The FePt films were fabricated by using RF sputtering for magnetic recording media. The efforts have been done to reduce the grain size, to decrease the ordering temperature, and to control the crystalline orientation. It was found that the proper amount of alumina led to decrease the grain size and weak the interparticle exchange coupling. 15% N2 partial pressure can reduce the transform temperature from fcc to fct phase. In order to control the texture in the FePt films, two kinds of methods were used. On the one hand, the addition of W in Cr underlayer and the usage of Mo and Pt as intermediate layer caused the texture of FePt films changed from (200) to (001). On the other hand, the (Pt/Fe)n multilayers were fabricated to produce the FePt (001) orientation.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copy
Fulin WEI, Zheng YANG, "Fabrication of FePt Films for Magnetic Recording Media" in IEICE TRANSACTIONS on Electronics,
vol. E90-C, no. 8, pp. 1570-1576, August 2007, doi: 10.1093/ietele/e90-c.8.1570.
Abstract: The FePt films were fabricated by using RF sputtering for magnetic recording media. The efforts have been done to reduce the grain size, to decrease the ordering temperature, and to control the crystalline orientation. It was found that the proper amount of alumina led to decrease the grain size and weak the interparticle exchange coupling. 15% N2 partial pressure can reduce the transform temperature from fcc to fct phase. In order to control the texture in the FePt films, two kinds of methods were used. On the one hand, the addition of W in Cr underlayer and the usage of Mo and Pt as intermediate layer caused the texture of FePt films changed from (200) to (001). On the other hand, the (Pt/Fe)n multilayers were fabricated to produce the FePt (001) orientation.
URL: https://global.ieice.org/en_transactions/electronics/10.1093/ietele/e90-c.8.1570/_p
Copy
@ARTICLE{e90-c_8_1570,
author={Fulin WEI, Zheng YANG, },
journal={IEICE TRANSACTIONS on Electronics},
title={Fabrication of FePt Films for Magnetic Recording Media},
year={2007},
volume={E90-C},
number={8},
pages={1570-1576},
abstract={The FePt films were fabricated by using RF sputtering for magnetic recording media. The efforts have been done to reduce the grain size, to decrease the ordering temperature, and to control the crystalline orientation. It was found that the proper amount of alumina led to decrease the grain size and weak the interparticle exchange coupling. 15% N2 partial pressure can reduce the transform temperature from fcc to fct phase. In order to control the texture in the FePt films, two kinds of methods were used. On the one hand, the addition of W in Cr underlayer and the usage of Mo and Pt as intermediate layer caused the texture of FePt films changed from (200) to (001). On the other hand, the (Pt/Fe)n multilayers were fabricated to produce the FePt (001) orientation.},
keywords={},
doi={10.1093/ietele/e90-c.8.1570},
ISSN={1745-1353},
month={August},}
Copy
TY - JOUR
TI - Fabrication of FePt Films for Magnetic Recording Media
T2 - IEICE TRANSACTIONS on Electronics
SP - 1570
EP - 1576
AU - Fulin WEI
AU - Zheng YANG
PY - 2007
DO - 10.1093/ietele/e90-c.8.1570
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E90-C
IS - 8
JA - IEICE TRANSACTIONS on Electronics
Y1 - August 2007
AB - The FePt films were fabricated by using RF sputtering for magnetic recording media. The efforts have been done to reduce the grain size, to decrease the ordering temperature, and to control the crystalline orientation. It was found that the proper amount of alumina led to decrease the grain size and weak the interparticle exchange coupling. 15% N2 partial pressure can reduce the transform temperature from fcc to fct phase. In order to control the texture in the FePt films, two kinds of methods were used. On the one hand, the addition of W in Cr underlayer and the usage of Mo and Pt as intermediate layer caused the texture of FePt films changed from (200) to (001). On the other hand, the (Pt/Fe)n multilayers were fabricated to produce the FePt (001) orientation.
ER -