The search functionality is under construction.

Author Search Result

[Author] Kengo NISHIMOTO(2hit)

1-2hit
  • A Novel Quad-Band Branched Monopole Antenna with a Filter Suppressing Higher Order Modes

    Shingo YAMAURA  Kengo NISHIMOTO  Yasuhiro NISHIOKA  Ryosuke KOBAYASHI  Takahiro INO  Yoshio INASAWA  

     
    PAPER-Antennas and Propagation

      Pubricized:
    2023/05/16
      Vol:
    E106-B No:10
      Page(s):
    938-948

    This paper proposes a novel quad-band branched monopole antenna with a filter. The proposed antenna has a simple configuration in which branch-elements are added to a basic configuration consisting of a mast and dielectric wires. The antenna is characterized by performances such as wideband impedance matching, gain stabilization, and gain enhancement. Wideband impedance characteristics satisfying the voltage standing ratio of less than 2 are obtained by exciting a parallel resonance at the lowest band and multi-resonance at high bands. The filter suppressing higher order modes is used for gain stabilization, so that averaged gains above 5dBi are obtained at the quad-band. The antenna has a high gain of 11.1dBi because the branch-elements work as an end-fire array antenna at the highest band. Furthermore, it is clarified that an operating frequency is switched by using a variable bandpass filter at the lowest band. Last, a scale model of the antenna is fabricated and measured, then the effectiveness of the proposed antenna is demonstrated.

  • M-Shaped Dielectric Phase Shifter for Beam-Steerable Base-Station Antenna

    Kengo NISHIMOTO  Takeshi OSHIMA  Toru FUKASAWA  Hiroaki MIYASHITA  Yoshihiko KONISHI  Manabu KURIHARA  Yoshiyuki CHATANI  

     
    PAPER-Antennas and Propagation

      Vol:
    E96-B No:8
      Page(s):
    2095-2101

    We propose a simple and small phase shifter for a beam-steerable base-station antenna. This phase shifter has no metallic heterojunction, and the phase shift is controlled by moving an M-shaped dielectric plate between the strip conductor and the ground plane of a strip line. We derive a design equation from the condition that at the center frequency f0, the reflection coefficient = 0. In this phase shifter, the reflection coefficient becomes minimum at f0 regardless of the movement distance, r, of the dielectric plate, and the relationship between the phase shift and r is linear. These characteristics are verified by performing simulations and measurements. The size of the M-shaped dielectric phase shifter is 0.27λ00.12λ0, where λ0 is the free-space wavelength at f0. The insertion loss is smaller than about 0.2 dB within a fractional bandwidth of 10%, and the phase shift can vary from 0 to about 80 degrees.