Conventional localization techniques such as triangulation and multilateration are not reliable in non-line-of-sight (NLOS) environments such as dense urban areas. Although fingerprint-based localization techniques have been proposed to solve this problem, we may face difficulties because we do not know the parameters of the illegal radio when creating the fingerprint database. This paper proposes a novel technique to localize illegal radios in an urban environment by interpolating the channel impulse responses stored as fingerprints in a database. The proposed interpolation technique consists of interpolation in the bandwidth (delay), frequency and spatial domains. A localization algorithm that minimizes the squared error criterion is employed in this paper, and the proposed technique is evaluated through Monte Carlo simulations using location fingerprints obtained from ray-tracing simulations. Results show that utilizing an interpolated fingerprint database is advantageous in such scenarios.

The extensive study and design of Body Area Networks (BANs) and development of related applications have been an object of interest during the last few years. Indeed, the majority of applications have been developed to operate at frequencies up to X band. However nowadays, a new growing attention is being focused on moving the study of BANs to higher frequencies such as those in V andW bands. The characterization of the on-body propagation channel is therefore essential for the design of reliable mm-wave BAN systems. However the classical methods (FDTD, MoM, FEM) commonly used at lower frequencies are not computationally efficient at mm-wave due to the large amount of mesh elements needed to discretize an electrically large geometry such as the human body. To overcome this issue, a ray tracing technique, generally used for characterizing indoor propagation, has been used to analyze a specific channel: chest-to-belt link. The reliability of this high frequency method has been investigated in this paper considering three different test cases. Moreover, a comparison of simulations and measurements, both performed on a body centric scenario at 94GHz, is also presented as well.

Spatial correlation is an index for evaluating performance of multi-antenna systems. Although various equations exist, the distinction remains evasive. This paper presents applicable condition of equations for spatial correlation coefficient considering propagation channels. We reveal that under Rayleigh fading environments, the spatial correlation is properly evaluated by the equation based on three-dimensional radiation patterns, however, under environments with strong direct waves, the equation based on the channel matrix should be used for the evaluation.

This paper proposes new techniques to simulate a MIMO propagation channel using the ray-tracing method for the purpose of decreasing the computational complexity. These techniques simulate a MIMO propagation channel by substituting the propagation path between a particular combination of transmitter and receiver antennas for all combinations of transmitter and receiver antennas. The estimation accuracy calculated using the proposed techniques is evaluated based on comparison to the results calculated using imaging algorithms. The results show that the proposed techniques simulate a MIMO propagation channel with low computational complexity, and a high level of estimation accuracy is achieved using the proposed Vector-Rotation Approximation technique compared to that for the imaging algorithm.

Adaptive beamforming, using the Conjugate Gradient Normal Equation Residual problem, is applied to a base station array, in the UTRA-TDD up-link. A Wideband Directional Channel Model is used, characterising specific micro-cell, street-type scenarios. These differ in the number of mobile terminals, grouped and placed along the street axis, and on their distances to the base station. Time- and angle-of-arrival spreads, and on-the-air interference content are the main parameters inherently varied and analysed. The average beamforming gain and signal-to-noise ratio are evaluated, also varying the number of array elements. The high number of arriving correlated and closely correlated signals, together with the composed nature of the correlation matrix in the algorithm's cost function, result in that other than the MMSE solutions may lead to the best interference suppression, for the tested scenarios. Among the several weighted interfering power components, the most relevant is due to the delayed signals from all the other links. The combination of the number of arriving orthogonal codes, time-of-arrival and angle-of-arrival spreads condition beamforming performance: the number of array elements affect performance, depending on the mobile terminal distance to the base station, and on the number of active links; for short distances and large number of users, larger time-of-arrival spread degrades beamformer performance, over the opposing effect of angle-of-arrival spread; the number of active users affects beamforming gain especially in the case that delay spreads are larger, i.e., for shorter mobile terminal distances to the base station.

To enhance the anti-fading technique of direct sequence code division multiple access (DS/CDMA) schemes in land mobile radio communication systems, a two-dimensional RAKE reception (2D-RAKE) scheme in beam space digital beam forming (BS-DBF) antenna configuration is proposed. The proposed scheme is applied to cellular base stations where the received signals in the reverse link are relieved from multipath fading by means of enhanced RAKE combining in spacial and temporal domains. Fundamental performance in the reverse link under multipath fading environments is investigated by computer simulation applying a wideband propagation channel model.