A Brillouin optical correlation domain reflectometry (BOCDR) system, which can set measuring point to arbitrary distance that is aligned in a random order along an optical fiber (i.e., random accessibility), is proposed to measure dynamic strain and experimentally evaluated. This random-access system can allocate measurement bandwidth to measuring point by assigning the measurement times at each measuring point of the total number of strain measurements. This assigned number is not always equally but as necessary for plural objects with different natural frequencies. To verify the system, strain of two vibrating objects with different natural frequencies was measured by one optical fiber which is attached to those objects. The system allocated appropriate measurement bandwidth to each object and simultaneously measured dynamic strain corresponding to the vibrating objects.

An optical fiber biosensor using adsorption LB films has been investigated for the application to the glucose detection in blood. The adsorption LB film containing glucose oxidase (GOD: the enzyme in human body) was deposited on the core portion of optical fiber and the variation of absorption spectra due to the reactions of GOD, glucose, and hemoglobin was measured. The relatively high response time of 60 s and glucose sensitivity as low as 20 mg/dl were obtained. The results demonstrate that the optical fiber bio-sensor using adsorption LB film can be used as a glucose sensor.

We have developed a distributed optical fiber strain sensor for detecting the collapse of river embankments. The sensor uses a Brillouin optical time domain reflectometer (BOTDR) and consists of an optical fiber cable and pieces of nonwoven cloth. Pieces of cloth are fixed to the cable at 1.5-meter intervals and it is then embedded in a U-shaped configuration in a river embankment. The pieces of cloth are displaced when there is movement of the soil in which they are embedded. If one of two adjacent pieces of cloth remains stationary while the other moves, the optical fiber between the two pieces is stretched. The collapse of an embankment can be detected by using a BOTDR to monitor any such stretching in the 1.5-m lengths of fiber. The developed sensor operates at a sensitivity of 0.025%/kgf, which is equivalent to 0.067%/mm, and is thus capable of detecting soil movements of a few mm in river embankments. The sensor is also able to provide effective advance warning of the collapse of a river embankment resulting from water penetration. We subjected the sensor system to field tests that demonstrated the effectiveness of its construction and its long-term stability. The developed sensor system is an effective tool for use in river management systems of the very near future.

We applied a Brillouin-OTDR, which is a distributed optical fiber strain sensor, to two actual concrete piles. The piles were made for use as highway foundations by on-site-pouring at construction sites and underwent load testing to ensure that their characteristics satisfied the required levels. Compressive strain caused by the load exerted on the piles was measured to an accuracy of 0.01% and a spatial resolution of 1 m. This measurement was obtained by embedding a strain-sensing optical fiber in the piles during construction. The results showed that there was good agreement between the measured strain and both the theoretical values and the values obtained with a conventional strain gauge based on electric resistance. Furthermore, the obtained strain distribution reflected the effects of friction between the pile surface and the ground. These results demonstrate the effectiveness of the Brillouin-OTDR for this kind of testing and also as a means of obtaining detailed data on the strain in concrete piles.

A novel technique has been developed for in situ sensing of thin film growth. In this method, a fiber optic probe is placed at an appropriate position in a deposition chamber, and the thin film builds up on the end of the fiber. This film is either the same as on the wafer where deposition occurs, or it bears a fixed relationship to the film on the wafer. By an analysis of the intensity of the light reflected from the film and guided by the fiber, information on the film may be obtained. With interference causing maxima, minima and a point of inflection as the film grows, it is possible to obtain near real time information on the following quantities: the real and imaginary parts of the refractive index of the film, a Gaussian parameter characterizing surface roughness, and the film thickness itself. To demonstrate this technique, we have studied the deposition of silicon nitride films in a CVD reactor and how reactor temperature and reactant flow rates influence film growth. This technique may be applied to measure in situ reflectivity of multi layer films, so that reflectance as a function of temperature and time may be obtained. Because the measurement is simple and direct and the information is optical, we believe that this technique has the potential to supplant quartz oscillators in the measurement of thin film growth.

We describe FMCW reflectometry for characterization of long optical fibers by using an external-cavity laser diode as a light source. Since the optical path difference between the reference beam and the reflected beam from the optical fiber under test is much longer than the coherence length of the light source, the reference and the reflected beams are phase-decorrelated. As a result, the beat spectrum between the reference and the reflected beams is measured. In the phase-decorrelated FMCW reflectomety, the spatial resolution is enhanced by narrowing the spectral linewidth of the light source and increasing the repetition frequency of the optical frequency sweep as well as increasing the chirping range of the optical frequency sweep. In the experiments, an external-cavity DFB laser is used as a narrow linewidth light source, and the optical frequency is swept by minute modulation of the external cavity length. Long single mode optical fibers are characterized, and the maximum measurement range of 80 km is achieved, and the spatial resolutions of 46 m, 100 m and 2 km are achieved at 5 km, 11 km and 80 km distant, respectively. The Rayleigh backscattering is clearly measured and the propagation loss of optical fiber is also measured. The optical gain of an erbium-doped optical fiber amplifier (EDFA) is also estimated from the change in the Rayleigh backscattering level in the optical fiber followed after the EDFA.

We will discuss performance optimization of strain and temperature sensors based on long period fiber gratings (LPFGs) through control of the temperature sensitivity of the resonant peak shifts. Distinction between the effects of strain and temperature is a major concern for applications to communication and sensing. This was achieved in this work by suppressing or enhancing the temperature sensitivity by adjusting the doping concentrations of GeO2 and B2O3 in the core or cladding. The LPFGs were fabricated with a CO2 laser by the mechanical stress relaxation and microbending methods. The optimized temperature sensitivities were 0.002 nm/ for the suppressed case and 0.28 nm/ for the enhanced case, respectively. These LPFGs were used for simultaneous measurement of strain and temperature. The result indicates the rms errors of 23 µstrain for the strain and 1.3 for the temperature.

This paper describes a load carrying test for a concrete pipe designed to study the effectiveness of distributed strain measurement using an optical fiber sensor. We performed a load carrying test on a concrete pipe and attempted to detect the distributed strain inside it using an optical fiber sensor mounted inside the pipe. We confirmed that it was possible to detect the strain in a concrete structure by using an optical fiber sensor after a crack had occurred on the concrete surface. This paper shows that measurement using the optical fiber sensor was effective despite great changes in the strain conditions of the measured object over a short distance.

Characteristics of an FBG hydrophone are described under various conditions. The developed FBG hydrophone detects an acoustic field in water with good performances: linear response,high sensitivity,high stability,wide dynamic range as large as 90 dB and wide operation frequency range from a few kHz to a few MHz. A WDM FBG hydrophone consisting of two FBGs in serial connection can detect simultaneously amplitudes and phases of acoustic fields at different points,which in turn allows a directive measurement of an acoustic field in water.