The authors have proposed Multi-Input Multi-Output (MIMO)-Constant Envelope Modulation, (MIMO-CEM), as a power and complexity efficient alternative to MIMO-OFDM, suitable for wireless backhaul networks in which relay nodes are fixed in their positions. One of the major problems hindering the real application of MIMO-CEM is to estimate MIMO channel characteristics. MIMO-CEM is based upon two contrary schemes; one is nonlinear equalization such as maximum likelihood sequence estimator, which needs accurate channel information to replicate the received signal passing through it. The other is a low resolution analog-to-digital converter (ADC), e.g., 1-bit in the default operation that removes the received signal amplitude fluctuation. In this paper, as a solution to the channel estimation problem in MIMO-CEM with low resolution ADC receiver, we propose an adaptive MIMO-CEM channel estimation scheme where iterative adaptive channel estimation is carried out to minimize the error between the received preamble signal and the replicated one. We also prove that Code Division Multiplexing (CDM) preamble transmission is effective in estimating MIMO channel parameters in the presence of large quantization noise. Computer simulation results show that MIMO-CEM with the proposed channel estimator using CDM preambles achieves identical BER performance to that with the ideal channel estimation even in presence of severe quantization noise caused by a low resolution ADC.

Millimeter-wave (mmw) frequency bands, especially 60GHz unlicensed band, are considered as a promising solution for gigabit short range wireless communication systems. IEEE standard 802.11ad, also known as WiGig, is standardized for the usage of the 60GHz unlicensed band for wireless local area networks (WLANs). By using this mmw WLAN, multi-Gbps rate can be achieved to support bandwidth-intensive multimedia applications. Exhaustive search along with beamforming (BF) is usually used to overcome 60GHz channel propagation loss and accomplish data transmissions in such mmw WLANs. Because of its short range transmission with a high susceptibility to path blocking, multiple number of mmw access points (APs) should be used to fully cover a typical target environment for future high capacity multi-Gbps WLANs. Therefore, coordination among mmw APs is highly needed to overcome packet collisions resulting from un-coordinated exhaustive search BF and to increase total capacity of mmw WLANs. In this paper, we firstly give the current status of mmw WLANs with our developed WiGig AP prototype. Then, we highlight the great need for coordinated transmissions among mmw APs as a key enabler for future high capacity mmw WLANs. Two different types of coordinated mmw WLAN architecture are introduced. One is distributed antenna type architecture to realize centralized coordination, while the other is autonomous coordination with the assistance of legacy Wi-Fi signaling. Moreover, two heterogeneous network (HetNet) architectures are also introduced to efficiently extend the coordinated mmw WLANs to be used for future 5th Generation (5G) cellular networks.