There is a strong demand to enjoy broadband and stable Internet connectivity not only in office and the home but also in high-speed train. Several systems are providing high-speed train with Internet connectivity using various technologies such as leaky coaxial cable (LCX), Wi-Fi, and WiMAX. However, their actual throughputs are less than 2Mbps. We developed a free-space optical (FSO) communication transceiver called LaserTrainComm2014 that achieves the throughput of 1 Gbps between the ground and a train. LaserTrainComm2014 employs a high-speed image sensor for coarse tracking and a quadrant photo-diode (QPD) for accurate tracking. Since the image captured by the high-speed image sensor has several types of noise, image processing is necessary to detect the beacon light of the other LaserTrainComm2014. As a result of field experiments in a vehicle test course, LaserTrainComm2014 achieves handover time of 21 milliseconds (ms) in the link layer at the speed of 60km/h. Even if the network layer signaling takes time of 10 milliseconds, the total communication disruption time due to handover is short enough to provide passengers with Internet connectivity for live streaming Internet applications such as YouTube, Internet Radio, and Skype.

A 5-pole lumped element bandpass filter (BPF) of center frequency 264.05 MHz and fractional bandwidth (FBW) 0.76% is designed and fabricated using YBa2Cu3O7-d (YBCO) thin films deposited on both sides of a MgO substrate(40 mm 40 mm 0.5 mm). The return loss, minimum insertion loss and ripple were measured to be 20.0 dB, less than 0.1 dB and less than 0.1 dB at 70 K, respectively. These results verify both the compactness and low loss characteristics in the VHF band. The simulated frequency response, where the frequency dependences of inductance (L) and capacitance (C) elements and housing effect are taken into account, is in good agreement with the measured frequency response.

Grey model (abbreviated as GM), which is based on Deng's grey theory, has been established as a prediction model. At present, it has been widely applied in many research fields to solve efficiently the predicted problems of uncertainty systems. However, this model has irrational problems concerning the calculation of derivative and background value z since the predicted accuracy of GM is unsatisfying when original data shows great randomness. In particular, the predicted accuracy falls in case of higher-order derivative or multivariate greatly. In this paper, the new calculation methods of derivative and background value z are first proposed to enhance the predicted power according to cubic spline function. The newly generated model is defined as 3spGM. To further improve predicted accuracy, Taylor approximation method is then applied to 3spGM model. We call the improved version as T-3spGM. Finally, the effectiveness of the proposed model is validated with three real cases.