is valid and confirms the accuracy of the analytical expressions. Moreover, an approach to improve the degraded BER in these systems is introduced. For this purpose, we introduce a design for AM MIMO systems that takes account of DC offset and its effectiveness is confirmed. Throughput analysis for the AM MIMO system in the presence of DC offset is presented in this paper too. An analytical expression for throughput is derived and approximated to a simpler equation. At last, throughput results are compared to the simulation outcomes.
ER -