IEICE TRANSACTIONS on Fundamentals
Automatic Multi-Stage Clock Gating Optimization Using ILP Formulation
Summary :
Clock gating is supported by commercial tools as a power optimization feature based on the guard signal described in HDL (structural method). However, the identification of control signals for gated registers is hard and designer-intensive work. Besides, since the clock gating cells also consume power, it is imperative to minimize the number of inserted clock gating cells and their switching activities for power optimization. In this paper, we propose an automatic multi-stage clock gating algorithm with ILP (Integer Linear Programming) formulation, including clock gating control candidate extraction, constraints construction and optimum control signal selection. By multi-stage clock gating, unnecessary clock pulses to clock gating cells can be avoided by other clock gating cells, so that the switching activity of clock gating cells can be reduced. We find that any multi-stage control signals are also single-stage control signals, and any combination of signals can be selected from single-stage candidates. The proposed method can be applied to 3 or more cascaded stages. The multi-stage clock gating optimization problem is formulated as constraints in LP format for the selection of cascaded clock-gating order of multi-stage candidate combinations, and a commercial ILP solver (IBM CPLEX) is applied to obtain the control signals for each register with minimum switching activity. Those signals are used to generate a gate level description with guarded registers from original design, and a commercial synthesis and layout tools are applied to obtain the circuit with multi-stage clock gating. For a set of benchmark circuits and a Low Density Parity Check (LDPC) Decoder (6.6k gates, 212 F.F.s), the proposed method is applied and actual power consumption is estimated using Synopsys NanoSim after layout. On average, 31% actual power reduction has been obtained compared with original designs with structural clock gating, and more than 10% improvement has been achieved for some circuits compared with single-stage optimization method. CPU time for optimum multi-stage control selection is several seconds for up to 25k variables in LP format. By applying the proposed clock gating, area can also be reduced since the multiplexors controlling register inputs are eliminated.
- Publication
- IEICE TRANSACTIONS on Fundamentals Vol.E95-A No.8 pp.1347-1358
- Publication Date
- 2012/08/01
- Publicized
- Online ISSN
- 1745-1337
- DOI
- 10.1587/transfun.E95.A.1347
- Type of Manuscript
- PAPER
- Category
- VLSI Design Technology and CAD
Authors
Keyword
Latest Issue
Copyrights notice of machine-translated contents
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Cite this
Copy
Xin MAN, Takashi HORIYAMA, Shinji KIMURA, "Automatic Multi-Stage Clock Gating Optimization Using ILP Formulation" in IEICE TRANSACTIONS on Fundamentals,
vol. E95-A, no. 8, pp. 1347-1358, August 2012, doi: 10.1587/transfun.E95.A.1347.
Abstract: Clock gating is supported by commercial tools as a power optimization feature based on the guard signal described in HDL (structural method). However, the identification of control signals for gated registers is hard and designer-intensive work. Besides, since the clock gating cells also consume power, it is imperative to minimize the number of inserted clock gating cells and their switching activities for power optimization. In this paper, we propose an automatic multi-stage clock gating algorithm with ILP (Integer Linear Programming) formulation, including clock gating control candidate extraction, constraints construction and optimum control signal selection. By multi-stage clock gating, unnecessary clock pulses to clock gating cells can be avoided by other clock gating cells, so that the switching activity of clock gating cells can be reduced. We find that any multi-stage control signals are also single-stage control signals, and any combination of signals can be selected from single-stage candidates. The proposed method can be applied to 3 or more cascaded stages. The multi-stage clock gating optimization problem is formulated as constraints in LP format for the selection of cascaded clock-gating order of multi-stage candidate combinations, and a commercial ILP solver (IBM CPLEX) is applied to obtain the control signals for each register with minimum switching activity. Those signals are used to generate a gate level description with guarded registers from original design, and a commercial synthesis and layout tools are applied to obtain the circuit with multi-stage clock gating. For a set of benchmark circuits and a Low Density Parity Check (LDPC) Decoder (6.6k gates, 212 F.F.s), the proposed method is applied and actual power consumption is estimated using Synopsys NanoSim after layout. On average, 31% actual power reduction has been obtained compared with original designs with structural clock gating, and more than 10% improvement has been achieved for some circuits compared with single-stage optimization method. CPU time for optimum multi-stage control selection is several seconds for up to 25k variables in LP format. By applying the proposed clock gating, area can also be reduced since the multiplexors controlling register inputs are eliminated.
URL: https://global.ieice.org/en_transactions/fundamentals/10.1587/transfun.E95.A.1347/_p
Copy
@ARTICLE{e95-a_8_1347,
author={Xin MAN, Takashi HORIYAMA, Shinji KIMURA, },
journal={IEICE TRANSACTIONS on Fundamentals},
title={Automatic Multi-Stage Clock Gating Optimization Using ILP Formulation},
year={2012},
volume={E95-A},
number={8},
pages={1347-1358},
abstract={Clock gating is supported by commercial tools as a power optimization feature based on the guard signal described in HDL (structural method). However, the identification of control signals for gated registers is hard and designer-intensive work. Besides, since the clock gating cells also consume power, it is imperative to minimize the number of inserted clock gating cells and their switching activities for power optimization. In this paper, we propose an automatic multi-stage clock gating algorithm with ILP (Integer Linear Programming) formulation, including clock gating control candidate extraction, constraints construction and optimum control signal selection. By multi-stage clock gating, unnecessary clock pulses to clock gating cells can be avoided by other clock gating cells, so that the switching activity of clock gating cells can be reduced. We find that any multi-stage control signals are also single-stage control signals, and any combination of signals can be selected from single-stage candidates. The proposed method can be applied to 3 or more cascaded stages. The multi-stage clock gating optimization problem is formulated as constraints in LP format for the selection of cascaded clock-gating order of multi-stage candidate combinations, and a commercial ILP solver (IBM CPLEX) is applied to obtain the control signals for each register with minimum switching activity. Those signals are used to generate a gate level description with guarded registers from original design, and a commercial synthesis and layout tools are applied to obtain the circuit with multi-stage clock gating. For a set of benchmark circuits and a Low Density Parity Check (LDPC) Decoder (6.6k gates, 212 F.F.s), the proposed method is applied and actual power consumption is estimated using Synopsys NanoSim after layout. On average, 31% actual power reduction has been obtained compared with original designs with structural clock gating, and more than 10% improvement has been achieved for some circuits compared with single-stage optimization method. CPU time for optimum multi-stage control selection is several seconds for up to 25k variables in LP format. By applying the proposed clock gating, area can also be reduced since the multiplexors controlling register inputs are eliminated.},
keywords={},
doi={10.1587/transfun.E95.A.1347},
ISSN={1745-1337},
month={August},}
Copy
TY - JOUR
TI - Automatic Multi-Stage Clock Gating Optimization Using ILP Formulation
T2 - IEICE TRANSACTIONS on Fundamentals
SP - 1347
EP - 1358
AU - Xin MAN
AU - Takashi HORIYAMA
AU - Shinji KIMURA
PY - 2012
DO - 10.1587/transfun.E95.A.1347
JO - IEICE TRANSACTIONS on Fundamentals
SN - 1745-1337
VL - E95-A
IS - 8
JA - IEICE TRANSACTIONS on Fundamentals
Y1 - August 2012
AB - Clock gating is supported by commercial tools as a power optimization feature based on the guard signal described in HDL (structural method). However, the identification of control signals for gated registers is hard and designer-intensive work. Besides, since the clock gating cells also consume power, it is imperative to minimize the number of inserted clock gating cells and their switching activities for power optimization. In this paper, we propose an automatic multi-stage clock gating algorithm with ILP (Integer Linear Programming) formulation, including clock gating control candidate extraction, constraints construction and optimum control signal selection. By multi-stage clock gating, unnecessary clock pulses to clock gating cells can be avoided by other clock gating cells, so that the switching activity of clock gating cells can be reduced. We find that any multi-stage control signals are also single-stage control signals, and any combination of signals can be selected from single-stage candidates. The proposed method can be applied to 3 or more cascaded stages. The multi-stage clock gating optimization problem is formulated as constraints in LP format for the selection of cascaded clock-gating order of multi-stage candidate combinations, and a commercial ILP solver (IBM CPLEX) is applied to obtain the control signals for each register with minimum switching activity. Those signals are used to generate a gate level description with guarded registers from original design, and a commercial synthesis and layout tools are applied to obtain the circuit with multi-stage clock gating. For a set of benchmark circuits and a Low Density Parity Check (LDPC) Decoder (6.6k gates, 212 F.F.s), the proposed method is applied and actual power consumption is estimated using Synopsys NanoSim after layout. On average, 31% actual power reduction has been obtained compared with original designs with structural clock gating, and more than 10% improvement has been achieved for some circuits compared with single-stage optimization method. CPU time for optimum multi-stage control selection is several seconds for up to 25k variables in LP format. By applying the proposed clock gating, area can also be reduced since the multiplexors controlling register inputs are eliminated.
ER -
English
