This paper proposes a heuristic algorithm for state minimization of incompletely specified finite state machines (FSMs). The strategy is similar to that in ESPRESSO, a wellknown heuristic algorithm for two-level logic minimization. It consists of generating an initial solution, the set of maximal compatibles, and attempting to apply a series of transformations to the solution. The main transformation is to reduce each compatible in the solution and delete unnecessary compatibles by iterative improvements. Other transformations, such as expansion and merging of compatibles, are also introduced for further reduction. When the number of compatibles is likely to be too large to handle explicitly, they are represented by a Binary Decision Diagram. Experimental results show that the proposed method finds better solutions in shorter CPU times for most of the examples than conventional methods.

Full scan design of sequential circuits results in greatly reducing the cost of their test generation. However, it introduces the extra expense of many test clocks to control and observe the values of flip-flops because of the need to shift values for the flip-flops into the scan panh. In this paper we propose a new method of generating compact test sequences for scan-based sequential circuits on the assumption that the number of shift clocks is allowed to vary for each test vector. The method is based on Boolean function manipulation using a shared binary decision diagram (SBDD). Although the test generation algorithm is basically for general sequential circuits, the computational cost is much lower for scan-based sequential circuits than for non-scanbased sequential circuits because the length of a test sequence for each fault is limited. Experimental results show that, for all the tested circuits, test sequences generated by the method require much smaller number of test clocks than compact or minimum test sets for combinational logic part of scan-based sequential circuits. The reduction rate was 48% on the average in the experiments.

Since the time required for testing logic circuits is proportional to the number of test vectors, the size of test sets as well as test generation time is one of the most important factors to be considered in test generation. The size of test sets becomes an essential issue, especially for scan designed circuits, because of the need to shift a test vector serially into the scan path. In this paper, we propose new methods of generating compact test sets to detect al the irredundant single stuck-at faults in combinational circuits. The proposed algorithms calculate a test function for each fault which corresponds to the set of all test vectors for the fault and generate a compact test set by analyzing the test functions. The analysis is based on finding a test vector which detects the largest number of remaining faults. Since our methods select a test vector among all the test vectors, represented by a test function, for a target fault, smaller test sets can be generated, in general, than that by conventional test set compaction methods. The experimental results show that the size of test sets generated by our method is about one-third as large as that without compaction.

This paper proposes a fast multi-cycle path detection method for large sequential circuits. The proposed method is based on ATPG techniques, especially on implication techniques, to use circuit structures and multi-cycle path conditions directly. The method also checks whether or not a multi-cycle path may be invalidated by static hazards at the inputs of flip-flops. Then we explain how to apply the proposed algorithm to real industrial designs. Experimental results show that our method is much faster than conventional ones and that it is efficient enough to handle large industrial designs.