Various electromagnetic (EM) wave applications have become commonplace, and humans are frequently exposed to EM waves. Therefore, the effect of EM waves on the human body should be evaluated. In this study, we focused on the specific absorption rate (SAR) due to the EM waves emitted from smartphones, developed high-resolution numerical smartphone models, and studied the SAR variation by changing the position and tilt angle (the angle between the display of the smartphone model and horizontal plane) of the smartphone models vis-à-vis the human abdomen, assuming the use of the smartphone at various tilt angles in front of the abdomen. The calculations showed that the surface shape of the human model influenced the SAR variation.

This paper proposes a new lossless data compression method, which utilizes a context sorting algorithm. Every symbol in the data can be predicted by taking its immediately preceding characters, or context, into account. The context sorting algorithm sorts a set of all the previous contexts to find the most similar context to the current one. It then predicts the next symbol by sorting previous symbol-context pairs in an order of context similarity. The codeword for the next symbol represents the rank of the symbol in this sorted sequence. The compression performance is evaluated both analytically and empirically. Although the proposed method operates character by character, with no probability distribution used to make a prediction, it has comparable compression performance to the best known data compression utilities.

A radial line slot antenna (RLSA) is a high efficiency and high gain planar antenna. The efficiency of RLSA becomes lower as the aperture size reduces due to rotational asymmetry of the illumination. A concentric array RLSA (CA-RLSA) was proposed to overcome this difficulty. It adopted three new techniques; (1) not spirally but concentrically arrayed slots, (2) a rotating mode feed circuit, (3) matching slot pairs eliminating termination loss. This paper proposes the basic slot design for (1) and (2) of CA-RLSA. Excellent characteristics of very small CA-RLSAs based upon this design are confirmed by measurements.

This paper attempts to analyze theoretically the propagation characteristics in the transverse section of upper body to support on-body wireless communications. The analytical estimation assumes that the human body is structured as a lossy-dielectric circular cylinder with infinite length that consists of the 2/3-muscle equivalent uniform tissue. Each scattering electric field formulation inside and outside of the cylinder is derived for scattering characteristics in the propagation environment including the human body when the source current has the vertical direction to the cylinder surface or the horizontal direction to the cylinder axis. In order to confirm the reliability of the formulation, total electric field distributions at 2.45 GHz are compared with the results by the finite-difference time-domain (FDTD) method. In each current direction, general scattering characteristics and the influence on the total propagation are estimated. Furthermore, from scattering and total electric field intensities evaluated with the variations of operating frequency, radius of the human body, and distance between a source and the human body, propagation characteristics are investigated to assist in the design of a device for on-body propagation channel with the upper body.

This paper introduces a radio frequency identification (RFID) tag for urination detection. The proposed tag is embedded into paper diapers in order to detect the patient's urination immediately. For this tag, we designed an RFID tag antenna at 950MHz, which matches the impedance of the associated integrated circuit (IC) chip. In addition, we calculate the antenna characteristics and measure the reflection coefficient (S11) and radiation pattern of the antenna. The results show that this system can be used to detect urination.

In this paper, small sized arrays with a few elements are investigated. The antenna diameter is assumed to be less than 3λo. The focus of this paper is to compare the gain characteristics of a triangle arrangement with these of a uniform arrangement. The method of moments is used to calculating the gain characteristics. It is shown that the triangle arrangement is not always sufficient to obtain maximum gain for a small-sized antenna with only a few elements. Also, the type of antenna element used greatly influences the required number of elements and the element configuration.

With the development and diverse use of wireless radio terminals, it is necessary to estimate the specific absorption rate (SAR) of the human body from such devices under various exposure situations. In particular, tablet computers may be used for a long time while placed near the abdomen. There has been insufficient evaluation of the SAR for the human body from tablet computers. Therefore, we investigated the SAR of various configurations of a commercial tablet computer using a numerical model with the anatomical structures of Japanese males and females, respectively. We find that the 10-g-averaged SAR of the tablet computer is strongly altered by the tablet's orientation, i.e., from -7.3dB to -22.6dB. When the tablet computer is moved parallel to the height direction, the relative standard deviations of the 10-g averaged SAR for the male and female models are within 40%. In addition, those for the different tilts of the computer are within 20%. The fluctuations of the 10-g-averaged SAR for the seated human models are within ±1.5dB in all cases.

This paper presents a realization of a simple antenna system for land vehicle satellite communication that is tested in experiments conducted on the Engineering Test Satellite-VIII (ETS-VIII). The developed antenna system which was mounted onto a vehicle roof is compact, light weight with simple satellite-tracking operation. In order to realize compact antennas, an onboard-power divider and switching circuit for antenna feeding control are mounted under the array antenna. A Global Positioning System (GPS) module is used to provide accurate information on the vehicle's position and bearing during travelling. A personal computer (PC) is used as the control unit and data logger, which was specifically designed for this application, allow the switching circuit control as well as the retrieving of the received power levels and error rate. The field tests reported in this paper mainly address the tracking performance of the proposed antenna system. Satisfactory results were obtained. Good received power levels and bit error rate (BER) for tracking the ETS-VIII satellite were confirmed. Furthermore, in order to grasp the environmental factors that impact the quality of land vehicle communications, we carefully captured data at obstacles such as buildings, foliages, utility poles and highway overpasses. The results showed blockage and shadowing was confirmed. Additionally, when the antenna was tested at the inclined-road for simple propagation characteristics in elevation direction, stable reception of the satellite signals was realized.

In this paper, the authors propose a circularly polarized printed antenna combining a slot array antenna and a patch antenna, with dual-band operation. The proposed antenna has good isolation performance, is compact, and has simple configuration. This antenna is composed of two parts, a patch antenna (for Rx) on the top, and a slot array antenna (for Tx) on the bottom, respectively. The element layout is such that the lower radiation element is not hidden by the upper one for wide observation angle. Hence, both radiation elements can naturally radiate the targeted polarization. Both slot array and patch antenna are fed by electromagnetically coupled microstrip line feed. With such a configuration, it is possible to efficiently obtain good isolation characteristics for both frequency bands. Furthermore, this antenna can be easily composed and it is not necessary to use any feeding pin or via hole. The target of this antenna is mobile communications applications such as mobile satellite communications, base-station of wireless LAN, etc. Here, the design techniques are discussed and the numerical and experimental analyses are presented.

Hyperthermia is one of the modalities for cancer treatment, utilizing the difference of thermal sensitivity between tumor and normal tissue. Interstitial microwave hyperthermia is one of the heating schemes and it is applied to a localized tumor. In the treatments, heating pattern control around antennas are important, especially for the treatment in and around critical organs. This paper introduces a coaxial-dipole antenna, which is one of the thin microwave antennas and can generate a controllable heating pattern. Moreover, generations of an arbitrary shape heating patterns by an array applicator composed of four coaxial-dipole antennas are described.

In recent years, capsule endoscopy has attracted attention as one of the medical devices that examine internal digestive tracts without burdening patients. Wireless power transmission of the capsule endoscope has been researched now, and the power transmission efficiency can be improved by knowing the capsule location. In this paper, we develop a localization method wireless power transmission. Therefore, a simple algorithm for using received signal strength (RSS) has been developed so that position estimation can be performed in real time, and the performance is evaluated by performing three-dimensional localization with eight receiving antennas.

A Radial Line Slot Antenna (RLSA) is a planar antenna for DBS reception. It is a kind of slotted waveguide arrays. The conductor loss is so small that high efficiency is expected irrespective of the aperture diameter. On the other hand, since a RLSA utilizes the traveling waves, the frequency bandwidth is limited by the long line effect, particularly for a larger antenna. A new Wide-Band RLSA (WB-RLSA) is proposed which halves the waveguide length and widens the frequency bandwidth. This paper presents the design and experimental results of a model antenna. A gain of 33.7dBi is measured at the edge of 800MHz bandwidth and its high potential is demonstrated.

This paper proposes a circuit modeling technique for electrically-very-small devices, e.g. electrodes for intrabody communications, coils for wireless power transfer systems, high-frequency transformers, etc. The proposed technique is based on the method of moments and can be regarded as an improved version of the partial element equivalent circuit method.

The proportion of persons over 65 years old is projected to increase worldwide between 2022 and 2050. The increasing burden on medical staff and the shortage of human resources are growing problems. Bedsores are injuries caused by prolonged pressure on the skin and stagnation of blood flow. The more the damage caused by bedsores progresses, the longer the treatment period becomes. Moreover, patients require surgery in some serious cases. Therefore, early detection is essential. In our research, we are developing a non-contact bedsore detection system using electromagnetic waves at 10.5GHz. In this paper, we extracted appropriate information from a scalogram and utilized it to detect the sizes of bedsores. In addition, experiments using a phantom were conducted to confirm the basic operation of the bedsore detection system. As a result, using the approximate curves and lines obtained from prior analysis data, it was possible to estimate the volume of each defected area, as well as combinations of the depth of the defected area and the length of the defected area. Moreover, the experiments showed that it was possible to detect bedsore presence and estimate their sizes, although the detection results had slight variations.

In recent years, MIMO technology which uses multiple antennas has been introduced to the mobile terminal to increase communication capacity per unit frequency. However, if MIMO antennas are put closely, a strong mutual coupling occurred. Moreover, CA which uses multiple frequencies is also utilized to improve communication speed. Therefore, reducing mutual coupling in multiple frequencies is required. In this paper, we propose a dual-band decoupling method by using a short stub and a branch element and confirmed that the proposed model performed decoupling, increased radiation efficiency.

The impedance expansion method (IEM), which has been previously proposed by the authors, is a circuit-modeling technique for electrically-very-small devices. This paper provides a new idea on the principle of undesired radiation in wireless power transfer systems by employing IEM. In particular, it is shown that the undesired radiation is due to equivalent infinitesimal dipoles and loops of the currents on the coils.

A radial line slot antenna (RLSA) is a high gain and high efficiency planar array. A single-layered RLSA is much simple in structure but the slot length must be varied to synthesize uniform aperture illumination. These are now commercialized for 12GHz band DBS reception. In RLSAs, considerable power is dissipated in the termination as is common to other traveling wave antennas; the uniform aperture illumination is not the optimum condition for high gain in RLSAs. Authors proposed a theoretical method reducing the termination loss for further efficiency enhancement. This paper presents the measured performances of the SL-RLSAs of this design with non-uniform aperture illumination. The efficiency enhancement of about 10% is observed; the measured gain of 36.7dBi (87%) and 32.9dBi (81%) for a 0.6mφ and 0.4mφ antennas respectively verify this technique.

Recently, wearable wireless devices or terminals have become hot a topic not only in research but also in business. Implantable wireless devices can temporarily be utilized to monitor a patient's condition in an emergency situation or to identify people in highly secured places. Unlike conventional wireless devices, wearable or implantable devices are used on or in the human body. In this sense, body-centric wireless communications (BCWCs) have become a very active area of research. Radio-frequency or microwave medical devices used for cancer treatment systems and surgical operation have completely different functions, but they are used on or in the human body. In terms of research techniques, such medical devices have a lot of similarities to BCWCs. The antennas to be used in the vicinity of the human body should be safe, small and robust. Also, their interaction with the human body should be well considered. This review paper describes some of the wearable antennas as well as implantable antennas that have been studied in our laboratory.

Although the effect of electromagnetic interference on an implanted cardiac pacemaker due to a nearby mobile phone has been investigated, there have been few studies on the enhancement of the specific absorption rate (SAR) around an implanted cardiac pacemaker due to a nearby mobile phone. In this study, the SAR distribution around a pacemaker model embedded in a parallelepiped torso phantom when a mobile phone was nearby was numerically calculated and experimentally measured. The results of both investigations showed a characteristic SAR distribution. The system presented can be used to estimate the effects of electromagnetic interference on implanted electric circuits and thus could lead to the development of guidelines for the safe use of mobile radio terminals near people with medical implants.