This paper describes an embedded software scheme for a single-chip MPEG-2 encoder that executes concurrent video, audio, and system encoding in real-time. The software features a scalable module structure, which is hierarchically composed and has expandable plug-in modules. For increased applicability, several task-modules are prepared for the respective video, audio, and system processing. In addition, an effective task management scheme that features polling and interrupt-based task switching has been proposed in order to achieve real-time operation. The software having these features and including all task-modules is implemented on a single media-processor D30V on a single chip MPEG-2 video, audio, and system encoder. This encoder realizes real-time MPEG-2 video encoding, Dolby Digital or MPEG-1 audio encoding, and system encoding that generates TS or PS over 50 Mbps for various applications. Assuming a DVD or DTV encoder system, the software is reconstructed with less than 56.6-kbytes of instruction and 145.6 MIPS performance. The single media-processor with 64-kbytes of instruction RAM and 162 MIPS performance, running at a clock rate of 162 MHz, can successfully accomplish a real-time operation with the proposed embedded software.

An MPEG-2 422P@HL encoder chip set composed of a preprocessing LSI, an encoding LSI, and a motion estimation LSI is described. This chip set realizes a two-type scalability of picture resolution and quality, and executes a hierarchical coding control in the overall encoder system. Due to its scalable architecture, the chip set realizes a 422P@HL video encoder with multi-chip configuration. This single encoding LSI achieves 422P@ML video, audio, and system encoding in real time. It employs an advanced hybrid architecture with a 162 MHz media processor and dedicated video processing hardware. It also has dual communication ports for parallel processing with multi-chip configuration. Transferring of reconstructed data and macroblock characteristic data between neighboring encoder modules is executed via these ports. The preprocessing LSI is fabricated using 0.25 micron three-layer metal CMOS technology and integrates 560 K gates in an area of 12.0 mm 12.0 mm . The encoding LSI is fabricated using 0.25 micron four-layer metal CMOS technology and integrates 11 million transistors in an area of 14.2 mm 14.2 mm . The motion estimation LSI is fabricated using 0.35 micron three-layer metal CMOS technology. It integrates 1.9 million transistors in an area of 8.5 mm 8.5 mm . This chip set makes various system configurations possible and allows for a compact and cost-effective video encoder with high picture quality.