IEICE TRANSACTIONS on Electronics
All Si-Based Low Operating-Voltage and Low Power-Dissipation Device for Optical Interface
Summary :
Based on the Si CMOS process, a low operating voltage and low power light emitting device is presented. It has a power transfer efficiency of 1 to 2 orders higher than previous reports and can be used as a high efficiency photodiode. Configurations using the same structure as both the light emitter and the optical receiver, and employing a simple modulation instrument is then proposed for applications in the chip-to-chip optical alignment and the signal transmission. Only single power supply is required in the emitter-receiver circuits and is compatible with other integrated circuits made by the CMOS process.
- Publication
- IEICE TRANSACTIONS on Electronics Vol.E88-C No.7 pp.1490-1494
- Publication Date
- 2005/07/01
- Publicized
- Online ISSN
- DOI
- 10.1093/ietele/e88-c.7.1490
- Type of Manuscript
- PAPER
- Category
- Lasers, Quantum Electronics
Authors
Keyword
Latest Issue
Copyrights notice of machine-translated contents
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Cite this
Copy
Hsiu-Chih LEE, Shyh-Cheng LEE, Yi-Pin LIN, Cheng-Kuang LIU, "All Si-Based Low Operating-Voltage and Low Power-Dissipation Device for Optical Interface" in IEICE TRANSACTIONS on Electronics,
vol. E88-C, no. 7, pp. 1490-1494, July 2005, doi: 10.1093/ietele/e88-c.7.1490.
Abstract: Based on the Si CMOS process, a low operating voltage and low power light emitting device is presented. It has a power transfer efficiency of 1 to 2 orders higher than previous reports and can be used as a high efficiency photodiode. Configurations using the same structure as both the light emitter and the optical receiver, and employing a simple modulation instrument is then proposed for applications in the chip-to-chip optical alignment and the signal transmission. Only single power supply is required in the emitter-receiver circuits and is compatible with other integrated circuits made by the CMOS process.
URL: https://global.ieice.org/en_transactions/electronics/10.1093/ietele/e88-c.7.1490/_p
Copy
@ARTICLE{e88-c_7_1490,
author={Hsiu-Chih LEE, Shyh-Cheng LEE, Yi-Pin LIN, Cheng-Kuang LIU, },
journal={IEICE TRANSACTIONS on Electronics},
title={All Si-Based Low Operating-Voltage and Low Power-Dissipation Device for Optical Interface},
year={2005},
volume={E88-C},
number={7},
pages={1490-1494},
abstract={Based on the Si CMOS process, a low operating voltage and low power light emitting device is presented. It has a power transfer efficiency of 1 to 2 orders higher than previous reports and can be used as a high efficiency photodiode. Configurations using the same structure as both the light emitter and the optical receiver, and employing a simple modulation instrument is then proposed for applications in the chip-to-chip optical alignment and the signal transmission. Only single power supply is required in the emitter-receiver circuits and is compatible with other integrated circuits made by the CMOS process.},
keywords={},
doi={10.1093/ietele/e88-c.7.1490},
ISSN={},
month={July},}
Copy
TY - JOUR
TI - All Si-Based Low Operating-Voltage and Low Power-Dissipation Device for Optical Interface
T2 - IEICE TRANSACTIONS on Electronics
SP - 1490
EP - 1494
AU - Hsiu-Chih LEE
AU - Shyh-Cheng LEE
AU - Yi-Pin LIN
AU - Cheng-Kuang LIU
PY - 2005
DO - 10.1093/ietele/e88-c.7.1490
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E88-C
IS - 7
JA - IEICE TRANSACTIONS on Electronics
Y1 - July 2005
AB - Based on the Si CMOS process, a low operating voltage and low power light emitting device is presented. It has a power transfer efficiency of 1 to 2 orders higher than previous reports and can be used as a high efficiency photodiode. Configurations using the same structure as both the light emitter and the optical receiver, and employing a simple modulation instrument is then proposed for applications in the chip-to-chip optical alignment and the signal transmission. Only single power supply is required in the emitter-receiver circuits and is compatible with other integrated circuits made by the CMOS process.
ER -
English
