Analog and digital collaborative design techniques for wireless SoCs are reviewed in this paper. In wireless SoCs, delicate analog performance such as sensitivity of the receiver is easily degraded due to interferences from digital circuit blocks. On the other hand, an analog performance such as distortion is strongly compensated by digital assist techniques with low power consumption. In this paper, a sensitivity recovery technique using the analog and digital collaborative design, and digital assist techniques to achieve low-power and high-performance analog circuits are presented. Such analog and digital collaborative design is indispensable for wireless SoCs.

In cognitive radio systems using TV white space, it is desirable to secure a control channel to exchange the wireless network control information and to secure minimum frequency resource for secondary user communications if TV white space is unavailable. In order to satisfy these requirements, this paper proposes guard band utilization, which aggregates the multiple guard bands between digital TV signals and uses them for a control channel and/or a communication channel. To investigate the feasibility of the proposed scheme, this paper evaluates the performance degradation of the digital TV signals when the guard band is used. Furthermore, it discusses the permissible transmitting power and occupied bandwidth of the guard band signals to avoid the harmful interference to the digital TV signals.

Impulsive noise interference is a significant problem for the Integrated Services Digital Broadcasting for Terrestrial (ISDB-T) receivers due to its effect on the orthogonal frequency division multiplexing (OFDM) signal. In this paper, an adaptive scheme to suppress the effect of impulsive noise is proposed. The impact of impulsive noise can be detected by using the guard band in the frequency domain; furthermore the position information of the impulsive noise, including burst duration, instantaneous power and arrived time, can be estimated as well. Then a time-domain window function with adaptive parameters, which are decided in terms of the estimated information of the impulsive noise and the carrier-to-noise ratio (CNR), is employed to suppress the impulsive interference. Simulation results confirm the validity of the proposed scheme, which improved the bit error rate (BER) performance for the ISDB-T receivers in both AWGN channel and Rayleigh fading channel.

This paper presents a single-chip RF tuner/OFDM demodulator for a mobile digital TV application called “1-segment broadcasting.” To achieve required performances for the single-chip receiver, a tunable technique for a low-noise amplifier (LNA) and spurious suppression techniques are proposed in this paper. Firstly, to receive all channels from 470 MHz to 770 MHz and to relax distortion characteristics of following circuit blocks such as an RF variable-gain amplifier and a mixer, a tunable technique for the LNA is proposed. Then, to improve the sensitivity, spurious signal suppression techniques are also proposed. The single-chip receiver using the proposed techniques is fabricated in 90 nm CMOS technology and total die size is 3.26 mm 3.26 mm. Using the tunable LNA and suppressing undesired spurious signals, the sensitivities of less than -98.6 dBm are achieved for all the channels.

In this letter, a new feedback equalization scheme to suppress inter-carrier interference (ICI) in an OFDM system using scattered pilot is investigated. On a fast fading channel severe ICI occurs due to a Doppler shift and it deteriorates a bit error rate (BER) seriously because of small subcarrier spacing. In an ISDB-T receiver the equalization is mainly processed in a frequency domain because the scattered pilot is transmitted over the subcarriers. However, the frequency domain equalization may not suppress severe ICI in the case of the fast fading channel with a large Doppler shift. The proposed equalization scheme uses the scattered pilot symbols transformed in a time domain as the reference signal for feedback taps. Numerical results through computer simulation show that the proposed scheme improves the BER performance especially with low carrier-to-noise ratio (CNR) conditions.

With the increase of communication demand and the emergence of new services, various innovative wireless technologies have been deployed recently. Free Space Optics (FSO) links combined with Radio over Fiber (RoF) technology can realize a cost-effective heterogeneous wireless access system for both urban and rural areas. In this paper, we introduce a newly developed advanced DWDM Radio-on-FSO (RoFSO) system capable of simultaneously transmitting multiple Radio Frequency (RF) signals carrying various wireless services including W-CDMA, WLAN IEEE802.11g and ISDB-T signals over FSO link. We present an experimental performance evaluation of transmitting RF signals using the RoFSO system over a 1 km link under different deployment environment conditions. This work represents a pioneering attempt, based on a realistic operational scenario, aiming at demonstrating the RoFSO system can be conveniently used as a reliable alternative broadband wireless technology for complementing optical fiber networks in areas where the deployment of optical fiber is not feasible.

In our application targeted here, four on-glass antenna elements are set in an automobile to improve the reception quality of mobile ISDB-T receiver. With regard to the directional characteristics of each antenna, we propose and implement a joint Pre-FFT adaptive array antenna and Post-FFT space diversity combining (AAA-SDC) scheme for mobile ISDB-T receiver. By applying a joint hardware and software approach, a flexible platform is realized in which several system configuration schemes can be supported; the receiver can be reconfigured on the fly. Simulation results show that the AAA-SDC scheme drastically improves the performance of mobile ISDB-T receiver, especially in the region of large Doppler shift. The experimental results from a field test also confirm that the proposed AAA-SDC scheme successfully achieves an outstanding reception rate up to 100% while moving at the speed of 80 km/h.

In this paper, an adaptive array antenna is implemented to enhance the performance of digital TV ISDB-T reception. Issues of realizing the proposed array antenna and its implementation by a joint hardware-software solution are also presented in this paper. Instead of using known reference signals, the proposed method utilizes the GI (Guard Interval) and a periodic property of OFDM signal as a constraint to realize MRC (Maximum Ratio Combining) and SMI (Sample Matrix Inversion) adaptive beam-forming algorithms. Experimental results show that the proposed system drastically improves the quality of reception. Moreover, the proposed system can achieve excellent performance under the conditions of strong interferences.

Japanese terrestrial digital broadcasting (ISDB-T) began in 2003. To spread its signals throughout the country, optical fibers will be used to complement radio-wave networks. This paper describes recent applications of optical transmission of ISDB-T. It also describes our research on re-transmission with 40-GHz Radio On Fiber technology.