In this paper, a weighted multiple bit flipping (WMBF) algorithman for decoding low-density parity-check (LDPC) codes is proposed first. Then the improved WMBF algorithm which we call the efficient weighted bit-flipping (EWBF) algorithm is developed. The EWBF algorithm can dynamically choose either multiple bit-flipping or single bit-flipping in each iteration according to the log-likelihood ratio of the error probability of the received bits. Thus, it can efficiently increase the convergence speed of decoding and prevent the decoding process from falling into loop traps. Compared with the parallel weighted bit-flipping (PWBF) algorithm, the EWBF algorithm can achieve significantly lower computational complexity without performance degradation when the Euclidean geometry (EG)-LDPC codes are decoded. Furthermore, the flipping criterion does not require any parameter adjustment.

We have demonstrated crosstalk mitigation in single-mode MCFs using optical space coding. Four types of single-mode multicore fiber (MCF) models were evaluated by our scheme with the modified prime code and differential detection. Typically, intercore crosstalk was improved by 7-20 dB in 9-core fibers with an original crosstalk of 10-20 dB.

Wireless sensor networks usually deploy sensor nodes with limited energy resources in unattended environments so that people have difficulty in replacing or recharging the depleted devices. In order to balance the energy dissipation and prolong the network lifetime, this paper proposes a routing spanning tree-based clustering algorithm (RSTCA) which uses routing spanning tree to analyze clustering. In this study, the proposed scheme consists of three phases: setup phase, cluster head (CH) selection phase and steady phase. In the setup phase, several clusters are formed by adopting the K-means algorithm to balance network load on the basis of geographic location, which solves the randomness problem in traditional distributed clustering algorithm. Meanwhile, a conditional inter-cluster data traffic routing strategy is created to simplify the networks into subsystems. For the CH selection phase, a novel CH selection method, where CH is selected by a probability based on the residual energy of each node and its estimated next-time energy consumption as a function of distance, is formulated for optimizing the energy dissipation among the nodes in the same cluster. In the steady phase, an effective modification that counters the boundary node problem by adjusting the data traffic routing is designed. Additionally, by the simulation, the construction procedure of routing spanning tree (RST) and the effect of the three phases are presented. Finally, a comparison is made between the RSTCA and the current distributed clustering protocols such as LEACH and LEACH-DT. The results show that RSTCA outperforms other protocols in terms of network lifetime, energy dissipation and coverage ratio.

This paper proposes a novel multiple access method that enables concurrent sensor data streaming from multiple batteryless, wireless sensor tags. The access method is a pseudo-FDMA scheme based on the subcarrier backscatter communication principle, which is widely employed in passive RFID and radar systems. Concurrency is realized by assigning a dedicated subcarrier to each sensor tag and letting all sensor tags backscatter simultaneously. Because of the nature of the subcarrier, which is produced by constant rate switching of antenna impedance without any channel filter in the sensor tag, the tag-to-reader link always exhibits harmonics. Thus, it is important to reject harmonics when concurrent data streaming is required. This paper proposes a harmonics rejecting receiver to allow simultaneous multiple subcarrier usage. This paper particularly focuses on analog sensor data streaming which minimizes the functional requirements on the sensor tag and frequency bandwidth. The harmonics rejection receiver is realized by carefully handling group delay and phase delay of the subcarrier envelope and the carrier signal to accurately produce replica of the harmonics by introducing Hilbert and inverse Hilbert transformations. A numerical simulator with Simulink and a hardware implementation with USRP and LabVIEW have been developed. Simulations and experiments reveal that even if the CIR before harmonics rejection is 0dB, the proposed receiver recovers the original sensor data with over 0.98 cross-correlation.

In this paper, we propose a new spatial modulation (SM) scheme based on quaternary quasi-orthogonal sequences (Q-QOSs), referred to as Q-QOS-SM. First, the conventional SM and generalized-SM (GSM) schemes are reinterpreted as a new transmission scheme based on a spatial modulation matrix (SMM), whose column indices are used for the mapping of spatial-information bits unlike the conventional ones. Next, by adopting the SMM comprising the Q-QOSs, the proposed Q-QOS-SM that guarantees twice the number of spatial bits at a transmitter compared with the SM with a constraint of transmit antennas, is designed. From the computer-simulation results, the Q-QOS-SM is shown to achieve a greatly improved throughput compared with the conventional SM and GSM schemes, especially, for a large number of the receive antennas. This finding is mainly because the new scheme offers a much higher minimum Euclidean distance than the other schemes.

A relay assignment scheme is proposed in this paper that minimizes the mean delay of transmission for energy harvesting (EH) cooperative communication systems, whose source node and relay nodes are all equipped with energy harvesters. We jointly consider the long-term channel side information (CSI) and energy side information (ESI) of all nodes, and formulate the delay minimization problem as an integer programming problem. To solve this problem, a refined cyclic coordinate method (RCCM) is proposed that considers the cases of fixed-packet-length (FPL) and variable-packet-length (VPL) transmission. Simulation results show that the proposed scheme achieves performance close to that of the real-time relay selection (RRS) scheme with instantaneous CSI and ESI, which gives upper bound of the performance. Moreover, compared with the simple relay rotation (SRR) scheme where each relay has equal service time, the performance of the proposed scheme is significantly improved.

In this paper, we propose filter-and-forward beamforming (FF-BF) for cognitive two-way relay networks in which secondary users employ an orthogonal frequency-division multiplexing (OFDM) system. Secondary transceivers communicate with each other through multiple relays to obtain BF gain as well as to suppress the interference between the primary and secondary users who share the same spectrum. We consider two FF-BF design methods to optimize the relay filter. The first method enhances the quality of service of the secondary network by maximizing the worst subcarrier signal-to-interference-plus-noise ratio (SINR) subject to transmit power constraints. The second method suppresses the interference from the secondary network to the primary network through the minimization of the relay transmission power subject to subcarrier SINR constraints. Simulation results show that the proposed FF-BF improves system performance in comparison to amplify-and-forward relay BF.

In the advanced digital terrestrial/television multimedia broadcasting (DTMB-A) standard, a preamble based on distance detection (PBDD) is adopted for robust synchronization and signalling transmission. However, traditional signalling detection method will completely fail to work under severe frequency selective channels with ultra-long delay spread 0dB echoes. In this paper, a novel transmission parameter signalling detection method is proposed for the preamble in DTMB-A. Compared with the conventional signalling detection method, the proposed scheme works much better when the maximum channel delay is close to the length of the guard interval (GI). Both theoretical analyses and simulation results demonstrate that the proposed algorithm significantly improves the accuracy and robustness of detecting the transmitted signalling.

This study presents the design of a phase correlator for a digital frequency discriminator (DFD) that operates in the 2.0-6.0GHz frequency range. The accuracy of frequency discrimination as determined by the isolation of the correlator mixer was analyzed, and LO-RF isolation was found to have a significant effect on the frequency discrimination error by deriving various analytic equations related to the LO-RF isolation and phase performance. We propose a novel technique (phase sector compensation) to improve the accuracy of frequency discrimination. The phase sector compensation technique improved phase error by canceling the DC offset of the I and Q signals for only the frequency bands where the mixer's LO-RF isolation was below a specified limit. In the 2.0-6.0GHz range, the phase error of the designed phase correlator was decreased from 4.57° to 4.23° (RMS), and the frequency accuracy was improved from 1.02MHz to 0.95MHz (RMS). In the 4.8-6.0GHz range, the RMS phase error was improved from 5.59° to 4.12°, the frequency accuracy was improved from 1.24MHz to 0.92MHz, and the performance of the DFD correlator was improved by 26.3% in the frequency sector where LO-RF isolation was poor. Overall, the DFD correlator performance was improved by LO leakage compensation.