IEICE TRANSACTIONS on Electronics
Sliding Characteristics of the Sliding Contact of New Type Cu-Sn-Ni Based Composite Materials under High Speed Sliding Conditions
Summary :
The possibility of using three kinds of new type composite materials as material for high speed sliding contacts was investigated. The results of this investigation were compared with the results of the low speed tests that were reported earlier. As a result of the above, it was discovered that for high speed rotation in the range from 0.014 m/s to 2 m/s, the order of merit did not significantly change. Based on this, it was concluded that if solid lubricant is effectively supplied to the sliding surface, the influence by frictional heat generated by high speed is slight. Of the three kinds of composite material, it was clarified that composite material (CMML-1) had the lowest contact resistance and Composite Material (CMML-3) had the lowest maximum frictional coefficient of friction. 'CM' and 'ML' are initialisms for 'Composite Material' and 'Material of Lubrication' respectively. The number that is attached to the material name is a numeric value that was set by this laboratory.
- Publication
- IEICE TRANSACTIONS on Electronics Vol.E90-C No.7 pp.1479-1490
- Publication Date
- 2007/07/01
- Publicized
- Online ISSN
- 1745-1353
- DOI
- 10.1093/ietele/e90-c.7.1479
- Type of Manuscript
- Special Section PAPER (Special Section on Recent Development of Electromechanical Devices (Selected Papers from ICEC2006))
- Category
- Connectors & Sliding Contacts
Authors
Keyword
Latest Issue
Copyrights notice of machine-translated contents
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Cite this
Copy
Yoshitada WATANABE, "Sliding Characteristics of the Sliding Contact of New Type Cu-Sn-Ni Based Composite Materials under High Speed Sliding Conditions" in IEICE TRANSACTIONS on Electronics,
vol. E90-C, no. 7, pp. 1479-1490, July 2007, doi: 10.1093/ietele/e90-c.7.1479.
Abstract: The possibility of using three kinds of new type composite materials as material for high speed sliding contacts was investigated. The results of this investigation were compared with the results of the low speed tests that were reported earlier. As a result of the above, it was discovered that for high speed rotation in the range from 0.014 m/s to 2 m/s, the order of merit did not significantly change. Based on this, it was concluded that if solid lubricant is effectively supplied to the sliding surface, the influence by frictional heat generated by high speed is slight. Of the three kinds of composite material, it was clarified that composite material (CMML-1) had the lowest contact resistance and Composite Material (CMML-3) had the lowest maximum frictional coefficient of friction. 'CM' and 'ML' are initialisms for 'Composite Material' and 'Material of Lubrication' respectively. The number that is attached to the material name is a numeric value that was set by this laboratory.
URL: https://global.ieice.org/en_transactions/electronics/10.1093/ietele/e90-c.7.1479/_p
Copy
@ARTICLE{e90-c_7_1479,
author={Yoshitada WATANABE, },
journal={IEICE TRANSACTIONS on Electronics},
title={Sliding Characteristics of the Sliding Contact of New Type Cu-Sn-Ni Based Composite Materials under High Speed Sliding Conditions},
year={2007},
volume={E90-C},
number={7},
pages={1479-1490},
abstract={The possibility of using three kinds of new type composite materials as material for high speed sliding contacts was investigated. The results of this investigation were compared with the results of the low speed tests that were reported earlier. As a result of the above, it was discovered that for high speed rotation in the range from 0.014 m/s to 2 m/s, the order of merit did not significantly change. Based on this, it was concluded that if solid lubricant is effectively supplied to the sliding surface, the influence by frictional heat generated by high speed is slight. Of the three kinds of composite material, it was clarified that composite material (CMML-1) had the lowest contact resistance and Composite Material (CMML-3) had the lowest maximum frictional coefficient of friction. 'CM' and 'ML' are initialisms for 'Composite Material' and 'Material of Lubrication' respectively. The number that is attached to the material name is a numeric value that was set by this laboratory.},
keywords={},
doi={10.1093/ietele/e90-c.7.1479},
ISSN={1745-1353},
month={July},}
Copy
TY - JOUR
TI - Sliding Characteristics of the Sliding Contact of New Type Cu-Sn-Ni Based Composite Materials under High Speed Sliding Conditions
T2 - IEICE TRANSACTIONS on Electronics
SP - 1479
EP - 1490
AU - Yoshitada WATANABE
PY - 2007
DO - 10.1093/ietele/e90-c.7.1479
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E90-C
IS - 7
JA - IEICE TRANSACTIONS on Electronics
Y1 - July 2007
AB - The possibility of using three kinds of new type composite materials as material for high speed sliding contacts was investigated. The results of this investigation were compared with the results of the low speed tests that were reported earlier. As a result of the above, it was discovered that for high speed rotation in the range from 0.014 m/s to 2 m/s, the order of merit did not significantly change. Based on this, it was concluded that if solid lubricant is effectively supplied to the sliding surface, the influence by frictional heat generated by high speed is slight. Of the three kinds of composite material, it was clarified that composite material (CMML-1) had the lowest contact resistance and Composite Material (CMML-3) had the lowest maximum frictional coefficient of friction. 'CM' and 'ML' are initialisms for 'Composite Material' and 'Material of Lubrication' respectively. The number that is attached to the material name is a numeric value that was set by this laboratory.
ER -
English
