This study is devoted to a half-wave dipole with a conductor plane at a distance much smaller than a quarter wavelength which we designate as an ultra low profile dipole (ULPD) antenna in this paper. The concerns of ULPD antenna are the feeding method and the impedance matching, because the input impedance usually tends to be lowered by the existence of a metallic structure in its proximity. In this paper, we propose a ULPD antenna with an excellent impedance matching and a coaxial feed built within the antenna structure so that the external matching and a balun are not required. A coaxial cable is used as a feed line and extended to be a half of a half wavelength dipole. The other half is made up of a parasitic element, which is connected to the outer conductor of the coaxial radiator. To make a matching, the outer conductor of the coaxial radiator is stripped off at a suitable length, and the total length of a dipole is considered for its resonance at a desired frequency of 2 GHz. The experiment has been conducted. The results show the return loss of -27 dB and the maximum gain of 9 dBi in the normal direction to the conductor plane. The computational results are also obtained, which agree well with the experimental results.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copy
Arpa THUMVICHIT, Tadashi TAKANO, Yukio KAMATA, "Ultra Low Profile Dipole Antenna with a Simplified Feeding Structure and a Parasitic Element" in IEICE TRANSACTIONS on Communications,
vol. E89-B, no. 2, pp. 576-580, February 2006, doi: 10.1093/ietcom/e89-b.2.576.
Abstract: This study is devoted to a half-wave dipole with a conductor plane at a distance much smaller than a quarter wavelength which we designate as an ultra low profile dipole (ULPD) antenna in this paper. The concerns of ULPD antenna are the feeding method and the impedance matching, because the input impedance usually tends to be lowered by the existence of a metallic structure in its proximity. In this paper, we propose a ULPD antenna with an excellent impedance matching and a coaxial feed built within the antenna structure so that the external matching and a balun are not required. A coaxial cable is used as a feed line and extended to be a half of a half wavelength dipole. The other half is made up of a parasitic element, which is connected to the outer conductor of the coaxial radiator. To make a matching, the outer conductor of the coaxial radiator is stripped off at a suitable length, and the total length of a dipole is considered for its resonance at a desired frequency of 2 GHz. The experiment has been conducted. The results show the return loss of -27 dB and the maximum gain of 9 dBi in the normal direction to the conductor plane. The computational results are also obtained, which agree well with the experimental results.
URL: https://global.ieice.org/en_transactions/communications/10.1093/ietcom/e89-b.2.576/_p
Copy
@ARTICLE{e89-b_2_576,
author={Arpa THUMVICHIT, Tadashi TAKANO, Yukio KAMATA, },
journal={IEICE TRANSACTIONS on Communications},
title={Ultra Low Profile Dipole Antenna with a Simplified Feeding Structure and a Parasitic Element},
year={2006},
volume={E89-B},
number={2},
pages={576-580},
abstract={This study is devoted to a half-wave dipole with a conductor plane at a distance much smaller than a quarter wavelength which we designate as an ultra low profile dipole (ULPD) antenna in this paper. The concerns of ULPD antenna are the feeding method and the impedance matching, because the input impedance usually tends to be lowered by the existence of a metallic structure in its proximity. In this paper, we propose a ULPD antenna with an excellent impedance matching and a coaxial feed built within the antenna structure so that the external matching and a balun are not required. A coaxial cable is used as a feed line and extended to be a half of a half wavelength dipole. The other half is made up of a parasitic element, which is connected to the outer conductor of the coaxial radiator. To make a matching, the outer conductor of the coaxial radiator is stripped off at a suitable length, and the total length of a dipole is considered for its resonance at a desired frequency of 2 GHz. The experiment has been conducted. The results show the return loss of -27 dB and the maximum gain of 9 dBi in the normal direction to the conductor plane. The computational results are also obtained, which agree well with the experimental results.},
keywords={},
doi={10.1093/ietcom/e89-b.2.576},
ISSN={1745-1345},
month={February},}
Copy
TY - JOUR
TI - Ultra Low Profile Dipole Antenna with a Simplified Feeding Structure and a Parasitic Element
T2 - IEICE TRANSACTIONS on Communications
SP - 576
EP - 580
AU - Arpa THUMVICHIT
AU - Tadashi TAKANO
AU - Yukio KAMATA
PY - 2006
DO - 10.1093/ietcom/e89-b.2.576
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E89-B
IS - 2
JA - IEICE TRANSACTIONS on Communications
Y1 - February 2006
AB - This study is devoted to a half-wave dipole with a conductor plane at a distance much smaller than a quarter wavelength which we designate as an ultra low profile dipole (ULPD) antenna in this paper. The concerns of ULPD antenna are the feeding method and the impedance matching, because the input impedance usually tends to be lowered by the existence of a metallic structure in its proximity. In this paper, we propose a ULPD antenna with an excellent impedance matching and a coaxial feed built within the antenna structure so that the external matching and a balun are not required. A coaxial cable is used as a feed line and extended to be a half of a half wavelength dipole. The other half is made up of a parasitic element, which is connected to the outer conductor of the coaxial radiator. To make a matching, the outer conductor of the coaxial radiator is stripped off at a suitable length, and the total length of a dipole is considered for its resonance at a desired frequency of 2 GHz. The experiment has been conducted. The results show the return loss of -27 dB and the maximum gain of 9 dBi in the normal direction to the conductor plane. The computational results are also obtained, which agree well with the experimental results.
ER -