IEICE TRANSACTIONS on Electronics
Arc Erosion of Silver/Tungsten Contact Material under Low Voltage and Small Current and Resistive Load at 400 Hz and 50 Hz
Summary :
Using a self-developed ASTM test system of contact material electrical properties under low voltage (LV), small-capacity, the current-frequency variable and a photoelectric analytical balance, the electric performance comparison experiments and material weighing of silver-based electrical contact materials, such as silver/tungsten and silver/cadmium oxide contact materials, are completed under LV, pure resistive load and small current at 400 Hz/50 Hz. The surface profiles and constituents of silver/tungsten contact material were observed and analyzed by SEM and EDAX. Researches indicate that the form of the contact material arc burnout at 400 Hz is stasis, not an eddy flow style at 50 Hz; meanwhile, the area of the contact burnout at 400 Hz is less than that of 50 Hz, and the local ablation on the surface layer at 400 Hz is more serious. Comparing the capacities of the silver-based contact materials with different second element such as CAgW50, CAgNi10, CAgC4 and CAgCdO15 at 400 Hz, no matter what the performances of arc erosion resistance or welding resistance, it can be found that the capacities of the silver/tungsten material is the best.
- Publication
- IEICE TRANSACTIONS on Electronics Vol.E94-C No.9 pp.1356-1361
- Publication Date
- 2011/09/01
- Publicized
- Online ISSN
- 1745-1353
- DOI
- 10.1587/transele.E94.C.1356
- Type of Manuscript
- Special Section PAPER (Special Section on Recent Development of Electro-Mechanical Devices – Papers selected from International Session on Electro-Mechanical Devices (IS-EMD2010) and other research results –)
- Category
Authors
Keyword
Latest Issue
Copyrights notice of machine-translated contents
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Cite this
Copy
Jing LI, Zhiying MA, Jianming LI, Lizhan XU, "Arc Erosion of Silver/Tungsten Contact Material under Low Voltage and Small Current and Resistive Load at 400 Hz and 50 Hz" in IEICE TRANSACTIONS on Electronics,
vol. E94-C, no. 9, pp. 1356-1361, September 2011, doi: 10.1587/transele.E94.C.1356.
Abstract: Using a self-developed ASTM test system of contact material electrical properties under low voltage (LV), small-capacity, the current-frequency variable and a photoelectric analytical balance, the electric performance comparison experiments and material weighing of silver-based electrical contact materials, such as silver/tungsten and silver/cadmium oxide contact materials, are completed under LV, pure resistive load and small current at 400 Hz/50 Hz. The surface profiles and constituents of silver/tungsten contact material were observed and analyzed by SEM and EDAX. Researches indicate that the form of the contact material arc burnout at 400 Hz is stasis, not an eddy flow style at 50 Hz; meanwhile, the area of the contact burnout at 400 Hz is less than that of 50 Hz, and the local ablation on the surface layer at 400 Hz is more serious. Comparing the capacities of the silver-based contact materials with different second element such as CAgW50, CAgNi10, CAgC4 and CAgCdO15 at 400 Hz, no matter what the performances of arc erosion resistance or welding resistance, it can be found that the capacities of the silver/tungsten material is the best.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/transele.E94.C.1356/_p
Copy
@ARTICLE{e94-c_9_1356,
author={Jing LI, Zhiying MA, Jianming LI, Lizhan XU, },
journal={IEICE TRANSACTIONS on Electronics},
title={Arc Erosion of Silver/Tungsten Contact Material under Low Voltage and Small Current and Resistive Load at 400 Hz and 50 Hz},
year={2011},
volume={E94-C},
number={9},
pages={1356-1361},
abstract={Using a self-developed ASTM test system of contact material electrical properties under low voltage (LV), small-capacity, the current-frequency variable and a photoelectric analytical balance, the electric performance comparison experiments and material weighing of silver-based electrical contact materials, such as silver/tungsten and silver/cadmium oxide contact materials, are completed under LV, pure resistive load and small current at 400 Hz/50 Hz. The surface profiles and constituents of silver/tungsten contact material were observed and analyzed by SEM and EDAX. Researches indicate that the form of the contact material arc burnout at 400 Hz is stasis, not an eddy flow style at 50 Hz; meanwhile, the area of the contact burnout at 400 Hz is less than that of 50 Hz, and the local ablation on the surface layer at 400 Hz is more serious. Comparing the capacities of the silver-based contact materials with different second element such as CAgW50, CAgNi10, CAgC4 and CAgCdO15 at 400 Hz, no matter what the performances of arc erosion resistance or welding resistance, it can be found that the capacities of the silver/tungsten material is the best.},
keywords={},
doi={10.1587/transele.E94.C.1356},
ISSN={1745-1353},
month={September},}
Copy
TY - JOUR
TI - Arc Erosion of Silver/Tungsten Contact Material under Low Voltage and Small Current and Resistive Load at 400 Hz and 50 Hz
T2 - IEICE TRANSACTIONS on Electronics
SP - 1356
EP - 1361
AU - Jing LI
AU - Zhiying MA
AU - Jianming LI
AU - Lizhan XU
PY - 2011
DO - 10.1587/transele.E94.C.1356
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E94-C
IS - 9
JA - IEICE TRANSACTIONS on Electronics
Y1 - September 2011
AB - Using a self-developed ASTM test system of contact material electrical properties under low voltage (LV), small-capacity, the current-frequency variable and a photoelectric analytical balance, the electric performance comparison experiments and material weighing of silver-based electrical contact materials, such as silver/tungsten and silver/cadmium oxide contact materials, are completed under LV, pure resistive load and small current at 400 Hz/50 Hz. The surface profiles and constituents of silver/tungsten contact material were observed and analyzed by SEM and EDAX. Researches indicate that the form of the contact material arc burnout at 400 Hz is stasis, not an eddy flow style at 50 Hz; meanwhile, the area of the contact burnout at 400 Hz is less than that of 50 Hz, and the local ablation on the surface layer at 400 Hz is more serious. Comparing the capacities of the silver-based contact materials with different second element such as CAgW50, CAgNi10, CAgC4 and CAgCdO15 at 400 Hz, no matter what the performances of arc erosion resistance or welding resistance, it can be found that the capacities of the silver/tungsten material is the best.
ER -
English
