Precise designs are presented for sapphire rod resonators of three types, which have been proposed by the IEC/TC90/WG8 in the standard measurement method of the surface resistance Rs of high-Tc superconductor (HTS) films; an open-type, a cavity-type and a closed-type. In order to separate TE011 and TE013 modes, which are used in Rs measurements, from the other modes, appropriate dimensions for these three resonators are determined from mode charts calculated from a rigorous analysis based on the mode matching method, taking account of an uniaxial-anisotropic characteristic of sapphire. Comparison of the open-type resonator with the closed-type is performed. For the open-type, the unloaded Q values of both the TE011 and TE013 modes are reduced by radiations of a leaky state TM310 mode. Finally, validity of the design and a two-sapphire-rod-resonator method will be verified by experiments.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copy
Toru HASHIMOTO, Yoshio KOBAYASHI, "Two-Sapphire-Rod-Resonator Method to Measure the Surface Resistance of High-Tc Superconductor Films" in IEICE TRANSACTIONS on Electronics,
vol. E87-C, no. 5, pp. 681-688, May 2004, doi: .
Abstract: Precise designs are presented for sapphire rod resonators of three types, which have been proposed by the IEC/TC90/WG8 in the standard measurement method of the surface resistance Rs of high-Tc superconductor (HTS) films; an open-type, a cavity-type and a closed-type. In order to separate TE011 and TE013 modes, which are used in Rs measurements, from the other modes, appropriate dimensions for these three resonators are determined from mode charts calculated from a rigorous analysis based on the mode matching method, taking account of an uniaxial-anisotropic characteristic of sapphire. Comparison of the open-type resonator with the closed-type is performed. For the open-type, the unloaded Q values of both the TE011 and TE013 modes are reduced by radiations of a leaky state TM310 mode. Finally, validity of the design and a two-sapphire-rod-resonator method will be verified by experiments.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e87-c_5_681/_p
Copy
@ARTICLE{e87-c_5_681,
author={Toru HASHIMOTO, Yoshio KOBAYASHI, },
journal={IEICE TRANSACTIONS on Electronics},
title={Two-Sapphire-Rod-Resonator Method to Measure the Surface Resistance of High-Tc Superconductor Films},
year={2004},
volume={E87-C},
number={5},
pages={681-688},
abstract={Precise designs are presented for sapphire rod resonators of three types, which have been proposed by the IEC/TC90/WG8 in the standard measurement method of the surface resistance Rs of high-Tc superconductor (HTS) films; an open-type, a cavity-type and a closed-type. In order to separate TE011 and TE013 modes, which are used in Rs measurements, from the other modes, appropriate dimensions for these three resonators are determined from mode charts calculated from a rigorous analysis based on the mode matching method, taking account of an uniaxial-anisotropic characteristic of sapphire. Comparison of the open-type resonator with the closed-type is performed. For the open-type, the unloaded Q values of both the TE011 and TE013 modes are reduced by radiations of a leaky state TM310 mode. Finally, validity of the design and a two-sapphire-rod-resonator method will be verified by experiments.},
keywords={},
doi={},
ISSN={},
month={May},}
Copy
TY - JOUR
TI - Two-Sapphire-Rod-Resonator Method to Measure the Surface Resistance of High-Tc Superconductor Films
T2 - IEICE TRANSACTIONS on Electronics
SP - 681
EP - 688
AU - Toru HASHIMOTO
AU - Yoshio KOBAYASHI
PY - 2004
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E87-C
IS - 5
JA - IEICE TRANSACTIONS on Electronics
Y1 - May 2004
AB - Precise designs are presented for sapphire rod resonators of three types, which have been proposed by the IEC/TC90/WG8 in the standard measurement method of the surface resistance Rs of high-Tc superconductor (HTS) films; an open-type, a cavity-type and a closed-type. In order to separate TE011 and TE013 modes, which are used in Rs measurements, from the other modes, appropriate dimensions for these three resonators are determined from mode charts calculated from a rigorous analysis based on the mode matching method, taking account of an uniaxial-anisotropic characteristic of sapphire. Comparison of the open-type resonator with the closed-type is performed. For the open-type, the unloaded Q values of both the TE011 and TE013 modes are reduced by radiations of a leaky state TM310 mode. Finally, validity of the design and a two-sapphire-rod-resonator method will be verified by experiments.
ER -