The search functionality is under construction.

Keyword Search Result

[Keyword] multi-carrier(62hit)

21-40hit(62hit)

  • A Study on Power and Bit Assignment of Embedded Multi-Carrier Modulation Schemes for Hierarchical Image Transmission over Digital Subscriber Line

    Charlene GOUDEMAND  Francois-Xavier COUDOUX  Marc GAZALET  

     
    LETTER-Transmission Systems and Transmission Equipment for Communications

      Vol:
    E89-B No:7
      Page(s):
    2071-2073

    In this letter, we study the problem of designing an efficient power and bit allocation scheme in the context of a hierarchical image transmission system based on an embedded multi-carrier modulation (EMCM) scheme over digital subscriber line. Authors describe a novel algorithm that performs power minimization under bit rate constraint and QoS requirement. It is based on the Hughes-Hartogs algorithm, and successively allocates the bits of the high, then low priority data streams. Simulations that assess the performance of the proposed algorithm are also provided and discussed; they demonstrate the interest of the proposed scheme.

  • Parallel Interference Cancellation Scheme Based on Sorting Method for a Multi-Carrier DS/CDMA System

    Jaewon PARK  Shiquan PIAO  Yongwan PARK  

     
    PAPER-Wireless Communication Technologies

      Vol:
    E89-B No:6
      Page(s):
    1781-1792

    In this paper, we introduce a Parallel Interference Canceller (PIC) based on a sorting method to improve the performance in the MC-DS/CDMA environment. A conventional PIC estimates and cancels out all of the MAI (Multiple Access Interference) for each user in parallel. The parallel process ensures a limited delay for the detection of all users. Since the performance of PIC is strongly related to the correct MAI estimation, we introduce an interference cancellation scheme to estimate accurately the MAI of the weaker interferers than the desired signal. The principle of proposed IC (Interference cancellation) scheme is to sort in descending order from the strength of the signal and subtracted by the MAI of the strong interferer from the weak signal. Therefore, the signal of the weak interferer becomes a better estimation. Following this, the output of the front processing is achieved by a rank operation of the signals in an ascending order of strength. Then the strong signal eliminates the improved weak interferer. Resulting from this, the proposed scheme obtains a better BER performance than the conventional PIC, because the accuracy of the strong signal has been improved. However, a disadvantage exists in that the processing time has a slightly longer delay than the PIC-1stage owing to a two step processing, including the sorting one.

  • Fast Optimal Bit and Power Allocation Based on the Lagrangian Method for OFDM Systems

    Sang-Min LEE  Dong-Jo PARK  

     
    PAPER-Wireless Communication Technologies

      Vol:
    E89-B No:4
      Page(s):
    1346-1353

    This paper examines the bit and power allocation problem for orthogonal frequency division multiplexing systems in which the overall transmission power is minimized by constraining the fixed data rate and bit error rate. To provide the optimal allocation with less computational complexity, we propose new bit and power allocation schemes based on the Lagrangian method. Firstly, we propose an initial search range of the bisection search method to find the optimal Lagrangian multiplier efficiently. The simulation results verify that the proposed initial search range guarantees the optimal solution with less computational complexity. Secondly, a new iterative search method for the optimal Lagrangian multiplier is proposed using Newton's search method. The simulation results demonstrate that the proposed scheme has significant computational advantages over the conventional algorithms while providing optimal performance.

  • Forward-Link Capacity Analysis for MC-CDMA

    Hyukmin SON  Sanghoon LEE  

     
    LETTER-Network

      Vol:
    E88-B No:10
      Page(s):
    4094-4096

    OFDM-based networks utilizing the frequency reuse factor of 1 may produce the severe ICI (intercell interference) at the cell boundary even though overall cell capacity is increased and network deployment is facilitated. In the forward-link, the ICI may rise above a QoS (quality of service) threshold beyond some distance from BSs (base stations). In this paper, we analyze the forward-link capacity of an MC-CDMA system as a function of the ICI according to the distance from a cell. To achieve this goal, a closed form of the outage probability is derived and utilized to obtain the accommodated number of users and system parameters.

  • Criterion for Reducing Error Rate Degradation by Nonlinear Amplifier for Multicarrier Transmission

    Osamu TAKYU  Tomoaki OHTSUKI  Masao NAKAGAWA  

     
    LETTER-Wireless Communication Technologies

      Vol:
    E88-B No:7
      Page(s):
    3057-3061

    One of the drawbacks of multicarrier transmission schemes is that the transmitted signals have high peak-to-average power ratio (PAPR). When PAPR of the signal is larger than the input-back off (IBO) of the high power amplifier (HPA), signal powers larger than the saturation threshold of the HPA cause the saturation events so that the error rate performance is degraded. To improve the error-rate performance degraded by the nonlinear distortion, not only the signal power above the saturation threshold but also the interval of the signals causing the saturation events at HPA should be reduced. In this paper, we propose the total exceeding power (TEP) as a new criterion for improving the error rate performance degraded by the nonlinear amplifier for multicarrier transmission.

  • Multicarrier Power Amplifier Linearization Based on Artificial Intelligent Methods

    Masoud FAROKHI  Mahmoud KAMAREI  S. Hamaidreza JAMALI  

     
    PAPER-Electronic Circuits

      Vol:
    E88-C No:4
      Page(s):
    744-752

    This paper presents two new intelligent methods to linearize the Multi-Carrier Power Amplifiers (MCPA). One of the them is based on the Neuro-Fuzzy controller while the other uses two small neural networks as a polar predistorter. Neuro-Fuzzy controllers are not model based, and hence, have ability to control the nonlinear systems with undetermined parameters. Both methods are adaptive, low complex, and can be implemented in base-band part of the communication systems. The performance of the linearizers is obtained via simulation. The simulation is performed for three different scenarios; namely, a multi-carrier amplifier for GSM with four channels, a CDMA amplifier and a multi-carrier amplifier with two tones. The simulation results show that Neuro-Fuzzy Controller (NFC) and Neural Network Polar Predistorter (NNPP) have higher efficiencies so that reduce IMD3 by more than 42 and 32 dB, respectively. The practical implementation aspects of these methods are also discussed in this paper.

  • Direct Implementation of Space-Time MC-CDMA Receiver with Adaptive Linearly Constrained Constant Modulus Algorithm

    Shiunn-Jang CHERN  Chung-Yao CHANG  

     
    PAPER-Wireless Communication Technologies

      Vol:
    E88-B No:2
      Page(s):
    698-705

    To support high data rate wireless communications, in this paper, based on the linearly constrained constant modulus (LCCM) criterion, the reverse link performance of the multi-carrier code division multiple access (MC-CDMA) receiver, with frequency combiner, and having smart antenna arrays beamformer in base station, has been investigated over the Rayleigh fading channel. By using the Kronecker product an equivalent direct formulation, which integrates the information of spatial-domain as well as temporal-domain, with constraint matrix could be obtained. In consequence, the modified normalized LCCM-gradient algorithm is devised to adaptively implement the direct constrained optimal weights solution of the fully space-time MC-CDMA detector. We show that the proposed method outperforms the constrained minimum output energy (CMOE) algorithm and is more robust against to the signal mismatch, due to imperfect channel and direction-of-arrival estimation used in the array beamformer.

  • A Frequency Scheduling Method for MC-CDM

    Shigehiko TSUMURA  Yoshitaka HARA  Shinsuke HARA  

     
    PAPER-Wireless Communication Technologies

      Vol:
    E88-B No:2
      Page(s):
    706-715

    Multi-carrier code division multiplexing (MC-CDM) is one of promising multiplexing techniques for fourth-generation mobile downlink communications systems, where high data rate services should be provided even for high speed-cruising mobiles. For MC-CDM-based packet communication, a frequency scheduling method, which adaptively assigns different sub-carriers to different users, is proposed. This paper proposes a frequency scheduling method, which utilizes pre-assignmented subcarriers in the frequency domain for the MC-CDM scheme. Furthermore, the performance of the proposed system in frequency selective fading channels is compared with that of a no-scheduled MC-CDM scheme by computer simulation in both single- and multi-cell environments. From the results, it is found that the proposed system achieves better bit error rate performance than the no-scheduled MC-CDM scheme and can control quality of service (QoS) for active users.

  • Two Dimensional Combined Complementary Sequence and Its Application in Multi-Carrier CDMA

    Chao ZHANG  Xiaokang LIN  Mitsutoshi HATORI  

     
    PAPER

      Vol:
    E88-B No:2
      Page(s):
    478-486

    Multi-Carrier CDMA (MC-CDMA) has been considered as a combination of the techniques of Code Division Multiple Access (CDMA) and Orthogonal Frequency Division Multiplex (OFDM). However, even until now, the efficient MC-CDMA scheme is still under study because of the inherent bugs in OFDM, such as the troubles caused by Multiple Access Interference (MAI) and Peak to Average Power Ratio (PAPR). In this paper, we present a novel two-dimensional spreading sequence named "Two Dimensional Combined Complementary Sequence" (TDC). If we take this kind of sequences as spreading codes, several prominent advantages can be achieved compared with traditional MC-CDMA. First, it can achieve MAI free in the multi-path transmission both in uplink and downlink. Second, it offers low PAPR value within 3 dB with a quite simple architecture. The last but not the least, the proposed MC-CDMA scheme turns out to be an efficient approach with high bandwidth efficiency, high spreading efficiency and flexible transmission rate enriched by a special shift-and-add modulation. Meanwhile, an algorithm that constructs TDC sequences is discussed in details. Based on above results, we can get the conclusion that the novel TDC sequences and corresponding MC-CDMA architecture have great potential for applications in next generation wireless mobile communications, which require high transmission rate in hostile and complicated channels.

  • Crest Factor Reduction for Complex Multi-Carrier Signal Processing

    Young-Hwan YOU  Min-Goo KANG  Han-Jong KIM  Pan-Yuh JOO  Hyoung-Kyu SONG  

     
    LETTER-Digital Signal Processing

      Vol:
    E88-A No:1
      Page(s):
    378-380

    One of the main disadvantage of multi-carrier CDMA (MC-CDMA) signals is the high peak power of the transmitted signals which limits their applications. To account for this issue, we provide a simple signal processing for reducing the high crest factor (CF) of MC-CDMA signals. Using this modified MC-CDMA signal, the high CF due to Walsh spreading sequences can be mitigated without explicit side information and degradation in the detection performance.

  • Multi-Code Multi-Carrier CDMA Modulation with Adaptive Bit-Loading for VDSL Modems

    Massimo ROVINI  Giovanni VANINI  Luca FANUCCI  

     
    PAPER

      Vol:
    E86-A No:8
      Page(s):
    1985-1992

    This paper presents a new modulation scheme for Very-High Speed Digital Subscriber Lines (VDSL) modem, featuring a Multi-Code Multi-Carrier Code Division Multiple Access (MC2-CDMA) modulation. The system takes advantage from both the CDMA modulation and the Multi-Carrier transmission, and furthermore the channel throughput is increased adopting a multi-code approach. Starting from an overview of this novel scheme, encompassing the transmitter, channel and receiver description, a brief review of the equalization techniques is also considered and a proper bit-loading algorithm is derived to find out the achievable overall channel rate. The aim of this paper, besides introducing this novel scheme, is to demonstrate its suitability for a VDSL environment, where the achievable channel rate represents a real challenge. By means of a further optimisation, a general improvement of the system performance with respect to the standardized Discrete Multi Tone (DMT) modulation is also demonstrated.

  • Experimental Demonstration of 622 Mbps Millimeter-Wave over Fiber Link for Broadband Fixed Wireless Access System

    Yozo SHOJI  Hiroyo OGAWA  

     
    PAPER-Photonic Links for Wireless Communications

      Vol:
    E86-C No:7
      Page(s):
    1129-1137

    We experimentally demonstrated a remote antenna system based on a millimeter-wave (MMW) over fiber scheme for 622-Mbps broadband fixed wireless access systems. In this system, the format of the RF signal is based on a four-carrier signal in which each carrier is modulated by using 64-QAM, to reduce the complexity of the RF system in comparison with the single-carrier QAM system using many more signal-points than 64. The remote antenna system based on the IF-over-fiber scheme was also experimentally demonstrated, as well as the MMW over fiber scheme for comparison. From the experimental results, we found that the remote antenna system based on the MMW over fiber scheme is effective not only from the viewpoints of miniaturization of the remote antenna station and ability to provide a stable millimeter-wave frequency, but also from the viewpoint of link performances such as allowable dynamic range and power penalty, even though the scheme's E/O and O/E devices have a higher cost.

  • Radio Link Capacity Comparison between MC/DS-CDMA and MC-CDMA in Reverse Link Broadband Wireless Access

    Shingo SUWA  Hiroyuki ATARASHI  Mamoru SAWAHASHI  

     
    PAPER

      Vol:
    E86-A No:7
      Page(s):
    1645-1655

    This paper compares the radio link capacity between multi-carrier/DS-CDMA (MC/DS-CDMA) and multi-carrier CDMA (MC-CDMA) for reverse-link broadband packet wireless access taking into consideration: the asynchronous signal reception at the receiver; the path timing or symbol timing detection of all major subject factors; and the channel estimation error. Simulation results show that although the influence of the asynchronous signal reception on the packet error rate (PER) performance in MC-CDMA is slight, the degradation caused by the channel estimation error in MC-CDMA is severe compared to that caused by the path timing detection error in MC/DS-CDMA. Consequently, the required average received signal energy per bit-to-background noise spectrum density ratio (Eb/N0) at the average PER of 10-2 in MC/DS-CDMA is reduced by approximately 4.5 dB compared to that in MC-CDMA assuming a 12-path exponential decayed Rayleigh fading channel. Furthermore, the number of accommodated users in MC/DS-CDMA is 2.5 fold greater than that in MC-CDMA employing two-branch antenna diversity reception. Therefore, we conclude that MC/DS-CDMA is more appropriate than MC-CDMA for the reverse link broadband packet wireless access, and that it has advantageous features such as an inherently much lower peak-to-average power ratio compared to MC-CDMA, which accompanies a high peak-to-average power ratio causing an increase in the back-off of the power amplifier.

  • A Peak Reduction Scheme Based on Control Signal Insertion for Multi-Carrier Mobile Communication Systems

    Shigeru TOMISATO  Hiroshi SUZUKI  

     
    PAPER-Wireless Communication Technology

      Vol:
    E86-B No:6
      Page(s):
    1910-1916

    This paper proposes a new signal peak power reduction technique, Peak Reduction based on Control Signal Insertion (PRCSI), for broadband mobile communications based on multi-channel signaling schemes. PRCSI reduces the peak power with a peak control signal that is generated symbol-by-symbol; no signal band expansion is incurred because the peak control signal is inserted into the transmission signal band. PRCSI can achieve 4 dB peak power reduction for 8-carrier signaling, while the Eb/N0 value required to achieve 10-3 average BER is 1 dB larger with PRCSI than without it. This BER performance degradation can effectively be compensated by the proper use of Trellis coding. The proposed technique is applied to OFDM transmission systems with large carrier number. The proposed technique can achieve 3-dB peak power ratio for 128-carrier OFDM signals with less than 1-dB performance degradation at the BER of 10-3.

  • A Symbol Synchronizer for Multi-Carrier Spread-Spectrum Systems

    Shigetaka GOTO  Akira OGAWA  

     
    LETTER

      Vol:
    E85-A No:12
      Page(s):
    2881-2885

    In this paper, we propose and describe a new synchronizer for the FFT timing applicable to multi-carrier spread-spectrum (MC-SS) communication systems. The performance of the synchronizer is evaluated in terms of false- and miss-detection probabilities in the presence of additive white Gaussian noise (AWGN) and Rayleigh fading.

  • A New OFDM Demodulation Method with Variable-Length Effective Symbol and ICI Canceller

    Noriyoshi SUZUKI  Hideyuki UEHARA  Mitsuo YOKOYAMA  

     
    PAPER

      Vol:
    E85-A No:12
      Page(s):
    2859-2867

    In an orthogonal frequency division multiplexing (OFDM) system, the bit error performance is degraded in the presence of multiple propagation paths whose excess delays are longer than the Guard Interval (GI), because the orthogonality between subcarriers cannot be maintained. In this paper, we propose a new OFDM demodulation method with a variable-length effective symbol and a multi-stage inter-carrier interference (ICI) canceller, in order to improve the bit error performance in the presence of multipaths whose excess delays are longer than the GI. The influence of the inter-symbol interference (ISI) is eliminated by the variable-length effective symbol, and then the ICI component is reduced by the multi-stage ICI canceller. The principle of the proposed method is explained, and the performance of the proposed method is then evaluated by computer simulation. The results show that the proposed method improves the system availability under more various multipath fading environments without changing the system parameters.

  • OFDM Demodulation Method with Variable Effective Symbol Duration

    Noriyoshi SUZUKI  Tsutayuki SHIBATA  Nobuo ITOH  Mitsuo YOKOYAMA  

     
    PAPER

      Vol:
    E85-A No:7
      Page(s):
    1665-1674

    In an orthogonal frequency division multiplexing (OFDM) system, the bit error performance is degraded in the presence of multiple propagation paths whose excess delays are longer than the Guard Interval (GI), because the orthogonality between subcarriers cannot be maintained. Therefore, the GI has to be long enough for an expected delay spread of the channel. On the other hand, a long GI causes a decrease in transmission efficiency. In this paper, we propose a new OFDM demodulation method with a variable effective symbol duration, in order to improve the bit error performance in the presence of multipaths whose excess delays are longer than the GI. The proposed method can realize more stable radio communication systems under a multipath propagation environment even if a propagation path whose excess delay is longer than the GI exists. In other words, the proposed method can improve transmission efficiency without performance degradation by a shortened GI under the same environment. The principle of the proposed method is explained, and the bit error probability of the proposed method is analyzed theoretically in an AWGN channel and a multipath fading channel. The performance of the proposed method is then evaluated by computer simulation. The results show that the proposed method improves the system availability under more various multipath fading environments without changing the system parameters.

  • Bandwidth Division Type Parallel Combinatory DS-CDMA System

    Masashi AKAIWA  Katsuhiro KAMAKURA  Takahiko SABA  

     
    PAPER-Communication Systems

      Vol:
    E84-A No:10
      Page(s):
    2427-2435

    This paper proposes a bandwidth division type parallel combinatory (PC) spread spectrum (SS) modulation scheme. In the proposed system, a given system bandwidth for the conventional single-carrier PC-SS system is divided into H subbands, and H PC-SS signals are transmitted in parallel. We evaluate the frame error rate (FER) of the proposed system under the asynchronous CDMA environment. We show that the proposed scheme provides a smaller FER than the single-carrier PC-SS system for a given information bit rate. We also show that the proposed scheme attains a higher information bit rate than the single-carrier PC-SS system for a given FER.

  • BER Analysis for Multi-Carrier DS CDMA with Multi-Rate Traffic

    Abbas SANDOUK  Masaaki HARADA  Hiraku OKADA  Takaya YAMAZATO  Masaaki KATAYAMA  Akira OGAWA  

     
    LETTER

      Vol:
    E84-A No:7
      Page(s):
    1723-1731

    In this letter, we present bit error analysis (BER) of orthogonal multi-carrier direct sequence code division multiple access (DS-CDMA) system with multi-rate (multimedia) traffic. Analysis is carried out with random signature codes for an AWGN channel. Interference in such a system is severe because all users of all media transmit over the same assigned sub-carriers. This makes the analysis difficult. In our analysis, we divide this interference into different types and carry out our analysis to obtain the BER taking into account all these types. We show that the performance of the system is improved as the number of assigned sub-carriers M increases until a limit where the improvement does not continue even when M increases more. This is because of, as we show, the interference due to other sub-carriers becomes constant even in the case of M , and the interference in a multi-rate multi-carrier system is bigger than that in a single-carrier (M=1) by a factor of π2/3.

  • Performance of Coherent Multi-Carrier/DS-CDMA and MC-CDMA for Broadband Packet Wireless Access

    Sadayuki ABETA  Hiroyuki ATARASHI  Mamoru SAWAHASHI  Fumiyuki ADACHI  

     
    PAPER

      Vol:
    E84-B No:3
      Page(s):
    406-414

    This paper compares the packet error rate (PER) performance of three access schemes, i.e., single-carrier (SC)/DS-CDMA, multi-carrier (MC)/DS-CDMA, and MC-CDMA assuming an 80-MHz bandwidth in order to achieve an optimum broadband packet wireless access scheme. In a broadband propagation channel, severe multipath interference degrades the accuracy of timing detection of multipath components (path search) and channel estimation required for coherent detection. Computer simulation results show that, in the reverse link, SC/DS-CDMA achieves better performance than MC/DS-CDMA because the pilot signal power in one sub-carrier required for path search and channel estimation decreases as the number of sub-carriers increases. The superiority of MC-CDMA to MC (SC)/DS-CDMA in the forward link is also demonstrated, because frequency diversity is effectively utilized in association with the mitigation of a much longer symbol duration than the delay spread in MC-CDMA, meanwhile a higher degree of multipath interference offsets the Rake time diversity in MC (SC)/DS-CDMA in a broadband multipath fading channel.

21-40hit(62hit)