Recent technical advances in WDM (Wavelength Division Multiplexing) technologies suggest that their practical application is imminent. By adopting WDM technologies in the transport network, a bandwidth abundant B-ISDN could be realized cost-effectively. This requires the introduction of WDM technologies, especially into the path layer. This paper explores optical path cross-connect (OPXC) nodes that offer very high levels of expandability because existing traffic demands, which are rather limited, must be efficiently supported while permitting easy step-wise expansion in capacity. This paper highlights modularity with regard to incoming/outgoing links. The OPXC architecture that offers the highest modularity is elaborated, and its transmission characteristics, optical loss and switching power consumption are evaluated. This paper also examines OPXC architecture considering the interface needed to connect electrical path cross-connects. The proposed OPXC architectures provide flexibility and minimum investment to encourage the early introduction of B-ISDN and also supports incremental network growth to match traffic demand. The design of OPXC parameters in terms of transmission performance is shown to ensure the applicability of the proposed OPXC architecture to long-haul optical fiber transmission networks. This is made possible with the low optical component losses offered by the OPXC. The proposed OPXC architectures will, therefore, be applied not only to regional networks, but also to global area networks. Thus they will play a key role in realizing the optical path infrastructure for the future bandwidth abundant B-ISDN.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copy
Atsushi WATANABE, Satoru OKAMOTO, Ken-ichi SATO, "Optical Path Cross-Connect Node Architecture Offering High Modularity for Virtual Wavelength Paths" in IEICE TRANSACTIONS on Communications,
vol. E78-B, no. 5, pp. 686-693, May 1995, doi: .
Abstract: Recent technical advances in WDM (Wavelength Division Multiplexing) technologies suggest that their practical application is imminent. By adopting WDM technologies in the transport network, a bandwidth abundant B-ISDN could be realized cost-effectively. This requires the introduction of WDM technologies, especially into the path layer. This paper explores optical path cross-connect (OPXC) nodes that offer very high levels of expandability because existing traffic demands, which are rather limited, must be efficiently supported while permitting easy step-wise expansion in capacity. This paper highlights modularity with regard to incoming/outgoing links. The OPXC architecture that offers the highest modularity is elaborated, and its transmission characteristics, optical loss and switching power consumption are evaluated. This paper also examines OPXC architecture considering the interface needed to connect electrical path cross-connects. The proposed OPXC architectures provide flexibility and minimum investment to encourage the early introduction of B-ISDN and also supports incremental network growth to match traffic demand. The design of OPXC parameters in terms of transmission performance is shown to ensure the applicability of the proposed OPXC architecture to long-haul optical fiber transmission networks. This is made possible with the low optical component losses offered by the OPXC. The proposed OPXC architectures will, therefore, be applied not only to regional networks, but also to global area networks. Thus they will play a key role in realizing the optical path infrastructure for the future bandwidth abundant B-ISDN.
URL: https://global.ieice.org/en_transactions/communications/10.1587/e78-b_5_686/_p
Copy
@ARTICLE{e78-b_5_686,
author={Atsushi WATANABE, Satoru OKAMOTO, Ken-ichi SATO, },
journal={IEICE TRANSACTIONS on Communications},
title={Optical Path Cross-Connect Node Architecture Offering High Modularity for Virtual Wavelength Paths},
year={1995},
volume={E78-B},
number={5},
pages={686-693},
abstract={Recent technical advances in WDM (Wavelength Division Multiplexing) technologies suggest that their practical application is imminent. By adopting WDM technologies in the transport network, a bandwidth abundant B-ISDN could be realized cost-effectively. This requires the introduction of WDM technologies, especially into the path layer. This paper explores optical path cross-connect (OPXC) nodes that offer very high levels of expandability because existing traffic demands, which are rather limited, must be efficiently supported while permitting easy step-wise expansion in capacity. This paper highlights modularity with regard to incoming/outgoing links. The OPXC architecture that offers the highest modularity is elaborated, and its transmission characteristics, optical loss and switching power consumption are evaluated. This paper also examines OPXC architecture considering the interface needed to connect electrical path cross-connects. The proposed OPXC architectures provide flexibility and minimum investment to encourage the early introduction of B-ISDN and also supports incremental network growth to match traffic demand. The design of OPXC parameters in terms of transmission performance is shown to ensure the applicability of the proposed OPXC architecture to long-haul optical fiber transmission networks. This is made possible with the low optical component losses offered by the OPXC. The proposed OPXC architectures will, therefore, be applied not only to regional networks, but also to global area networks. Thus they will play a key role in realizing the optical path infrastructure for the future bandwidth abundant B-ISDN.},
keywords={},
doi={},
ISSN={},
month={May},}
Copy
TY - JOUR
TI - Optical Path Cross-Connect Node Architecture Offering High Modularity for Virtual Wavelength Paths
T2 - IEICE TRANSACTIONS on Communications
SP - 686
EP - 693
AU - Atsushi WATANABE
AU - Satoru OKAMOTO
AU - Ken-ichi SATO
PY - 1995
DO -
JO - IEICE TRANSACTIONS on Communications
SN -
VL - E78-B
IS - 5
JA - IEICE TRANSACTIONS on Communications
Y1 - May 1995
AB - Recent technical advances in WDM (Wavelength Division Multiplexing) technologies suggest that their practical application is imminent. By adopting WDM technologies in the transport network, a bandwidth abundant B-ISDN could be realized cost-effectively. This requires the introduction of WDM technologies, especially into the path layer. This paper explores optical path cross-connect (OPXC) nodes that offer very high levels of expandability because existing traffic demands, which are rather limited, must be efficiently supported while permitting easy step-wise expansion in capacity. This paper highlights modularity with regard to incoming/outgoing links. The OPXC architecture that offers the highest modularity is elaborated, and its transmission characteristics, optical loss and switching power consumption are evaluated. This paper also examines OPXC architecture considering the interface needed to connect electrical path cross-connects. The proposed OPXC architectures provide flexibility and minimum investment to encourage the early introduction of B-ISDN and also supports incremental network growth to match traffic demand. The design of OPXC parameters in terms of transmission performance is shown to ensure the applicability of the proposed OPXC architecture to long-haul optical fiber transmission networks. This is made possible with the low optical component losses offered by the OPXC. The proposed OPXC architectures will, therefore, be applied not only to regional networks, but also to global area networks. Thus they will play a key role in realizing the optical path infrastructure for the future bandwidth abundant B-ISDN.
ER -