Adaptive polarization mode dispersion (PMD) compensation is required for the speed-up and advancement of the present optical communications. The combination of a tunable PMD compensator and its adaptive control method achieves adaptive PMD compensation. In this paper, we report an effective search control algorithm for the feedback control of the PMD compensator. The algorithm is based on the hill-climbing method. However, the step size changes randomly to prevent the convergence from being trapped at a local maximum or a flat, unlike the conventional hill-climbing method. The randomness depends on the Gaussian probability density functions. We conducted transmission simulations at 160 Gb/s and the results show that the proposed method provides more optimal compensator control than the conventional hill-climbing method.

We experimentally demonstrated polarization-mode dispersion (PMD) compensation by distributing polarizers with only 1 degree of freedom (DOF) along the transmission line. The average power penalty was measured to be 0.4 dB by inserting four compensators, where average differential group delay was 47% of bit period.

The operation of a polarization mode dispersion (PMD) compensator using a polarizer and a Faraday rotator-based polarization controller (FRPC) is analyzed in detail, and the compensation performance is experimentally evaluated in 40 Gbit/s operation. The evaluation results show that a wide range of differential group delay over a bit period can almost be completely compensated using the PMD compensator. The characteristics of electrical spectrum-based signal monitoring methods are investigated in detail, and the results shows advantages of a low frequency band monitoring method that produces about double the wider dynamic range than a fundamental repetition frequency monitoring method. The automated PMD compensator using a polarizer and a FRPC driven by the low frequency band monitoring method is experimentally investigated using a terrestrial 40 Gbit/s wavelength division multiplexing system involving 350-km installed single-mode fibers. The PMD compensator produces highly stable signal performance in the field environment for a long term and reduces the standard deviation of the Q-factor distribution.