The recent progress of the performance of a CMOS-LSI is rapid and continuous, and the required bandwidth for communication between chips will be enormous. Dense optical interconnects by smart pixels may be used to such an application because it would have enough bandwidth and short delay of signaling. On-chip and chip-to-chip optical interconnects and electrical interconnects were compared and the advantages of the use of optics were indicated. For on-chip communication, high-speed (70% of the velocity of the light) propagation of signals by optical interconnects are useful and it enables whole chip synchronization. The considerable reduction of power dissipation using optics was estimated for chip-to-chip interconnects. The effect of hybrid integration with small parasitic capacitance was simulated and the sensitivity improvement of more than 13 dB was expected. How to fabricate a smart pixel is the most difficult subject. We had successfully fabricated smart pixels with VCSELs and PDs using polyimide bonding technique. CW lasing of the VCSEL was observed and it proved that the polyimide bonding technique was useful to making smart pixels. The integrated receiver was also fabricated in the same manner. It showed a high sensitivity of -9.2 dBm for a bit-rate of 622 Mbit/s. High-performance characteristics of the receiver resulted from the low parasitic integration with polyimide bonding technique.

Demountable connectors with L-shaped plugs for multiple fibers were produced by precision transfer molding using improved phenolic resin. They showed a low connecting loss of 0.48 dB and sufficient stability to withstand the ambient temperature variation.

Cryptographic hash functions have been widely studied and are used in many current systems. Though much research has been done on the security of hash functions, system designers cannot determine which hash function is most suitable for a particular system. The main reason for this is that the current security classification does not correspond very well to the security requirements of practical systems. This paper describes a new classification which is more suitable for designing real-life systems. This classification is the result of a new qualitative classification and a new quantitative classification. We show a mapping between each class and standard protocols. In addition, we show new requirements for four types of hash function for a future standard.

This paper reports on time-space conversion-based differential processing of optical signals using a high-resolution arrayed-waveguide grating (AWG) and a spatial filter at a wavelength of 1.55 µm. We clarify the advantages of the AWG device and show where it is applicable. In order to reduce loss at the spatial filter, we propose a new phase-only filter that functions as a differential filter. The difference between the exact differential filter and the proposed phase-only filter is calculated theoretically. We confirm experimentally that the optical pulse can be differentiated by the proposed filter. For application of differential processing, we also proposed a phase modulation to amplitude modulation (PM-AM) conversion and demonstrated the PM-AM conversion at 10 Gbit/s signals using a PSK-non-return-to-zero (NRZ) format.

This paper reports on time-space conversion-based differential processing of optical signals using a high-resolution arrayed-waveguide grating (AWG) and a spatial filter at a wavelength of 1.55 µm. We clarify the advantages of the AWG device and show where it is applicable. In order to reduce loss at the spatial filter, we propose a new phase-only filter that functions as a differential filter. The difference between the exact differential filter and the proposed phase-only filter is calculated theoretically. We confirm experimentally that the optical pulse can be differentiated by the proposed filter. For application of differential processing, we also proposed a phase modulation to amplitude modulation (PM-AM) conversion and demonstrated the PM-AM conversion at 10 Gbit/s signals using a PSK-non-return-to-zero (NRZ) format.