We have developed manganese-based lithium secondary battery technology as a part of a 10-year national project in Japan for The Development of Dispersed-Type Battery Energy Storage Technology. The cell chemistry we developed consisted of a modified graphite anode material containing dispersed Ag particles, and a partially substituted LiMn2O4 cathode with Li in the Mn sites. These materials showed a significant improvement in a cell's cycle life performance. The 250 Wh class single cell with the cell chemistry mentioned above showed energy densities of 131 Wh/kg and 295 Wh/dm3. The 2 kWh class module battery including 8 cells connected in series and a battery management system delivered energy densities of 122 Wh/kg and 255 Wh/dm3 that exceeded the final target of 120 Wh/kg and 240 Wh/dm3 for the project. Most of the target items for the battery performance were accomplished and proved. Thus the basis for practical application was developed, however, some areas concerning the further durability under various circumstances and conditions still remain to be accomplished. Continuous development for mass production and cost reduction is also expected for this technology in order to contribute to industry and society.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copy
Tatsuo HORIBA, Takenori ISHIZU, Tooru KOJIMA, Kenji TAKAHASHI, Mitsuru KOSEKI, Yasushi MURANAKA, "Development of Large-Sized Li Secondary Batteries" in IEICE TRANSACTIONS on Communications,
vol. E87-B, no. 12, pp. 3485-3489, December 2004, doi: .
Abstract: We have developed manganese-based lithium secondary battery technology as a part of a 10-year national project in Japan for The Development of Dispersed-Type Battery Energy Storage Technology. The cell chemistry we developed consisted of a modified graphite anode material containing dispersed Ag particles, and a partially substituted LiMn2O4 cathode with Li in the Mn sites. These materials showed a significant improvement in a cell's cycle life performance. The 250 Wh class single cell with the cell chemistry mentioned above showed energy densities of 131 Wh/kg and 295 Wh/dm3. The 2 kWh class module battery including 8 cells connected in series and a battery management system delivered energy densities of 122 Wh/kg and 255 Wh/dm3 that exceeded the final target of 120 Wh/kg and 240 Wh/dm3 for the project. Most of the target items for the battery performance were accomplished and proved. Thus the basis for practical application was developed, however, some areas concerning the further durability under various circumstances and conditions still remain to be accomplished. Continuous development for mass production and cost reduction is also expected for this technology in order to contribute to industry and society.
URL: https://global.ieice.org/en_transactions/communications/10.1587/e87-b_12_3485/_p
Copy
@ARTICLE{e87-b_12_3485,
author={Tatsuo HORIBA, Takenori ISHIZU, Tooru KOJIMA, Kenji TAKAHASHI, Mitsuru KOSEKI, Yasushi MURANAKA, },
journal={IEICE TRANSACTIONS on Communications},
title={Development of Large-Sized Li Secondary Batteries},
year={2004},
volume={E87-B},
number={12},
pages={3485-3489},
abstract={We have developed manganese-based lithium secondary battery technology as a part of a 10-year national project in Japan for The Development of Dispersed-Type Battery Energy Storage Technology. The cell chemistry we developed consisted of a modified graphite anode material containing dispersed Ag particles, and a partially substituted LiMn2O4 cathode with Li in the Mn sites. These materials showed a significant improvement in a cell's cycle life performance. The 250 Wh class single cell with the cell chemistry mentioned above showed energy densities of 131 Wh/kg and 295 Wh/dm3. The 2 kWh class module battery including 8 cells connected in series and a battery management system delivered energy densities of 122 Wh/kg and 255 Wh/dm3 that exceeded the final target of 120 Wh/kg and 240 Wh/dm3 for the project. Most of the target items for the battery performance were accomplished and proved. Thus the basis for practical application was developed, however, some areas concerning the further durability under various circumstances and conditions still remain to be accomplished. Continuous development for mass production and cost reduction is also expected for this technology in order to contribute to industry and society.},
keywords={},
doi={},
ISSN={},
month={December},}
Copy
TY - JOUR
TI - Development of Large-Sized Li Secondary Batteries
T2 - IEICE TRANSACTIONS on Communications
SP - 3485
EP - 3489
AU - Tatsuo HORIBA
AU - Takenori ISHIZU
AU - Tooru KOJIMA
AU - Kenji TAKAHASHI
AU - Mitsuru KOSEKI
AU - Yasushi MURANAKA
PY - 2004
DO -
JO - IEICE TRANSACTIONS on Communications
SN -
VL - E87-B
IS - 12
JA - IEICE TRANSACTIONS on Communications
Y1 - December 2004
AB - We have developed manganese-based lithium secondary battery technology as a part of a 10-year national project in Japan for The Development of Dispersed-Type Battery Energy Storage Technology. The cell chemistry we developed consisted of a modified graphite anode material containing dispersed Ag particles, and a partially substituted LiMn2O4 cathode with Li in the Mn sites. These materials showed a significant improvement in a cell's cycle life performance. The 250 Wh class single cell with the cell chemistry mentioned above showed energy densities of 131 Wh/kg and 295 Wh/dm3. The 2 kWh class module battery including 8 cells connected in series and a battery management system delivered energy densities of 122 Wh/kg and 255 Wh/dm3 that exceeded the final target of 120 Wh/kg and 240 Wh/dm3 for the project. Most of the target items for the battery performance were accomplished and proved. Thus the basis for practical application was developed, however, some areas concerning the further durability under various circumstances and conditions still remain to be accomplished. Continuous development for mass production and cost reduction is also expected for this technology in order to contribute to industry and society.
ER -