In this paper, we propose an interactive system for controlling the pressure while cutting paper with a knife. The purpose is to improve the cutting skill of novices learning the art of paper-cutting. Our system supports skill improvement for novices by measuring and evaluating their cutting pressure in real-time. In this study, we use a knife with a blade attached to a stylus with a pressure sensor, which can measure the pressure, coordinates, and cutting time. We have developed a similar support system using a stylus and a tablet device. This system allows the user to experience the pressure of experts through tracing. Paper-cutting is created by cutting paper with a knife. The practice system in this paper provides practice in an environment more akin to the production of paper cutting. In the first experiment, we observed differences in cutting ability by comparing cutting pressures between novices and experts. As a result, we confirmed that novices cut paper at a higher pressure than experts. We developed a practice system that guides the novices on controlling the pressure by providing information on the cutting pressure values of experts. This system shows the difference in pressure between novices and experts using a synchronous display of color and sound. Using these functions, novices learn to adjust their cutting pressure according to that of experts. Determining the right cutting pressure is a critical skill in the art of paper-cutting, and we aim to improve the same with our system. In the second experiment, we tested the effect of the practice system on the knife device. We compared the changes in cutting pressure with and without our system, the practice methods used in the workshop, and the previously developed stylus-based support system. As a result, we confirmed that practicing with the knife device had a better effect on the novice's skill in controlling cutting pressure than other practice methods.

To improve the cutting skills of learners, we developed a method for improving the skill involved in creating paper cuttings based on a steering task in the field of human-computer interaction. TaWe made patterns using the white and black boundaries that make up a picture. The index of difficulty (ID) is a numerical value based on the width and distance of the steering law. First, we evaluated novice and expert pattern-cutters, and measured their moving time (MT), error rate, and compliance with the steering law, confirming that the MT and error rate are affected by pattern width and distance. Moreover, we quantified the skills of novices and experts using ID and MT based models. We then observed changes in the cutting skills of novices who practiced with various widths and evaluated the impact of the difficulty level on skill improvement. Patterns considered to be moderately difficult for novices led to a significant improvement in skills.

Aspect-oriented software development (AOSD) helps to solve the problem of low scalability and high maintenance costs of legacy systems caused by code scattering and tangling by extracting cross-cutting concerns and inserting them into aspects. Identifying the cross-cutting concerns of legacy systems is the key to reconstructing such systems using the approach of AOSD. However, current dynamic approaches to the identification of cross-cutting concerns simply check the methods' execution sequence, but do not consider their calling context, which may cause low precision. In this paper, we propose an improved comprehensive approach to the identification of candidate cross-cutting concerns of legacy systems based on the combination of the analysis of recurring execution relations and fan-ins. We first analyse the execution trace with a given test case and identify four types of execution relations for neighbouring methods: exit-entry, entry-exit, entry-entry and exit-exit. Afterwards, we measure the methods' left cross-cutting degrees and right cross-cutting degrees. The former ensures that the candidate recurs in a similar running context, whereas the latter indicates how many times the candidate cross-cuts different methods. The final candidates are then obtained from those high fan-in methods, which not only cross-cut others more times than a predefined threshold, but are always entered or left under the same running context. The experiment conducted on three open source systems shows that our approach improves the precision of identifying cross-cutting concerns compared with tradition ones.

Identification of early aspects is the critical problem in aspect-oriented requirement engineering. But the representation of crosscutting concerns is various, which makes the identification difficult. To address the problem, this paper proposes the AspectQuery method based on goal model. We analyze four kinds of goal decomposition models, then summarize the main factors about identification of crosscutting concerns and conclude the identification rules based on a goal model. A goal is crosscutting concern when it satisfies one of the following conditions: i) the goal is contributed to realize one soft-goal; ii) parent goal of the goal is candidate crosscutting concern; iii) the goal has at least two parent goals. AspectQuery includes four steps: building the goal model, transforming the goal model, identifying the crosscutting concerns by identification rules, and composing the crosscutting concerns with the goals affected by them. We illustrate the AspectQuery method through a case study (a ticket booking management system). The results show the effectiveness of AspectQuery in identifying crosscutting concerns in the requirement phase.

This paper proposes a novel fiber endface preparation tool for optical fiber joints that employs thermal surface cleaning and thermal endface cutting. This tool has great advantages in terms of fiber endface preparation time, and fiber endface stability when fiber is cut repeatedly. Stable thermal surface cleaning and thermal endface cutting are achieved by selecting suitable heating conditions. The fiber endface preparation time can be reduced to 50% of that required with conventional tools. The fiber endface stability obtained using thermal cutting is more than five times better than that obtained with the conventional tool using a blade.

We developed a process to fabricate optical functions such as, lens, prism, or diffuser directly on to a glass substrate. Processes include precision mastering by diamond cutting, and multi-layer photopolymer (2P) molding process to realize flat surface and integration of multiple functions with a good alignment within few micrometers.

The one dimensional cutting stock problem (1D-CSP) is one of the representative combinatorial optimization problems, which arises in many industries. As the setup costs of cutting patterns become more dominant in recent cutting industry, we consider a variant of 1D-CSP, in which the total number of applications of cutting patterns is minimized under the constraint that the number of different cutting patterns is specified in advance. We propose a local search algorithm that uses the neighborhood obtained by perturbating one cutting pattern in the current set of patterns, where the perturbations are done by utilizing the dual solution of the auxiliary linear programming problem (LP). In this process, in order to solve a large number of LPs, we start the criss-cross variation of the simplex algorithm from the optimal simplex tableau of the previous solution, instead of starting it from scratch. According to our computational experiment, it is observed that the proposed algorithm obtains a wide variety of good solutions which are comparable to the existing heuristic approaches.