Real-time pulse rate (PR) monitoring based on photoplethysmography (PPG) has been drawn much attention in recent years. However, PPG signal detected under movement is easily affected by random noises, especially motion artifacts (MA), affecting the accuracy of PR estimation. In this paper, a parallel method structure is proposed, which effectively combines wavelet threshold denoising with recursive least squares (RLS) adaptive filtering to remove interference signals, and uses spectral peak tracking algorithm to estimate real-time PR. Furthermore, we propose a parallel structure RLS adaptive filtering to increase the amplitude of spectral peak associated with PR for PR estimation. This method is evaluated by using the PPG datasets of the 2015 IEEE Signal Processing Cup. Experimental results on the 12 training datasets during subjects' walking or running show that the average absolute error (AAE) is 1.08 beats per minute (BPM) and standard deviation (SD) is 1.45 BPM. In addition, the AAE of PR on the 10 testing datasets during subjects' fast running accompanied with wrist movements can reach 2.90 BPM. Furthermore, the results indicate that the proposed approach keeps high estimation accuracy of PPG signal even with strong MA.

This paper presents a wideband inductorless noise-cancelling balun LNA with two gain modes, low NF, and high-linearity for LTE and intermediate-frequency-band (eg. 3.3-3.6GHz, 4.8-5GHz) 5G applications fabricated in 65nm CMOS. The proposed LNA is bonding tested and exhibits a minimum NF of 2.2dB and maximum IIP3 of -3.5dBm. Taking advantage of an off-chip bias inductor in CG stage and a cross-coupled buffer, the LNA occupies high operation frequency up to 5GHz with remarkable linearity and NF as well as compact area.

Artificial blurring is a typical operation in image forging. Most existing image forgery detection methods consider only one single feature of artificial blurring operation. In this manuscript, we propose to adopt feature fusion, with multifeatures for artificial blurring operation in image tampering, to improve the accuracy of forgery detection. First, three feature vectors that address the singular values of the gray image matrix, correlation coefficients for double blurring operation, and image quality metrics (IQM) are extracted and fused using principal component analysis (PCA), and then a support vector machine (SVM) classifier is trained using the fused feature extracted from training images or image patches containing artificial blurring operations. Finally, the same procedures of feature extraction and feature fusion are carried out on the suspected image or suspected image patch which is then classified, using the trained SVM, into forged or non-forged classes. Experimental results show the feasibility of the proposed method for image tampering feature fusion and forgery detection.