A power-aware compiler controllable chip multiprocessor (CMP) is presented and its performance and power consumption are evaluated with the optimally scheduled advanced multiprocessor (OSCAR) parallelizing compiler. The CMP is equipped with power control registers that change clock frequency and power supply voltage to functional units including processor cores, memories, and an interconnection network. The OSCAR compiler carries out coarse-grain task parallelization of programs and reduces power consumption using architectural power control support and the compiler's power saving scheme. The performance evaluation shows that MPEG-2 encoding on the proposed CMP with four CPUs results in 82.6% power reduction in real-time execution mode with a deadline constraint on its sequential execution time. Furthermore, MP3 encoding on a heterogeneous CMP with four CPUs and four accelerators results in 53.9% power reduction at 21.1-fold speed-up in performance against its sequential execution in the fastest execution mode.

The delay time (tdT), power dissipation (PT) and circuit volume of a CMOS register array were minimized. Seven test circuits, each of which had a register array and a single clock tree that generated a pair of complement clock pulses, and a conventional register were fabricated using 90-nm CMOS technology. The register array was constructed with M delay flip-flops (FFs) and the clock tree, which consisted of 2 driver stages. Each driver stage had m inverters, each of which drove M/m FFs where M was fixed at 40 and m varied from 1 to 40. The minimum values of tdT and PT were 0.25 ns and 17.88 µW, respectively, and were both obtained when m was 10. These values were 71.4% and 70.4% of tdT and PT for the conventional register, for which m is 40, respectively. The number of inverters in the clock tree when m was 10 was 21 which was only 25.9% that for the conventional register. The measured results agreed well with SPICE-simulated results. Furthermore, for values of M from 20 to 320, both the minimum tdT and the minimum PT were obtained when m was approximately 1.5 times the square root of M.