Radio over Fiber (RoF) is a promising technology that is suitable for broadband wireless access systems to cover in-building areas and outdoor dead-spots. However, one issue in RoF transmission that should be considered is the nonlinear distortion caused by Electrical/Optical (E/O) converters. Multicarrier RF (Radio Frequency) signal formats such as Orthogonal Frequency Division Multiplexing (OFDM), which are commonly employed in broadband wireless communications, are weak against nonlinearities. To enable the linear transmission of OFDM signal in RoF channel, we propose to employ the Envelop Pulse Width Modulation (EPWM) transmission scheme for RoF channel. Two commonly used E/O converters, Mach-Zehnder modulator and direct-modulation of Distributed Feedback Laser Diode (DFB LD), are employed to validate the proposal. Based on the measured nonlinearities of the E/O converters, they are mathematically modeled and their transmission performance are analyzed. A modified Rapp model is developed for the modeling of the DFB LD. Through simulations and experiments, the proposed scheme is shown to be effective in dealing with the nonlinearities of the E/O converters.
Xiaoxue YU
The University of Electro-Communications
Yasushi YAMAO
The University of Electro-Communications
Motoharu MATSUURA
The University of Electro-Communications
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copy
Xiaoxue YU, Yasushi YAMAO, Motoharu MATSUURA, "EPWM-OFDM Signal Transmission against Nonlinearities of E/O Converters in Radio over Fiber Channel" in IEICE TRANSACTIONS on Communications,
vol. E97-B, no. 2, pp. 484-494, February 2014, doi: 10.1587/transcom.E97.B.484.
Abstract: Radio over Fiber (RoF) is a promising technology that is suitable for broadband wireless access systems to cover in-building areas and outdoor dead-spots. However, one issue in RoF transmission that should be considered is the nonlinear distortion caused by Electrical/Optical (E/O) converters. Multicarrier RF (Radio Frequency) signal formats such as Orthogonal Frequency Division Multiplexing (OFDM), which are commonly employed in broadband wireless communications, are weak against nonlinearities. To enable the linear transmission of OFDM signal in RoF channel, we propose to employ the Envelop Pulse Width Modulation (EPWM) transmission scheme for RoF channel. Two commonly used E/O converters, Mach-Zehnder modulator and direct-modulation of Distributed Feedback Laser Diode (DFB LD), are employed to validate the proposal. Based on the measured nonlinearities of the E/O converters, they are mathematically modeled and their transmission performance are analyzed. A modified Rapp model is developed for the modeling of the DFB LD. Through simulations and experiments, the proposed scheme is shown to be effective in dealing with the nonlinearities of the E/O converters.
URL: https://global.ieice.org/en_transactions/communications/10.1587/transcom.E97.B.484/_p
Copy
@ARTICLE{e97-b_2_484,
author={Xiaoxue YU, Yasushi YAMAO, Motoharu MATSUURA, },
journal={IEICE TRANSACTIONS on Communications},
title={EPWM-OFDM Signal Transmission against Nonlinearities of E/O Converters in Radio over Fiber Channel},
year={2014},
volume={E97-B},
number={2},
pages={484-494},
abstract={Radio over Fiber (RoF) is a promising technology that is suitable for broadband wireless access systems to cover in-building areas and outdoor dead-spots. However, one issue in RoF transmission that should be considered is the nonlinear distortion caused by Electrical/Optical (E/O) converters. Multicarrier RF (Radio Frequency) signal formats such as Orthogonal Frequency Division Multiplexing (OFDM), which are commonly employed in broadband wireless communications, are weak against nonlinearities. To enable the linear transmission of OFDM signal in RoF channel, we propose to employ the Envelop Pulse Width Modulation (EPWM) transmission scheme for RoF channel. Two commonly used E/O converters, Mach-Zehnder modulator and direct-modulation of Distributed Feedback Laser Diode (DFB LD), are employed to validate the proposal. Based on the measured nonlinearities of the E/O converters, they are mathematically modeled and their transmission performance are analyzed. A modified Rapp model is developed for the modeling of the DFB LD. Through simulations and experiments, the proposed scheme is shown to be effective in dealing with the nonlinearities of the E/O converters.},
keywords={},
doi={10.1587/transcom.E97.B.484},
ISSN={1745-1345},
month={February},}
Copy
TY - JOUR
TI - EPWM-OFDM Signal Transmission against Nonlinearities of E/O Converters in Radio over Fiber Channel
T2 - IEICE TRANSACTIONS on Communications
SP - 484
EP - 494
AU - Xiaoxue YU
AU - Yasushi YAMAO
AU - Motoharu MATSUURA
PY - 2014
DO - 10.1587/transcom.E97.B.484
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E97-B
IS - 2
JA - IEICE TRANSACTIONS on Communications
Y1 - February 2014
AB - Radio over Fiber (RoF) is a promising technology that is suitable for broadband wireless access systems to cover in-building areas and outdoor dead-spots. However, one issue in RoF transmission that should be considered is the nonlinear distortion caused by Electrical/Optical (E/O) converters. Multicarrier RF (Radio Frequency) signal formats such as Orthogonal Frequency Division Multiplexing (OFDM), which are commonly employed in broadband wireless communications, are weak against nonlinearities. To enable the linear transmission of OFDM signal in RoF channel, we propose to employ the Envelop Pulse Width Modulation (EPWM) transmission scheme for RoF channel. Two commonly used E/O converters, Mach-Zehnder modulator and direct-modulation of Distributed Feedback Laser Diode (DFB LD), are employed to validate the proposal. Based on the measured nonlinearities of the E/O converters, they are mathematically modeled and their transmission performance are analyzed. A modified Rapp model is developed for the modeling of the DFB LD. Through simulations and experiments, the proposed scheme is shown to be effective in dealing with the nonlinearities of the E/O converters.
ER -