The mixer is a crucial circuit block in a WiMax system receiver. The performance of a mixer depends on three specifications: conversion gain, linearity and noise figure. Many mixers have been recently proposed for UWB and wideband systems; however, they either cannot achieve the high conversion gain required for a WiMAX system or they are prone to high power consumption. In this paper, a folded mixer with a high conversion gain is designed for a 2-11GHz WiMAX system and it can achieve a 20MHz IF output signal. From the simulation results, the proposed folded mixer achieves a conversion gain of 18.9 to 21.5dB for the full bandwidth. With a 0.2 to 4.4dBm IIP3, the NF is 13.5 to 17.6dB. The folded mixer is designed using TSMC 0.18µm CMOS technology. The core power consumption of the mixer is 11.8mW.
Zhi-Ming LIN
National Changhua University of Education and Asia University
Po-Yu KUO
National Yunlin University of Science & Technology
Zhong-Cheng SU
National Changhua University of Education and Asia University
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copy
Zhi-Ming LIN, Po-Yu KUO, Zhong-Cheng SU, "Design a Folded Mixer with High Conversion Gain for 2-11GHz WiMAX System" in IEICE TRANSACTIONS on Electronics,
vol. E100-C, no. 2, pp. 204-210, February 2017, doi: 10.1587/transele.E100.C.204.
Abstract: The mixer is a crucial circuit block in a WiMax system receiver. The performance of a mixer depends on three specifications: conversion gain, linearity and noise figure. Many mixers have been recently proposed for UWB and wideband systems; however, they either cannot achieve the high conversion gain required for a WiMAX system or they are prone to high power consumption. In this paper, a folded mixer with a high conversion gain is designed for a 2-11GHz WiMAX system and it can achieve a 20MHz IF output signal. From the simulation results, the proposed folded mixer achieves a conversion gain of 18.9 to 21.5dB for the full bandwidth. With a 0.2 to 4.4dBm IIP3, the NF is 13.5 to 17.6dB. The folded mixer is designed using TSMC 0.18µm CMOS technology. The core power consumption of the mixer is 11.8mW.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/transele.E100.C.204/_p
Copy
@ARTICLE{e100-c_2_204,
author={Zhi-Ming LIN, Po-Yu KUO, Zhong-Cheng SU, },
journal={IEICE TRANSACTIONS on Electronics},
title={Design a Folded Mixer with High Conversion Gain for 2-11GHz WiMAX System},
year={2017},
volume={E100-C},
number={2},
pages={204-210},
abstract={The mixer is a crucial circuit block in a WiMax system receiver. The performance of a mixer depends on three specifications: conversion gain, linearity and noise figure. Many mixers have been recently proposed for UWB and wideband systems; however, they either cannot achieve the high conversion gain required for a WiMAX system or they are prone to high power consumption. In this paper, a folded mixer with a high conversion gain is designed for a 2-11GHz WiMAX system and it can achieve a 20MHz IF output signal. From the simulation results, the proposed folded mixer achieves a conversion gain of 18.9 to 21.5dB for the full bandwidth. With a 0.2 to 4.4dBm IIP3, the NF is 13.5 to 17.6dB. The folded mixer is designed using TSMC 0.18µm CMOS technology. The core power consumption of the mixer is 11.8mW.},
keywords={},
doi={10.1587/transele.E100.C.204},
ISSN={1745-1353},
month={February},}
Copy
TY - JOUR
TI - Design a Folded Mixer with High Conversion Gain for 2-11GHz WiMAX System
T2 - IEICE TRANSACTIONS on Electronics
SP - 204
EP - 210
AU - Zhi-Ming LIN
AU - Po-Yu KUO
AU - Zhong-Cheng SU
PY - 2017
DO - 10.1587/transele.E100.C.204
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E100-C
IS - 2
JA - IEICE TRANSACTIONS on Electronics
Y1 - February 2017
AB - The mixer is a crucial circuit block in a WiMax system receiver. The performance of a mixer depends on three specifications: conversion gain, linearity and noise figure. Many mixers have been recently proposed for UWB and wideband systems; however, they either cannot achieve the high conversion gain required for a WiMAX system or they are prone to high power consumption. In this paper, a folded mixer with a high conversion gain is designed for a 2-11GHz WiMAX system and it can achieve a 20MHz IF output signal. From the simulation results, the proposed folded mixer achieves a conversion gain of 18.9 to 21.5dB for the full bandwidth. With a 0.2 to 4.4dBm IIP3, the NF is 13.5 to 17.6dB. The folded mixer is designed using TSMC 0.18µm CMOS technology. The core power consumption of the mixer is 11.8mW.
ER -