In this paper, we propose a real-time BSS (Blind Source Separation) system with two microphones that extracts only desired sound sources. Under the assumption that the desired sound sources are close to the microphones, the proposed BSS system suppresses distant sound sources as undesired sound sources. We previously developed a BSS system that can estimate the distance from a microphone to a sound source and suppress distant sound sources, but it was not a real-time processing system. The proposed BSS system is a real-time version of our previous BSS system. To develop the proposed BSS system, we simplify some BSS procedures of the previous system. Simulation results showed that the proposed system can effectively suppress the distant source signals in real-time and has almost the same capability as the previous system.

In this letter, we propose a new blind source separation method, independent low-rank matrix analysis based on generalized Kullback-Leibler divergence. This method assumes a time-frequency-varying complex Poisson distribution as the source generative model, which yields convex optimization in the spectrogram estimation. The experimental evaluation confirms the proposed method's efficacy.

In this work, a multiple source separation method with joint sparse and non-sparse components recovery is proposed by using dual similarity determination. Specifically, a dual similarity coefficient is designed based on normalized cross-correlation and Jaccard coefficients, and its reasonability is validated via a statistical analysis on a quantitative effective measure. Thereafter, by regarding the sparse components as a guide, the non-sparse components are recovered using the dual similarity coefficient. Eventually, a separated signal is obtained by a synthesis of the sparse and non-sparse components. Experimental results demonstrate the separation quality of the proposed method outperforms some existing BSS methods including sparse components separation based methods, independent components analysis based methods and soft threshold based methods.

In this paper, we first propose two batch blind source separation and equalization algorithms based on support vector regression (SVR) for linear time-invariant multiple input multiple output (MIMO) systems. The proposed algorithms combine the conventional cost function of SVR with error functions of classical on-line algorithm for blind equalization: both error functions of constant modulus algorithm (CMA) and radius directed algorithm (RDA) are contained in the penalty term of SVR. To recover all sources simultaneously, the cross-correlations of equalizer outputs are included in the cost functions. Simulation experiments show that the proposed algorithms can recover all sources successfully and compensate channel distortion simultaneously. With the use of iterative re-weighted least square (IRWLS) solution of SVR, the proposed algorithms exhibit low computational complexity. Compared with traditional algorithms, the new algorithms only require fewer samples to achieve convergence and perform a lower residual interference. For multilevel signals, the single algorithms based on constant modulus property usually show a relatively high residual error, then we propose two dual-mode blind source separation and equalization schemes. Between them, the dual-mode scheme based on SVR merely requires fewer samples to achieve convergence and further reduces the residual interference.

The information maximization (Infomax) based on information entropy theory is a class of methods that can be used to blindly separate the sources. Torkkola applied the Infomax criterion to blindly separate the mixtures where the sources have been delayed with respect to each other. Compared to the frequency domain methods, this time domain method has simple adaptation rules and can be easily implemented. However, Torkkola's method works only in the real valued field. In this letter, the Infomax for blind separation of the delayed sources is extended to the complex case for processing of complex valued signals. Firstly, based on the gradient ascent the adaptation rules for the parameters of the unmixing network are derived and the steps of algorithm are given. Then, a measurement matrix is constructed to evaluate the separation performance. The results of computer experiment support the extended algorithm.

This letter presents a two-stage method to extend the degenerate unmixing estimation technique (DUET) for reverberant speech separation. First, frequency-bin-wise attenuation and delay parameters are introduced and estimated by online update rules, to handle early reflections. Next, a mask reestimation algorithm based on the precedence effect is developed to detect and fix the errors on binary masks caused by late reflections. Experimental results demonstrate that the proposed method improves separation performance significantly.

Cognitive radio (CR) is a key solution for the problem of inefficient usage of spectral resources. Spectrum sensing in each CR aims at detecting whether a preassigned spectrum band is occupied by a primary user or not. Conventional techniques do not allow the CR to communicate with its own base station during the spectrum sensing process. So, only a part of the frame can be used for cognitive data transmission. In this paper, we introduce a new spectrum sensing framework that combines a blind source separation technique with conventional spectrum sensing techniques. In this way, the cognitive transmitter can continue to transmit during spectrum sensing, if it was in operation in the previous frame. Moreover, the accuracy is improved since the decision made by the spectrum unit in each frame depends on the decision made in the previous frame. We use Markov chain tools to model the behavior of our spectrum sensing proposal and to derive the parameters that characterize its performance. Numerical results are provided to confirm the superiority of the proposed technique compared to conventional spectrum sensing techniques.

A sound field reproduction method is proposed that uses blind source separation and a head-related transfer function. In the proposed system, multichannel acoustic signals captured at distant microphones are decomposed to a set of location/signal pairs of virtual sound sources based on frequency-domain independent component analysis. After estimating the locations and the signals of the virtual sources by convolving the controlled acoustic transfer functions with each signal, the spatial sound is constructed at the selected point. In experiments, a sound field made by six sound sources is captured using 48 distant microphones and decomposed into sets of virtual sound sources. Since subjective evaluation shows no significant difference between natural and reconstructed sound when six virtual sources and are used, the effectiveness of the decomposing algorithm as well as the virtual source representation are confirmed.

We propose a new algorithm for the blind source separation (BSS) approach in which independent component analysis (ICA) and frequency subband beamforming interpolation are combined. The slow convergence of the optimization of the separation filters is a problem in ICA. Our approach to resolving this problem is based on the relationship between ICA and null beamforming (NBF). The proposed method consists of the following three parts: (I) a frequency subband selector part for learning ICA, (II) a frequency domain ICA part with direction-of-arrivals (DOA) estimation of sound sources, and (III) an interpolation part in which null beamforming constructed with the estimated DOA is used. The results of the signal separation experiments under a reverberant condition reveal that the convergence speed is superior to that of the conventional ICA-based BSS methods.

Fetal electrocardiogram (FECG) extraction is of vital importance in biomedical signal processing. A promising approach is blind source extraction (BSE) emerging from the neural network fields, which is generally implemented in a semi-blind way. In this paper, we propose a robust extraction algorithm that can extract the clear FECG as the first extracted signal. The algorithm exploits the fact that the FECG signal's kurtosis value lies in a specific range, while the kurtosis values of other unwanted signals do not belong to this range. Moreover, the algorithm is very robust to outliers and its robustness is theoretically analyzed and is confirmed by simulation. In addition, the algorithm can work well in some adverse situations when the kurtosis values of some source signals are very close to each other. The above reasons mean that the algorithm is an appealing method which obtains an accurate and reliable FECG.

FeedForward (FF-) Blind Source Separation (BSS) systems have some degree of freedom in the solution space. Therefore, signal distortion is likely to occur. First, a criterion for the signal distortion is discussed. Properties of conventional methods proposed to suppress the signal distortion are analyzed. Next, a general condition for complete separation and distortion-free is derived for multi-channel FF-BSS systems. This condition is incorporated in learning algorithms as a distortion-free constraint. Computer simulations using speech signals and stationary colored signals are performed for the conventional methods and for the new learning algorithms employing the proposed distortion-free constraint. The proposed method can well suppress signal distortion, while maintaining a high source separation performance.

A time domain (TD) speech enhancement technique to improve SNR in noise-contaminated speech is proposed. Additional supplementary scheme is applied to estimate the degree of noise of noisy speech. This is estimated from a function, which is previously prepared as the function of the parameter of the degree of noise. The function is obtained by least square (LS) method using the given degree of noise and the estimated parameter of the degree of noise. This parameter is obtained from the autocorrelation function (ACF) on frame-by-frame basis. This estimator almost accurately estimates the degree of noise and it is useful to reduce noise. The proposed method is based on two-stage processing. In the first stage, subtraction in time domain (STD), which is equivalent to ordinary spectral subtraction (SS), is carried out. In the result, the noise is reduced to a certain level. Further reduction of noise and by-product noise residual is carried out in the second stage, where blind source separation (BSS) technique is applied in time domain. Because the method is a single-channel speech enhancement, the other signal is generated by taking the noise characteristics into consideration in order to apply BSS. The generated signal plays a very important role in BSS. This paper presents an adaptive algorithm for separating sources in convolutive mixtures modeled by finite impulse response (FIR) filters. The coefficients of the FIR filter are estimated from the decorrelation of two mixtures. Here we are recovering only one signal of interest, in particular the voice of primary speaker free from interfering noises. In the experiment, the different levels of noise are added to the clean speech signal and the improvement of SNR at each stage is investigated. The noise types considered initially in this study consist of the synthesized white and color noise with SNR set from 0 to 30 dB. The proposed method is also tested with other real-world noises. The results show that the satisfactory SNR improvement is attained in the two-stage processing.

In this study, we propose a robust approach for blind source separation (BSS) by using radial basis function networks (RBFNs) and higher-order statistics (HOS). The RBFN is employed to estimate the inverse of a hypothetical complicated mixing procedure. It transforms the observed signals into high-dimensional space, in which one can simply separate the transformed signals by using a cost function. Recently, Tan et al. proposed a nonlinear BSS method, in which higher-order moments between source signals and observations are matched in the cost function. However, it has a strict restriction that it requires the higher-order statistics of sources to be known. We propose a cost function that consists of higher-order cumulants and the second-order moment of signals to remove the constraint. The proposed approach has the capacity of not only recovering the complicated mixed signals, but also reducing noise from observed signals. Simulation results demonstrate the validity of the proposed approach. Moreover, a result of application to X-ray image separation also shows its practical applicability.

We propose utilizing subband-based blind source separation (BSS) for convolutive mixtures of speech. This is motivated by the drawback of frequency-domain BSS, i.e., when a long frame with a fixed long frame-shift is used to cover reverberation, the number of samples in each frequency decreases and the separation performance is degraded. In subband BSS, (1) by using a moderate number of subbands, a sufficient number of samples can be held in each subband, and (2) by using FIR filters in each subband, we can manage long reverberation. We confirm that subband BSS achieves better performance than frequency-domain BSS. Moreover, subband BSS allows us to select a separation method suited to each subband. Using this advantage, we propose efficient separation procedures that consider the frequency characteristics of room reverberation and speech signals (3) by using longer unmixing filters in low frequency bands and (4) by adopting an overlap-blockshift in BSS's batch adaptation in low frequency bands. Consequently, frequency-dependent subband processing is successfully realized with the proposed subband BSS.

We propose a new two-stage blind separation and deconvolution strategy for multiple-input multiple-output (MIMO)-FIR systems driven by colored sound sources, in which single-input multiple-output (SIMO)-model-based ICA (SIMO-ICA) and blind multichannel inverse filtering are combined. SIMO-ICA can separate the mixed signals, not into monaural source signals but into SIMO-model-based signals from independent sources as they are at the microphones. After the separation by the SIMO-ICA, a blind deconvolution technique for the SIMO model can be applied even when each source signal is temporally correlated and the mixing system has a nonminimum phase property. The simulation results reveal that the proposed algorithm can successfully achieve separation and deconvolution of a convolutive mixture of speech, and outperforms a number of conventional ICA-based BSD methods.

In this paper, we address the blind separation problem of binaural mixed signals, and we propose a novel blind separation method, in which a self-generator for initial filters of Single-Input-Multiple-Output-model-based independent component analysis (SIMO-ICA) is implemented. The original SIMO-ICA which has been proposed by the authors can separate mixed signals, not into monaural source signals but into SIMO-model-based signals from independent sources as they are at the microphones. Although this attractive feature of SIMO-ICA is beneficial to the binaural sound separation, the current SIMO-ICA has a serious drawback in its high sensitivity to the initial settings of the separation filter. In the proposed method, the self-generator for the initial filter functions as the preprocessor of SIMO-ICA, and thus it can provide a valid initial filter for SIMO-ICA. The self-generator is still a blind process because it mainly consists of a frequency-domain ICA (FDICA) part and the direction of arrival estimation part which is driven by the separated outputs of the FDICA. To evaluate its effectiveness, binaural sound separation experiments are carried out under a reverberant condition. The experimental results reveal that the separation performance of the proposed method is superior to those of conventional methods.

This paper overviews a total solution for frequency-domain blind source separation (BSS) of convolutive mixtures of audio signals, especially speech. Frequency-domain BSS performs independent component analysis (ICA) in each frequency bin, and this is more efficient than time-domain BSS. We describe a sophisticated total solution for frequency-domain BSS, including permutation, scaling, circularity, and complex activation function solutions. Experimental results of 22, 33, 44, 68, and 22 (moving sources), (#sources#microphones) in a room are promising.

Frequency domain blind source separation has the great advantage that the complicated convolution in time domain becomes multiple efficient multiplications in frequency domain. However, the inherent ambiguity of permutation of ICA becomes an important problem that the separated signals at different frequencies may be permuted in order. Mapping the separated signal at each frequency to a target source remains to be a difficult problem. In this paper, we first discuss the inter-frequency correlation based method, and propose a new method using the continuity in power between adjacent frequency components of same source. The proposed method also implicitly utilizes the information of inter-frequency correlation, as such has better performance than the previous method.

In this paper, single-input multiple-output (SIMO)-model-based blind source separation (BSS) is addressed, where unknown mixed source signals are detected at microphones, and can be separated, not into monaural source signals but into SIMO-model-based signals from independent sources as they are at the microphones. This technique is highly applicable to high-fidelity signal processing such as binaural signal processing. First, we provide an experimental comparison between two kinds of SIMO-model-based BSS methods, namely, conventional frequency-domain ICA with projection-back processing (FDICA-PB), and SIMO-ICA which was recently proposed by the authors. Secondly, we propose a new combination technique of the FDICA-PB and SIMO-ICA, which can achieve a higher separation performance than the two methods. The experimental results reveal that the accuracy of the separated SIMO signals in the simple SIMO-ICA is inferior to that of the signals obtained by FDICA-PB under low-quality initial value conditions, but the proposed combination technique can outperform both simple FDICA-PB and SIMO-ICA.

This paper presents a new method for blind source separation by exploiting phase and frequency redundancy of cyclostationary signals in a complementary way. It requires a weaker separation condition than those methods which only exploit the phase diversity or the frequency diversity of the source signals. The separation criterion is to diagonalize a polynomial matrix whose coefficient matrices consist of the correlation and cyclic correlation matrices, at time delay τ= 0, of multiple measurements. An algorithm is proposed to perform the blind source separation. Computer simulation results illustrate the performance of the new algorithm in comparison with the existing ones.