The search functionality is under construction.

Author Search Result

[Author] Guohuan HUA(2hit)

1-2hit
  • VCCS Models of DPLEDMOS for PDP Data Driver IC

    Guohuan HUA  Hualong ZHUANG  Shen XU  Weifeng SUN  Zhiqun LI  

     
    PAPER-Semiconductor Materials and Devices

      Vol:
    E96-C No:8
      Page(s):
    1061-1067

    Two voltage controlled current source (VCCS) models of double-channel p-type lateral extended drain MOS (DPLEDMOS) are firstly proposed to analyze the energy recovery circuit (ERC) efficiency of PDP data driver IC. In terms of the mathematical function between ID and VDS, the VCCS models are created. The presented models can be embedded in system software Saber to simulate the ERC waveform of data driver IC. A test board and a PDP system are used to verify the accuracy of the VCCS models. The experimental measurements agree with the simulation results very well and the maximum model error is 3.89%. Simulation results also show that the ERC efficiency of PDP data driver IC is influenced by three factors: the value of charge time TERC, the drain current ID, and the capacitance of CL. In an actual PDP system, TERC is restricted and CL is changeless. The ERC efficiency of PDP data driver IC can be improved significantly by using DPLEDMOS which has higher ID capacity. The proposed VCCS models of DPLEDMOS can be used to predict the ERC efficiency accurately.

  • Analytic Ldi/dt Effect Model Based on Float Ground in Plasma Display Panel Driver System

    Xiaoying HE  Weifeng SUN  Guohuan HUA  Shen XU  Shengli LU  

     
    PAPER-Electronic Displays

      Vol:
    E96-C No:11
      Page(s):
    1428-1435

    An Ldi/dt effect model based on float ground in a plamsa display panel (PDP) driver system is established in this paper. The model is to analyze the noise which appears in power supply and float ground pins of driver integrated circuits. Considering printed circuit board wiring and switching parasitic parameters, firstly Ldi/dt effect due to integrated circuits transition, is explained on the entire float-ground circuit operation. Then an analytic model is deduced and validated, and good agreement is obtained with experimental results. Based on the model, sensitivity analyses of key parameters are done. Finally, design optimisations to prevent the Ldi/dt effect based on float ground are proposed and verified in a PDP system.