Majority-logic algorithms are devised for decoding non-binary LDPC codes in order to reduce computational complexity. However, compared with conventional belief propagation algorithms, majority-logic algorithms suffer from severe bit error performance degradation. This paper presents a low-complexity reliability-based algorithm aiming at improving error correcting ability of majority-logic algorithms. Reliability measures for check nodes are novelly introduced to realize mutual update between variable message and check message, and hence more efficient reliability propagation can be achieved, similar to belief-propagation algorithm. Simulation results on NB-LDPC codes with different characteristics demonstrate that our algorithm can reduce the bit error ratio by more than one order of magnitude and the coding gain enhancement over ISRB-MLGD can reach 0.2-2.0dB, compared with both the ISRB-MLGD and IISRB-MLGD algorithms. Moreover, simulations on typical LDPC codes show that the computational complexity of the proposed algorithm is closely equivalent to ISRB-MLGD algorithm, and is less than 10% of Min-max algorithm. As a result, the proposed algorithm achieves a more efficient trade-off between decoding computational complexity and error performance.

Recently, Haley and Grant introduced the concept of reversible codes – a class of binary linear codes that can reuse the decoder architecture as the encoder and encodable by the iterative message-passing algorithm based on the Jacobi method over F2. They also developed a procedure to construct parity check matrices of a class of reversible codes named type-I reversible codes by utilizing properties specific to circulant matrices. In this paper, we refine a mathematical framework for reversible codes based on circulant matrices through a ring theoretic approach. This approach enables us to clarify the necessary and sufficient condition on which type-I reversible codes exist. Moreover, a systematic procedure to construct all circulant matrices that constitute parity check matrices of type-I reversible codes is also presented.

Reducing the power dissipation for LDPC code decoder is a major challenging task to apply it to the practical digital communication systems. In this paper, we propose a low power LDPC code decoder architecture based on an intermediate message-compression technique which features as follows: (i) An intermediate message compression technique enables the decoder to reduce the required memory capacity and write power dissipation. (ii) A clock gated shift register based intermediate message memory architecture enables the decoder to decompress the compressed messages in a single clock cycle while reducing the read power dissipation. The combination of the above two techniques enables the decoder to reduce the power dissipation while keeping the decoding throughput. The simulation results show that the proposed architecture improves the power efficiency up to 52% and 18% compared to that of the decoder based on the overlapped schedule and the rapid convergence schedule without the proposed techniques respectively.

In this paper, we propose a power-efficient LDPC decoder architecture based on an accelerated message-passing schedule. The proposed decoder architecture is characterized as follows: (i) Partitioning a pipelined operation not to read and write intermediate messages simultaneously enables the accelerated message-passing schedule to be implemented with single-port SRAMs. (ii) FIFO-based buffering reduces the number of SRAM banks and words of the LDPC decoder based on the accelerated message-passing schedule. The proposed LDPC decoder keeps a single message for each non-zero bit in a parity check matrix as well as a classical schedule while achieving the accelerated message-passing schedule. Implementation results in 0.18 [µm] CMOS technology show that the proposed decoder architecture reduces an area of the LDPC decoder by 43% and a power dissipation by 29% compared to the conventional architecture based on the accelerated message-passing schedule.

In this paper, we propose a partially-parallel LDPC decoder which achieves a high-efficiency message-passing schedule. The proposed LDPC decoder is characterized as follows: (i) The column operations follow the row operations in a pipelined architecture to ensure that the row and column operations are performed concurrently. (ii) The proposed parallel pipelined bit functional unit enables the column operation module to compute every message in each bit node which is updated by the row operations. These column operations can be performed without extending the single iterative decoding delay when the row and column operations are performed concurrently. Therefore, the proposed decoder performs the column operations more frequently in a single iterative decoding, and achieves a high-efficiency message-passing schedule within the limited decoding delay time. Hardware implementation on an FPGA and simulation results show that the proposed partially-parallel LDPC decoder improves the decoding throughput and bit error performance with a small hardware overhead.