The beamforming (BF) provided by Massive MIMO is a promising technique for the fifth-generation (5G) mobile communication system. In low SHF bands such as 3-6GHz, fully digital Massive MIMO can be a feasible option. Previous works proposed eigenvector zero-forcing (E-ZF) as a digital precoding algorithm to lower the complexity of block diagonalization (BD). On the other hand, another previous work aiming to reduce complexity of BD due to the number of antenna elements proposed digital fixed BF and channel-state-information based precoding (Digital FBCP) with BD whose parameter is the number of beams. Moreover, in order to lower the complexity of the Digital FBCP with BD while retaining the transmission performance, this paper proposes Digital FBCP with E-ZF as a lower complexity digital BF algorithm. The pros and cons of these digital BF algorithms in terms of transmission performance and computational complexity are clarified to select the most appropriate algorithm for the fully digital Massive MIMO. Furthermore, E-ZF can be implemented to 4.5GHz-band fully digital Massive MIMO equipment only when the number of antenna elements is less than or equal to 64, and thus 5G experimental trial employing E-ZF was carried out in Tokyo, Japan where early 5G commercial services will launch. To the best of our knowledge, this was the first outdoor experiment on 4.5GHz-ban Massive MIMO in a dense urban area. An outdoor experiment in a rural area was also carried out. This paper shows both a coverage performance under the single user condition and system throughput performance under a densely deployed four-user condition in the outdoor experimental trials employing the E-ZF algorithm. We reveal that, in the MU-MIMO experiment, the measured system throughput is almost 80% of the maximum system throughput even if users are closely located in the dense urban area thanks to the E-ZF algorithm.

Massive multiple input and multiple output (Massive MIMO) is a key technique to achieve high system capacity and user data rate for the fifth generation (5G) radio access network (RAN). To implement Massive MIMO in 5G, how much Massive MIMO meets our expectation with various user equipment (UEs) in different environments should be carefully addressed. We focused on using Massive MIMO in the low super-high-frequency (SHF) band, which is expected to be used for 5G commercial bands relatively soon. We previously developed a prototype low-SHF-band centralized-RAN Massive MIMO system that has a flexible active antenna system (AAS)-unit configuration and facilitates advanced radio coordination features, such as coordinated beamforming (CB) coordinated multi-point (CoMP). In this study, we conduct field trials to evaluate downlink (DL) multi-user (MU)-MIMO performance by using our prototype system in outdoor and indoor environments. The results indicate that about 96% of the maximum total DL system throughput can be achieved with 1 AAS unit outdoors and 2 AAS units indoors. We also investigate channel capacity based on the real propagation channel estimation data measured by the prototype system. Compared with without-CB mode, the channel capacity of with-CB mode increases by a maximum of 80% and 104%, respectively, when the location of UEs are randomly selected in the outdoor and indoor environments. Furthermore, the results from the field trial of with-CB mode with eight UEs indicate that the total DL system throughput and user data rate can be significantly improved.