Silica-based planar lightwave circuits (PLCs) are reviewed in terms of WDM applications. Four types of basic multiplexer are described and compared. Some topical applications of these multiplexers are introduced with their WDM systems. We conclude that because of these various applications, silica-based PLCs will play an important role in future WDM systems.

An insertion loss, branching deviation and polarization dependent loss (PDL) as to a 2 N optical splitter using silica-based planar lightwave circuits has been investigated. New key technologies such as (1) a novel wedge type Y-branch, (2) an offset waveguide at the junction between the curved input waveguide and the Y-branch, and (3) low birefringence waveguides due to the appropriate dopant concentration of a cladding, have been devised and incorporated into the splitter. As a result, 2 N optical splitters with low average insertion loss ( 13.2 dB), low branching deviation ( 0.4 dB) and low PDL ( 0.2 dB) have been successfully developed.

This paper describes the design and performance of optical components for in-service fiber testing and monitoring in optical subscriber loops. As the number of test fibers increases, compact and cost-effective components are becoming more important. To meet this need, we have developed a highly-dense hybrid structure for optical couplers and filters, which both play key roles in testing systems. It was realized by utilizing a polyimide-base thin film filter and a waveguide-type wavelength insensitive coupler. This component operates by combining a signal and a test light with a ratio of 80/20% and isolating the test light with a value of 50 dB. The experimental samples were successfully fabricated with an excess loss of 1 dB, a return loss of 40 dB, a plolarization dependent loss (PDL) of 0.3 dB, and good environmental and mechanical stability. We successfully applied the samples to an optical branch module (OBM), and achieved a component density twice that of a conventional module. The optical characteristics of the OBM met our target values. The results we obtained for termination cords incorporating the polyimide-base filter were also satisfactory.

We propose an InGaAlAs waveguide p-i-n photodiode (WG-PD) with a thick symmetric double-core for surface-hybrid integration onto optical platforms, which can be applied to low cost optical modules for access networks. The waveguide structure is designed to efficiently couple to flat-ended single mode fibers while maintaining low-voltage (less than 2 V) operation. Crystal growth conditions and a passivation technique are also investigated for obtaining high responsivity, low dark current and highly reliable operation. Fiber-coupled responsivity as high as 0.95 A/W, at a 1.3-µm wavelength, and vertical coupling tolerance as wide as 2.6 µm are demonstrated for a dispersion-shifted fiber (DSF) coupling at an operating voltage of 2 V. Dark current is as low as 300 pA at 25 and 12 nA at 100. A temperature accelerated aging test is performed to show the feasibility of using the WG-PD in long-term practical applications.

This paper describes the technological issues in achieving a low-cost hybrid WDM module for access network systems. The problems which should be resolved in developing a low-cost module are clarified from the viewpoint of the module assembly in mass production. A design concept for a low-cost module suitable for mass production is indicated, which simplifies the alignment between a laser diode and a waveguide, and reduces the number of the components such as lenses and mirrors. The low-cost module is achieved by employing a flip-chip bonding method with passive alignment using a spot-size converter integrated laser diode (SS-LD) and p-i-n waveguide photodiodes (WGPDs) on a planar lightwave circuit (PLC) platform. We confirm that the SS-LD and the WGPD provide high coupling efficiency with a large tolerance for passive alignment. To achieve a high-sensitivity receiver, the module is designed to employ an asymmetric PLC Y-splitter that prefers a PD responsivity to an LD output power because of the high-coupling efficiency of the LD, and to employ a bare preamplifier mounting to reduce the parasitic capacitance into a preamplifier. We also demonstrate the dynamic performance for a 50-Mb/s burst signal, such as a high sensitivity, an instantaneous AGC response, and a small APC deviation of the transceiver.

Precise direct mounting of laser diode (LD) and photodiode (PD) chips on silica planar lightwave circuits (PLCs) has been investigated for application to transceiver modules. To achieve submicron optical alignment, self-aligned index marks on the PLCs and LDs were directly detected by transmission infrared light. The repeatability of the positioning was measured to be within 0.125 µm. The output power of the resultant module was 0.2 mW at 80 mA. A waveguide-type PD was also mounted in the same way, and module sensitivity of 0.25 A/W was demonstrated.

A strictly nonblocking 88 matrix switch was designed and fabricated using silica-based planar lightwave circuits (PLC) on a silicon substrate. The average insertion loss was 11 dB in the TE mode and 11.3 dB in the TM mode. The average switch element extinction ratio was 16.7 dB in the TE mode and 17.7 dB in the TM mode. The accumulated crosstalk was estimated to be 7.4 dB in the TE mode and 7.6 dB in the TM mode. The driving power of the phase shifter required for switching was about 0.5 W and the polarization dependence of the switching power was 4%. The switching response time was 1.3 msec. The wavelength range with a switch extinction ratio of over 15 dB was 1.31 µm30 nm.